Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
All Pro Corporation
No. 237, Wannianquan Road,,
266199
Qingdao, Shandong
China
China
Telephone +86 532 82812277
Fax +86 532 82812299
market@allprocorporation.com
http://www.allprocorporation.com
Fax +86 532 82812299
market@allprocorporation.com
http://www.allprocorporation.com
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
This company is co-exhibitor of
China Chamber of Commerce for Import & Export of Medicines & Health Products
Media files
Our range of products
Product categories
- 01 Electromedical equipment / medical technology
- 01.09 Hospital equipment, care equipment
- 01.09.02 Patient beds and nursing beds
Patient beds and nursing beds
- Eight Functions Electric Hospital Bed
- Five Functions Electric Hospital Bed
- Five Functions Electrice Hospital Bed
- Five Functions Electric Hospital Bed
- Manual Children Bed (Backrest)
- Five Functions Electric Hospital Bed
- Double Crank Hospital Children Bed (backrest & footrest)
- Electric operation table (electric hydraulic) KL-D.III (New Model)
- Hydraulic transfer stretcher Trolley
- Operation Transfer Trolley
- Electric operation table (electric hydraulic) KL-D.IA-I
- Electric operation table (electric gear) DL.A
- Luxurious Hydralic Stretcher Trolley
- Electric operation table (electric gear) DL.C-I
- Stain less Steel One Function Manual Bed
- Electric ophthalmic operation table (electric hydraulic) KL-YS.A
- Stainless Steel Two Functions Manual Bed
- Electric ophthalmic operation table (electric hydraulic) KL-YS.B
- One Functions Manual Hospital Bed
- Universal operation table (manual) JY.A
- One Functions Manual Hospital Bed
- Universal operation table (manual) JY.C
- Two Functions Manual Hospital Bed
- Five Functions Electric Hospital Bed
- Two Functions Manual Hospital Bed
- Three Functions Manual Hospital Bed
- Five Functions Electric Hospital Bed
- Three Functi ons Manual Hospital Bed
- Universal operation table (manual) JY.D
- Electric obstetric bed (electric gear) KL-CB.II
- Three Functions Manual Hospital Bed
- Electric gynecological diagnosing table (electric gear) KL-FS.I NEW
- Electric gynecological diagnosing table (electric gear) KL-FS.V
- Electric gynecological diagnosing table (electric gear) KL-FS.II
- Gynecological diagnosing table (manual) KL-FS.III
- Multifunctional operation table (manual&two side control) 3001
- Three Functions Electrice Hospital Bed
- Three Functions Electric Home Care Bed
- Multifunctional operation table (manual&two side control) 3001A
- Three Functions Electrice Hospital Bed
- Multifunctional operation table (manual&two side control) 3001B
- Three Functions Electric Home Care Bed
- Multifunctional operation table (manual&head control) 3008
- Three Functions Electric Home Care Bed
- Multifunctional operation table (manual&head control) 3008A
- Three Functions Electrice Hospital Bed
- Three Functons Electric Home Care Bed
- Three Functions Electrice Hospital Bed
- Three Functions Electric Home Care Bed
- Three Functions Electrice Hospital Bed
- Medical Disposable PE Apron
- 02 Laboratory technology
- 02.09 Laboratory equipment
Laboratory equipment
- Small Size Low Speed low price of lab Centrifuge Machine 80-1
- Manufacture XSZ-107BN Biological Microscope
- XSZ-107BN Digital Biological Microscope
- Laboratory TD4A-WS Desktop Low Speed Centrifuge with 12 holes
- Plasma Gel maker and Bio filler maker
- Factory price Laboratory SH120 high Speed centrifuge machine medical technology centrifuge
