Manage stand orders
Select Option

Medihightec Medical Co., Ltd.

4F, No. 180, Fu 1st Street, Cidu District, 20650 Keelung City
Taiwan
Telephone +886 2 24519988
Fax +886 2 24511796
sales@medihightec.com

Contact

Roger Hung

Phone
+886 2 24519988

Email
sales@medihightec.com

Our products

Product category: Electro-therapy equipment

MH8001 Four Channels Pre-Programmed TENS and EMS

MH8001 Four Channels Pre-Programmed TENS and EMS
The MH8001 Four Channels Pre-Programmed unit integrates EMS and TENS functions with 45 preset programs and 5 programmable programs. The preset programs are prepared in the factory according to the customer’s parameters. The programmable programs are available to be set and stored by user. This unit is a hybrid stimulator which is designed for muscle stimulation and pain relief.
Features:
■ TENS and EMS Two in one
■ The 3 treatment phases Warming up, Treatment and Recover
for each Programs
■ Large LCD Display easier for elder users to read
■ DC 9V battery and / or mains power adaptor
■ Key Pad control, auto-locked to avoid accidental touch
■ Adjusting Intensity Level precisely
■ Clear Treatment Time
■ Compliance Meter, 100 sets of therapy session records
■ ON and OFF time indicator
■ Low battery indicator
SPECIFICATION
S: EMS Synchronous, A: EMS Alternate, N: Normal, M: Mixed Frequency, B: Burst, SD: Width Modulation, MR: Rate Modulation
Channel:Four, isolated between channels
Preset programs:45 preset TENS or EMS programs, prepared in the factory according to the customer’s parameter
Programmable programs:5 programmable programs are available for setting by user
Intensity:Adjustable 0-100mA, Max output 100mA peak to peak into 500ohm load each channel.
Wave form:Asymmetrical rectangular biphasic pulse.
Intensity:Adjustable 0-100mA, Max output 100mA peak to peak into 500ohm load each channel.
Power source:DC 9V battery and / or mains power adaptor.
Size:13.5(L)x9(W)x2.7(H)(cm)
Weight:163 grams
Pulse Rate:2Hz~20 Hz in 1 Hz/step and 20~ 120 Hz in 5 Hz/step.
Pulse Width:50uS~400uS, 10uS/step
Output mode:S, A, N, M, B, SD, MR
ON (Contraction) Time:2~90 seconds
OFF (Relaxation) Time:2~90 seconds
Ramp-up Time:1~8 seconds
Ramp-down Time:1~8 seconds
Timer:5~90 Minutes or continue.
COMPLIANCE TIMER:The patient compliance timer can memorize 100 sets of therapy session records; the total record time is 400 hours; 240 minutes for a single therapy session.
Electrode Detection:Option function, Only active in Pulse Width from 100uS and 300uS.

More Less

Product category: Electro-therapy equipment

MH8002 Four Channels TENS and EMS Combo

MH8002 Four Channels TENS and EMS Combo
The MH8002 Four Channels unit integrates EMS and TENS functions with 7 treatment modes. This unit is a hybrid stimulator which is designed for muscle stimulation and pain relief.

Features:
■ TENS and EMS Two in one
■ Large LCD Display easier for elder users to read
■ DC 9V battery and / or mains power adaptor
■ Key Pad control, auto-locked to avoid accidental touch
■ Adjusting Intensity Level precisely
■ Clear Treatment Time
■ Compliance Meter, 100 sets of therapy session records
■ ON and OFF time indicator
■ Low battery indicator
SPECIFICATION
S: EMS Synchronous, A: EMS Alternate, N: Normal, M: Mixed Frequency, B: Burst, SD: Width Modulation, MR: Rate Modulation
Channel:Four, isolated between channels
Intensity:Adjustable 0-100mA, Max output 100mA peak to peak into 500ohm load each channel.
Wave form:Asymmetrical rectangular biphasic pulse.
Intensity:Adjustable 0-100mA, Max output 100mA peak to peak into 500ohm load each channel.
Power source:DC 9V battery and / or mains power adaptor.
Size:13.5(L)x9(W)x2.7(H)(cm)
Weight:163 grams
Pulse Rate:2Hz~20 Hz in 1 Hz/step and 20~ 120 Hz in 5 Hz/step.
Pulse Width:50uS~400uS, 10uS/step
Output mode:S, A, N, M, B, SD, MR
ON (Contraction) Time:2~90 seconds
OFF (Relaxation) Time:2~90 seconds
Ramp-up Time:1~8 seconds
Ramp-down Time:1~8 seconds
Timer:5~90 Minutes or continue.
COMPLIANCE TIMER:The patient compliance timer can memorize 100 sets of therapy session records; the total record time is 400 hours; 240 minutes for a single therapy session.
Electrode Detection:Option function, Only active in Pulse Width from 100uS and 300uS.