- XC-A30 ESR Analyzer
- XI-921 electrolyte analyzer
- Laboratory DM0408 Low speed centrifuge with A8-15P rotor standard
- Laboratory Shaking Incubator/ Lab Shaker/ Incubator shaker
- CO2 Incubator/ Benchtop CO2 Incubator/ Carbon Dioxide Incubator
- L101 Student Biological Monocular Microscope With Factory Price
- Medicine Stability Temperature And Humidity Testing Chamber
- Laboratory water bath W420 Cycle Water Bath Microprocessor control Microprocessor control oil bath
- Laboratory Anaerobic Incubator
- Automatic Haematology Analyzer
- Laboratory Cooling Incubator/ Biochemical Incubator
- 0.1ul-10ml Lab adjustable volume micropipettor/pipettor/transferpettor/pipette
- low speed DM 0412S portable laboratory centrifuge/ medical centrifuge/ electric centrifuge
- medical/laboratory digital magnetic hotplate stirrers
- Laboratory 80-2 Low Speed Centrifuge
- Laboratory 80-1 Low Speed Centrifuge
- Laboratory 80-2B Low Speed Centrifuge
- Laboratory Portable D1008 Palm Micro Centrifuge
- Lab DLAB Pipette Stand
- Laboratory Blood Mixer roller for blood tube mixer
- Digital Bottle Top Dispenser-dFlow-Without Brown reagent bottle
- OS20-Pro LCD Digital Overhead Stirrer Max. stirring quantity 20L
- Laboratory 3.5 inch EcoStir Economical hot plate magnetic stirrer Factory price digital magnetic hotplate stirrer
- Hot sale CT-3180 3-part differential Fully Automatic Hematology analyzer with factory price
- Factory price Cheapest N-800M Trinocular Biological Microscope
- SK-D1807-E Shaker
- Factory price binocular polarizing microscope xp-213 cheapest laboratory polarizing microscope
- Dragob Lab Brand Levo Plus Pipette Filler with 0.1-100ml Glass or Plastic Pipette
- TD5A - WS centrifuge table low speed specification
- TDZ5A-WS desktop low speed centrifuge instructions
- LCB Clean bench( Horizontal Type)
- SK-D3309-Pro Shaker
- SK-L180-E Shaker
- SK-L180-Pro Shaker
- SK-L180-S Shaker
- SK-L330-Pro Shaker
- SK-O180-E Shaker
- LCD Digital Magnetic Hotplate Stirrer
- LCD 4-Channel Digital Magnetic Hotplate Stirrer
- Alloy-Bead Heating Bath
- SK-O180-S Shaker
- LED Hotplate
- SK-O330-Pro Sharker
- SK-R330-Pro Shaker
- SK-R1807-E Shaker
- THERMOSTIC & HUMIDITY INCUBATOR
- Dry Oven
- VACUUM DRY OVEN
- 211B SHAKING INCUBATOR
- AUTOMATIC STEEL STERILIZER
- LCD Digital Rotator
- Vacuum Aspiration Systems
- Thermal Cycler Standard
- Real-Time PCR System
- Emergency Thermal Blanket
- Medical Anesthesia Face Mask
- Medical Disposable PE Apron
- 05 Commodities and consumer goods
- 05.07 Disposables
- 05.07.01 Disposable articles for hospitals
Disposable articles for hospitals
- Disposable Plastic Transfer Pasteur Pipette
- Transport Specimen Swab
- Specimen Collection Nylon Flocked Swabs
- Laboratory PipetteTips with Filter
- Laboratory PS/PP Test Tube
- Medical Nasal Oxygen Cannula For Surgical
- Pen Type Blood Collection Needle
- Elastic Cold Bandage
- First Aid Combat Tourniquet Military
- 5L Medical Biohazard Safety Cardboard Box Sharp Container
- Electric Hot Water Bag Rechargeable
- Central Venous Catheter CVC Kit
- Blood Collection Needle Holder
- Disposable Sterile Twist Blood Lancet
- Alcohol Pad Large Size
- High Quality Cheap 2.0ml DNA / RNA Mini Spin Columns
- Carbon Fiber Scoop Stretcher
- Medical Digital Thermometer
- Portable NPWT Negative Pressure Wound Therapy Device Kit
- Disposable Wooden Tongue Depressor Sterile Package
- Butterfly Blood Collection Needle