More Less

Product category: Electro-therapy equipment

MH8306 Two Channels Pre-Programmed TENS and EMS

MH8306 Two Channels Pre-Programmed TENS and EMS
The MH8306 Two Channels Pre-Programmed unit integrates EMS and TENS functions with 45 preset programs and 5 programmable programs. The preset programs are prepared in the factory according to the customer’s parameters. The programmable programs are available to be set and stored by user. This unit is a hybrid stimulator which is designed for muscle stimulation and pain relief.
Features:
■ TENS and EMS Two in one
■ The 3 treatment phases Warming up, Treatment and Recover
for each Programs
■ Large LCD Display easier for elder users to read
■ DC 9V battery and / or mains power adaptor
■ Key Pad control, auto-locked to avoid accidental touch
■ Adjusting Intensity Level precisely
■ Clear Treatment Time
■ Compliance Meter, 100 sets of therapy session records
■ ON and OFF time indicator
■ Low battery indicator
SPECIFICATION
S: EMS Synchronous, A: EMS Alternate, N: Normal, M: Mixed Frequency, B: Burst, SD: Width Modulation, MR: Rate Modulation
Channel:Two, isolated between channels
Preset programs:45 preset TENS or EMS programs, prepared in the factory according to the customer’s parameter
Programmable programs:5 programmable programs are available for setting by user
Intensity:Adjustable 0-100mA, Max output 100mA peak to peak into 500ohm load each channel.
Wave form:Asymmetrical rectangular biphasic pulse.
Intensity:Adjustable 0-100mA, Max output 100mA peak to peak into 500ohm load each channel.
Power source:DC 9V battery and / or mains power adaptor.
Size:13.5(L)x7(W)x2.7(H)(cm)
Weight:163 grams
Pulse Rate:2Hz~20 Hz in 1 Hz/step and 20~ 120 Hz in 5 Hz/step.
Pulse Width:50uS~400uS, 10uS/step
Output mode:S, A, N, M, B, SD, MR
ON (Contraction) Time:2~90 seconds
OFF (Relaxation) Time:2~90 seconds
Ramp-up Time:1~8 seconds
Ramp-down Time:1~8 seconds
Timer:5~90 Minutes or continue.
COMPLIANCE TIMER:The patient compliance timer can memorize 100 sets of therapy session records; the total record time is 400 hours; 240 minutes for a single therapy session.

More Less

Product category: Electro-therapy equipment

MH8000 Pre-Programmed TENS and EMS

The MH8000 Pre-Programmed unit integrates EMS and TENS functions with 27 preset programs and 3 programmable programs. The preset programs are prepared in the factory according to the customer's parameters. The programmable programs are available to be set and stored by user.
Features:
■ Our products have new technique for a comfortable output waveform.
■ TENS and EMS Two in one, our products support full TENS and EMS functions with 7 treatment modes, ideal for home health care.
■ Dual Power source: Mains power adaptor or DC 9V battery.
■ The 3 treatment phases Warming up, Treatment and Recover for each Preset Programs.
■ Large Liquid Crystal Display (LCD): Large LCD can display intensity level, settings and treatment timer at the same time. The information shown in a large font can make it easier for elder users to read.
■Key Pad control, Power, intensity level and parameter are input by Key pad. It's easy for users to input their settings. All buttons will be auto-locked after 30 seconds idle time to avoid accidental touch.
■ Adjusting Intensity Level precisely: fully digital designed, the Intensity level control by keypad buttons, Intensity Level can be increased from 0 by 1mA each step up to 80mA. Precise and smooth adjustments in Intensity Level can prevent the user a sudden adjusting the intensity of too much danger.
■ Clear Treatment Time: The treatment time count down and the balance treatment time can be read from the LCD.
■ Compliance Meter: Doctors can tell whether a patient could continue treatment in accordance with the instructions. The patient compliance timer can memorize 100 sets of therapy session records; the total record time is 400 hours.
■ ON and OFF time indicator: For EMS function, the Intensity Level that displays on the LCD screen will accordingly switch among Ramp time, ON time and OFF time. This makes it easier for the patient to know to turn up the intensity only during the ON Time, otherwise, the patient might accidentally turn the amplitude way up during the OFF Time, and suddenly have too much stimulation when the unit comes back to ON Time
■LOW< BATTERY> INDICATOR: A low battery indicator will flashes on the LCD only when the battery is low.
■ Our products all components are made in Taiwan, we assemble products in Taiwan, and we assure our quality.
The device detailed information:
1. Dual Channel, isolated between channels.
2. Timer setting from 5-90 Minutes, 5min./step, or continue.
3. Time count down monitored on LCD screen.
4. Automatic switch off after 30 seconds if unit is not in use.
5. CE 2460, FDA (510k)
6. Waveform: Asymmetrical rectangular biphasic pulse.
7. Amplitude: 0 - 80 mA into 500 ohm load.
8. Selectable pulse width: Adjustable, from 50us - 300us, 10us/step.
9. Pulse Rate: Adjustable, from 2 Hz - 150 Hz, 2Hz~20 Hz in 1 Hz/step and 20~ 150 Hz in 5 Hz/step.
10. Modes for EMS:
The EMS is an intermittent stimulation. The pulse active and inactive duration are adjustable by setting ON time and OFF time. The contraction gradually increases during ramp-up time and reaches maximum contraction during ON time. During ramp-down time, the contraction gradually decreases until the OFF time starts.
S (Synchronous) Mode:
Stimulation of both channels will occur simultaneously.
A (Alternate) Mode:
Stimulation of Channel 1 and Channel 2 will occur alternately.
11. Modes for TENS:
N (Normal) Mode:
Continuous output, pulse rate and pulse width are adjustable.
M (Mixed Frequency) Mode:
This mode has a combination of high and low frequency stimulation. Per cycle time is 6 seconds. Each cycle contains two phases. During the first 3 sec. phase, the Pulse Rate runs at high-frequency, then during the second 3 sec. phase, the Pulse Rate runs at low-frequency. The cycle is then repeated. The low-frequency is fixed at 2 Hz. The high-frequency is adjustable from 2 to 150 Hz in which from 2 to 20 Hz at 1 Hz per step and from 20 to 150 Hz at 5 Hz per step.
B (Burst) Mode:
Pulse width is adjustable from 50~300uS in 10uS per step, Frequency is fixed at 100 Hz, Burst rate is fixed at 2 Hz.
SD (Width Modulation) Mode:
Pulse Width is modulated over a period of 3 seconds from its original setting value down to 60% of its setting, then modulated over another 3 seconds period at its original value. The cycle is then repeated. Per cycle time is 6 seconds.
MR (Rate Modulation) Mode:
Pulse Rate is modulated over a period of 3 seconds from its original setting value down to 60% of its setting, then modulated over another 3 seconds period at its original setting. The cycle is then repeated. Per cycle time is 6 seconds.
12. Contraction Time: Adjustable, from 2-90 seconds, 1sec./step, (EMS only).
13. Relaxation Time: Adjustable, from 2-90 seconds, 1sec./step, (EMS only).
14. Ramp Time: Adjustable, from 1-8 seconds, 1sec./step, (EMS only).
15. Patient compliance meter: The patient compliance timer can memorize 100 sets of therapy session records; the total record time is 400 hours; 240 minutes for a single therapy session.
16. Digital LCD display.
17. Low battery indicator.
18. Dual Power source: Mains power adaptor or DC 9V battery.
19. Tolerance: +/- 10%