- Examination Disposable Nitrile Gloves
- Digital Infrared Thermometer
- Adjustable Pediatric Philadelphia The Collars
- Sterile Paraffin Gauze Dressing
- Personal Protection Coverall With Hood
- Full Face Protection Shield Mask
- Disposable Medical Surgical Suture Thread With Needle
- Orthopedic Plaster Of Paris Cast Bandage
- Disposable Arthroscopy Trocar
- Disposable Non-Woven Face Mask With Ear Loop
- Enema Douche Bag Kit
- Silicone Foley Catheter With Or Without Balloon
- Medical CPR Mouth To Mouth Rescue Breathing Mask
- Medical Protective Comfortable Goggles
- Back Protection Belt
- Kinesiology Tape Sport
- First Aid Kit
- FFP2 with Fliter Respirator
- Emergency Thermal Blanket
- Latex Rubber Hand Gloves
- Medical Deep Breathing Lung Exerciser Incentive Spirometer Three Balls Spirometer
- Disposable Latex Examination Glove
- 200ML CT High Pressure Nemoto/Medrad Injector Integra Syringe Angiography Syringe
- Cervical Collar Neck Brace
- Isopropyl Alcohol Swab Stick
- Military Trauma Bandage Medical Israeli Bandage
- Plastic Lab Centrifuge Tube
- Disposable Safety Blood Lancet Needle
- I.V. Cannula With Injection Port I.V. Catheter
- Medical Anesthesia Face Mask
- Orthopedic Cast Pad
- Cotton Wool Roll
- Sterile Medical Cotton Swab Stick
- Medical Autoclave Sterilization Indicator Tape
- Disposable AV Fistula Needle For Dialysis Use
- Medical Urine Specimen Cup
- Pushing/Crossing Valve Disposable Urine Bag
- Ultrasound Gel For Medical Use
- PE Adhesive Tape
- PE Plastic Transparent Polyethylene Gloves
- PE Neck Cervical Collar
- Medical Disposable PE Apron
- Platelet Rich Plasma PRP Kit
- Vinyl examination gloves
- Disposable Hypodermic Needle
- Umbilical Cord Clamp
- Endotracheal Tube Oral/Nasal
- Viral Transport Tube With Swab
- Hot Water Bag
- Disposable Medical Latex Foley
- Non Woven Gauze Swab Pad Dressing
- Medical Gauze Roll Bandage
- Medical Absorbent Gauze Roll
- Plaster Of Paris POP Bandage
- Disposable Hospital Patient Adult PVC ID Identification Bands
- Surgical Carbon Steel Blade
- Disposable SMS Surgical Gown
- Reusable Stainless Steel Veterinary injection Needle
- Surgical Silk Tape
- Disposable Medical Skin/White High Elastic Bandage
- Portable Dental LED CURING LIGHT
- Disposable Single Use Bone Marrow Trucut Biopsy Needle
- Disposable Reusable Ambu Bag Adultes Silicone Manual Resuscitator Oxygen
- AED 7000 Automated External Defibrillator Monitor Medical Desfibrilador Monitor Portatil
- Portable High Accuracy Oxygen O2 Gas Analyser
- Continuous Blood Glucose Monitoring System Devices
- Medical Disposable Infusion Pump Portable
- Shandong Qingdao Baby Plastic Oral Dispenser Dosing Syringe
- Human 32 Dental Tooth Model Medical Teaching/Dental Anatomy Model
- BD Blood Collection Additive Tubes EDTA K2/K3 EDTA Accucheck Active Tube
- Medical Paramedic Surgical Bandage Scissor
- Low Pressure Coiled CT Connecting Tube Y Shape Connector, Angiography MRI Injection Spiral Patient Extension Tubing
- Automatic Blood Lancing Device Bloodet Pen Lancet Pen
Our products
Product category: Disposable articles for hospitals
Transport Specimen Swab
Place of Origin:Shandong, China (Mainland)
Brand Name:Hiprove
Model Number:KA057
Certificate:CE/ISO13485
Material:PE tube+ wooden or PE stick with cotton
Size:12x160mm
Application:transport the specimen
Name:Female swab
Sterile:EO Gas Sterile
Colour:blueswab tip
material:absorbent cotton
package:Individual or bulk pack availableS
tick Material:plastic or wooden