More Less

Product category: Electro-therapy equipment

MH8305 Two Channels Pre-Programmed TENS and EMS

The MH8305 Pre-Programmed unit integrates EMS and TENS functions with 27 preset programs and 3 programmable programs. The preset programs are prepared in the factory according to the customer's parameters. The programmable programs are available to be set and stored by user.
Features:
■ Our products have new technique for a comfortable output waveform.
■ TENS and EMS Two in one, our products support full TENS and EMS functions with 7 treatment modes, ideal for home health care.
■ Dual Power source: Mains power adaptor or DC 9V battery.
■ The 3 treatment phases Warming up, Treatment and Recover for each Preset Programs.
■ Large Liquid Crystal Display (LCD): Large LCD can display intensity level, settings and treatment timer at the same time. The information shown in a large font can make it easier for elder users to read.
■Key Pad control, Power, intensity level and parameter are input by Key pad. It's easy for users to input their settings. All buttons will be auto-locked after 30 seconds idle time to avoid accidental touch.
■ Adjusting Intensity Level precisely: fully digital designed, the Intensity level control by keypad buttons, Intensity Level can be increased from 0 by 1mA each step up to 80mA. Precise and smooth adjustments in Intensity Level can prevent the user a sudden adjusting the intensity of too much danger.
■ Clear Treatment Time: The treatment time count down and the balance treatment time can be read from the LCD.
■ Compliance Meter: Doctors can tell whether a patient could continue treatment in accordance with the instructions. The patient compliance timer can memorize 100 sets of therapy session records; the total record time is 400 hours.
■ ON and OFF time indicator: For EMS function, the Intensity Level that displays on the LCD screen will accordingly switch among Ramp time, ON time and OFF time. This makes it easier for the patient to know to turn up the intensity only during the ON Time, otherwise, the patient might accidentally turn the amplitude way up during the OFF Time, and suddenly have too much stimulation when the unit comes back to ON Time
■LOW< BATTERY> INDICATOR: A low battery indicator will flashes on the LCD only when the battery is low.
■ Our products all components are made in Taiwan, we assemble products in Taiwan, and we assure our quality.
The device detailed information:
1. Dual Channel, isolated between channels.
2. Timer setting from 5-90 Minutes, 5min./step, or continue.
3. Time count down monitored on LCD screen.
4. Automatic switch off after 30 seconds if unit is not in use.
5. CE 2460, FDA (510k)
6. Waveform: Asymmetrical rectangular biphasic pulse.
7. Amplitude: 0 - 100 mA into 500 ohm load.
8. Selectable pulse width: Adjustable, from 50us - 300us, 10us/step.
9. Pulse Rate: Adjustable, from 2 Hz - 150 Hz, 2Hz~20 Hz in 1 Hz/step and 20~ 150 Hz in 5 Hz/step.
10. Modes for EMS:
The EMS is an intermittent stimulation. The pulse active and inactive duration are adjustable by setting ON time and OFF time. The contraction gradually increases during ramp-up time and reaches maximum contraction during ON time. During ramp-down time, the contraction gradually decreases until the OFF time starts.
S (Synchronous) Mode:
Stimulation of both channels will occur simultaneously.
A (Alternate) Mode:
Stimulation of Channel 1 and Channel 2 will occur alternately.
11. Modes for TENS:
N (Normal) Mode:
Continuous output, pulse rate and pulse width are adjustable.
M (Mixed Frequency) Mode:
This mode has a combination of high and low frequency stimulation. Per cycle time is 6 seconds. Each cycle contains two phases. During the first 3 sec. phase, the Pulse Rate runs at high-frequency, then during the second 3 sec. phase, the Pulse Rate runs at low-frequency. The cycle is then repeated. The low-frequency is fixed at 2 Hz. The high-frequency is adjustable from 2 to 150 Hz in which from 2 to 20 Hz at 1 Hz per step and from 20 to 150 Hz at 5 Hz per step.
B (Burst) Mode:
Pulse width is adjustable from 50~300uS in 10uS per step, Frequency is fixed at 100 Hz, Burst rate is fixed at 2 Hz.
SD (Width Modulation) Mode:
Pulse Width is modulated over a period of 3 seconds from its original setting value down to 60% of its setting, then modulated over another 3 seconds period at its original value. The cycle is then repeated. Per cycle time is 6 seconds.
MR (Rate Modulation) Mode:
Pulse Rate is modulated over a period of 3 seconds from its original setting value down to 60% of its setting, then modulated over another 3 seconds period at its original setting. The cycle is then repeated. Per cycle time is 6 seconds.
12. Contraction Time: Adjustable, from 2-90 seconds, 1sec./step, (EMS only).
13. Relaxation Time: Adjustable, from 2-90 seconds, 1sec./step, (EMS only).
14. Ramp Time: Adjustable, from 1-8 seconds, 1sec./step, (EMS only).
15. Patient compliance meter: The patient compliance timer can memorize 100 sets of therapy session records; the total record time is 400 hours; 240 minutes for a single therapy session.
16. Digital LCD display.
17. Low battery indicator.
18. Dual Power source: Mains power adaptor or DC 9V battery.
19. Tolerance: +/- 10%