Brand Name:Hiprove
Model Number:KA057
Certificate:CE/ISO13485
Material:PE tube+ wooden or PE stick with cotton
Size:12x160mm
Application:transport the specimen
Name:Female swab
Sterile:EO Gas Sterile
Colour:blueswab tip
material:absorbent cotton
package:Individual or bulk pack availableS
tick Material:plastic or wooden
Product category: Disposable articles for hospitals
Specimen Collection Nylon Flocked Swabs
Place of Origin:Shandong, China (Mainland)
Brand Name:OEM
Model Number:Swab
Properties:Gynecologial Examination
Type:Diagnostic
Instrument classification:Class II
Application:Cervical, Nasopharyngeal, Oropharyngeal
Materials:Nylon floss
Color:White
Certificate:CE, ISO, FDA
Brand Name:OEM
Model Number:Swab
Properties:Gynecologial Examination
Type:Diagnostic
Instrument classification:Class II
Application:Cervical, Nasopharyngeal, Oropharyngeal
Materials:Nylon floss
Color:White
Certificate:CE, ISO, FDA
Product category: Disposable articles for hospitals
Laboratory PipetteTips with Filter
Classification:Pipette
Brand Name:Hiprove
Model Number:YU-Y01
Place of Origin:Shandong, China (Mainland)
Certificate:CE,ISO
size:1000ul
Colour:bule
Material:high transparency
PPType:Gilson, Eppendorf, Thermo-Fisher, Finn
Application:Liquid Handling
with filter or not:with filter
Adapted to various pipettes:Gilson, Eppendorf, Thermo-Fisher
Brand Name:Hiprove
Model Number:YU-Y01
Place of Origin:Shandong, China (Mainland)
Certificate:CE,ISO
size:1000ul
Colour:bule
Material:high transparency
PPType:Gilson, Eppendorf, Thermo-Fisher, Finn
Application:Liquid Handling
with filter or not:with filter
Adapted to various pipettes:Gilson, Eppendorf, Thermo-Fisher
Product category: Disposable articles for hospitals
Laboratory PS/PP Test Tube
Classification:Test Tube
Brand Name:Hiprove
Model Number:YU-002
Place of Origin:Shandong, China (Mainland)
Certificate:CE,ISO
Material:superior PP/PS
colour:transparency/translucencesize:12*75mm/13*75mm/12*100mm/13*100mm/16*102mm
Usage:With the liquid
with cap or not:can do it
Package:tray package
Brand Name:Hiprove
Model Number:YU-002
Place of Origin:Shandong, China (Mainland)
Certificate:CE,ISO
Material:superior PP/PS
colour:transparency/translucencesize:12*75mm/13*75mm/12*100mm/13*100mm/16*102mm
Usage:With the liquid
with cap or not:can do it
Package:tray package
Product category: Disposable articles for hospitals
Medical Nasal Oxygen Cannula For Surgical
Description:
The nasal cannula are used for patients needing only low-flow supplemental oxygen. Patients with breathing difficulties and conditions such as emphysema or other pulmonary pathologies require the nasal cannula. The flow rate for the cannula is around .5 to 4 liters per minute (LPM).
All materials used in construction of the Oxygen Mask ,and the Oxygen Tubing are latex free, soft and smooth surface without sharp edge and object, They have no undesirable effects on the Oxygen/Medication passing through under ordinary conditions of use. Mask Material are hypoallergenic and shall resist ignition and rapid buring.
Size :S/M/L/XL
Material: Non-toxic Medical Grade PVC
Color: Green/Transparent
Single-use or Reusable: Single-use
Sterilization: EO
Packing: PE pack
The nasal cannula are used for patients needing only low-flow supplemental oxygen. Patients with breathing difficulties and conditions such as emphysema or other pulmonary pathologies require the nasal cannula. The flow rate for the cannula is around .5 to 4 liters per minute (LPM).