More Less

Product category: Electro-therapy equipment

H8200P Obstetric TENS, for Woman Before, During and After Childbirth

The MH8200P Obstetric TENS with 5 preset programs and 3 programmable programs. The preset programs are prepared in the factory according to the customer's parameters. The programmable programs are available to be set and stored by user.
The Programs:
P1-P3: Programmable programs.
P4: Pain relief during childbirth.
P5: During and after pregnancy for pain relief pelvis, back and neck.
P6: During and after pregnancy for massage.
P7: During and after pregnancy for circulation.
P8: After pregnancy for get back in shape.

More Less

Product category: Electro-therapy equipment

CHICSTIM Pre-Programmed INCONTINENCE TENS and EMS

For INCONTINENCE TREATMENT and REHABILITATION
The CHICSTIM INCONTINENCE TENS and EMS with 6 preset programs and 3 programmable programs. The preset programs are prepared in the factory according to the customer’s parameters. The programmable programs are available to be set and stored by user.
The Programs:
P1-P3: Programmable programs.
P4: STRESS INCONTINENCE.
P5: URGE INCONTINENCE.
P6: MIXED INCONTINENCE.
P7: TONE Program.
P8: TENS, for PAIN RELIEF.
P9: BURST TENS, for URINARY INCONTINENCE.

More Less

Product category: Electro-therapy equipment

MH6000P Pre-Programmed TENS and EMS

The MH6000P Pre-Programmed TENS and EMS
The unit integrates EMS and TENS functions with 9 preset programs and 3 programmable programs.
The preset programs are prepared in the factory according to the customer’s parameters.
The programmable programs are available to be set and stored by user.

This unit is a hybrid stimulator which is designed for muscle stimulation and pain relief. It is portable, light weight and battery-powered electronic unit. Electrical Muscle Stimulation (EMS) is an advanced muscle exercise and toning technique that is an efficiently & effectively supplement to your workout routine. EMS units are designed to exercise body muscles by applying a chosen intensity and frequency of electrical current repeatedly in a series of stimulated contraction & relaxation phases. Transcutaneous Electrical Nerve Stimulation (TENS), designed for symptomatic relief and management of chronic intractable pain. TENS is a safe non-invasive drug-free method of pain management. “Transcutaneous” means across the skin. It relieves pain by sending tiny electrical impulses through electrodes placed on or near the area of pain or pressure point to underlying nerve fibers.

More Less

About us

Company details

MEDIHIGHTEC MEDICAL, located in Taiwan, is a professional electrotherapy products manufacturer and exporter. The Company acquires ISO13485 and ISO9001 quality system certificated and registered by DNV GL NEMKO PRESAFE AS. Our products are CE2460 listed with MDD of EC, and approved for sale in the USA by FDA (510k). Experienced and sophisticated R&D team dedicates to electrotherapy field for years. Private label and ODM are welcome.
Products:
TENS and EMS devices, Electrical Stimulator for muscle training and pain relief,
Transcutaneous Electrical Nerve Stimulation (TENS),
Neuromuscular Electrical Stimulation (EMS),
Adhesive Electrodes for TENS, EMG and Neuromuscular Stimulation Applications,
Accessories for TENS and EMS Stimulators.

More Less

Company data

Export content

> 75%

Number of employees

50-99

Area of business
  • Electromedical equipment / Medical Technology
  • Physiotherapy / Orthopaedic Technology

Company information as a PDF file