All materials used in construction of the Oxygen Mask ,and the Oxygen Tubing are latex free, soft and smooth surface without sharp edge and object, They have no undesirable effects on the Oxygen/Medication passing through under ordinary conditions of use. Mask Material are hypoallergenic and shall resist ignition and rapid buring.
Size :S/M/L/XL
Material: Non-toxic Medical Grade PVC
Color: Green/Transparent
Single-use or Reusable: Single-use
Sterilization: EO
Packing: PE pack
Product category: Disposable articles for hospitals
Pen Type Blood Collection Needle
Description:
Used to collect blood for testing, usually used together with vacuum tube.
It provide fast and convenient blood multiple sampling by single puncture.
High quality ultra-sharp needle assure atraumatic insertion and painless penetration.
Color-coded cap and hub assure accurate and convenient gauge size indentification.
Safety sleeve for this model is available to protect sampling person from accidental hurt or cross-infection.
Size:20G,21G,22G,23G,25G
Used to collect blood for testing, usually used together with vacuum tube.
It provide fast and convenient blood multiple sampling by single puncture.
High quality ultra-sharp needle assure atraumatic insertion and painless penetration.
Color-coded cap and hub assure accurate and convenient gauge size indentification.
Safety sleeve for this model is available to protect sampling person from accidental hurt or cross-infection.
Size:20G,21G,22G,23G,25G
Product category: Disposable articles for hospitals
Elastic Cold Bandage
Use direction:
A non-slip bandage for sprains, swellings and bruises. The requlred length of the bandage can be cut off with a pair of scissors. When applying the bandage, do not put too much pressure on it. Two or three tums are usually sufficient. Store remaining bandage in jar to keep fresh. If possible, store upright. Dermatologically tested.
Contains:
Bandage Composition:
Cotton, nylon, polyurethane
Cooling Ingredients:
Distilled water. medical alcohol, mint and mixed Bomeol
Cautions:
For external use only. Not suitable for children under 12 years old. If the product touches the eyes, rinse thoroughly with clean water. Do not use it during pregnancy or breast feeding. If irritation persists, seek medical advice. Do not use it after the expiry date.
A non-slip bandage for sprains, swellings and bruises. The requlred length of the bandage can be cut off with a pair of scissors. When applying the bandage, do not put too much pressure on it. Two or three tums are usually sufficient. Store remaining bandage in jar to keep fresh. If possible, store upright. Dermatologically tested.
Contains:
Bandage Composition:
Cotton, nylon, polyurethane
Cooling Ingredients:
Distilled water. medical alcohol, mint and mixed Bomeol
Cautions:
For external use only. Not suitable for children under 12 years old. If the product touches the eyes, rinse thoroughly with clean water. Do not use it during pregnancy or breast feeding. If irritation persists, seek medical advice. Do not use it after the expiry date.
Product category: Disposable articles for hospitals
First Aid Combat Tourniquet Military
Color: Black, orange
Loading port: Qingdao or Shanghai port or up to customer
Delivery time: 1~3 weeks and up to customer's quantity
Certificate: CE/ISO/FDA
Payment terms: T/T, L/C, Western Union, Paypal
Description: People can realize a one-handed implementation of the hemostasis operation. It is able to regulate the pressure needed, stop bleeding fast, improve the efficiency of hemostasis greatly.
Loading port: Qingdao or Shanghai port or up to customer
Delivery time: 1~3 weeks and up to customer's quantity
Certificate: CE/ISO/FDA
Payment terms: T/T, L/C, Western Union, Paypal
Description: People can realize a one-handed implementation of the hemostasis operation. It is able to regulate the pressure needed, stop bleeding fast, improve the efficiency of hemostasis greatly.
Product category: Disposable articles for hospitals
5L Medical Biohazard Safety Cardboard Box Sharp Container
Quick Details:
- Size: 5L
- Material: Cardboard
- Color: Yellow, White or Customized
- OEM: Avilable
- Packaging: 100pcs/ctn, 58*28*50cm, 16kgs
- Sharps safety boxes (usually made in cardboard) are used to dispose of needles and syringes typically during immunization campaings.
- Disposing biohazardous sharps materials must be disposed and packaged, e.g. medical needles,syringe barrels(with or
without needles), pasteur pipettes and glassware contaminated with infectious agents.
Product category: Disposable articles for hospitals
Electric Hot Water Bag Rechargeable
Quick Details:
- Product name: Electric Hot Water Bag Rechargeable
- Capacity: 900ml
- Color: Customized
- Shape: Pillow or Cartoon
- Size: 26*19cm
- Frequence: 50-60HZ
- Power: 500-600W
- Packaging: 100pcs/carton, 50*42*35cm, 25kgs
- This warmer is a new-style hot water bottle which is made of special material, It can keep warm and make you feel very
soft,comfortable and convenient. - The warmer is one of the new healthy and keeping warm product.It can ease pains such as arthritic, toothache,
arthritis,headache, back and neck pain, chilblain. - It has big difference from normal warmer,It takes 8-10 minutes charged the warmer and it can keep warm for 2-8 hours.
Product category: Disposable articles for hospitals
Central Venous Catheter CVC Kit
Features:
Ultra soft tip and catheter made by polyurethane provide good biocompatibility and lower risk of vascular trauma
Soft catheter hub ensures patient comfortable
Movable clamp makes puncturing safer
Radiopacity makes locating more easily after placement
Scale markings on catheter and guidewire assist in accurate placement
Available with CE, ISO certificates.
Standard Kit:
Central Venous Catheter
Steel Guidewire
Dilator
Clamps
Y-Type Introducer Needle and 5ml Syringe*
Injection Needle
Injection Caps
Ultra soft tip and catheter made by polyurethane provide good biocompatibility and lower risk of vascular trauma
Soft catheter hub ensures patient comfortable
Movable clamp makes puncturing safer
Radiopacity makes locating more easily after placement
Scale markings on catheter and guidewire assist in accurate placement
Available with CE, ISO certificates.
Standard Kit:
Central Venous Catheter
Steel Guidewire
Dilator
Clamps
Y-Type Introducer Needle and 5ml Syringe*
Injection Needle
Injection Caps
Product category: Laboratory equipment
Small Size Low Speed low price of lab Centrifuge Machine 80-1
Centrifugal separation technology is a new technology developed according to the state of particles in a practical centrifuge. Particles of different densities, sizes, and shapes settle in centrifugation at different speeds, so a roughly spherical, heterogeneous mixture can be separated by centrifugation. The centrifuge is to separate a large number of substances without studying biochemistry. For example, collect cells, separate plasma, separate DNA and proteins from these purified formulations, and isolate viruses and large - scale e. coli.
B Main technical parameters:
1: use the power supply. Ac 220 v50hz
2: motor power. 25 w
3: turn speed. 500-4000 revolutions per minute
4: centrifugal capacity. 20 ml x 6
5: timing range. 1-60 min or normally open
6: RCF. 1790 xg
C: use safety instructions
Remember to follow the following safety precautions when using this product：
1．Read all instructions。
2．The electrical rated parameters of the socket provided by the user shall not be less than the electrical rated parameters of the machine and have good grounding measures。
3．When replacing the fuse, pull the power plug out of the socket。
4．After the instrument breaks down, it should be repaired by professionals. The use of accessories not recommended by the manufacturer will cause certain quality problems。
5． When the rotor of the centrifuge is running, it is strictly forbidden to open the cover, and the rotor must be stopped completely. To open the cover to remove the centrifugal
tube。
6． The instrument is strictly prohibited to move during operation。
7． All kinds of liquid or other sundries are strictly forbidden to enter the working room of the centrifuge, otherwise the main engine will be damaged。
8． Instruments in use, should be looked after。
9. The power should be cut off before cleaning the machine。
10. The instrument should be used in a dry environment to avoid accidents caused by damp。
D: instructions
1． The instrument should be placed on a stable work table, the environment should be clean and tidy, temperature, humidity and good ventilation。
2． Set the speed adjustment knob to the minimum position before using the instrument。
The centrifugal tubes which need to be separated are inserted into the centrifugal tubes respectively. In order to make the instrument work smoothly. Avoid large vibrations. The material added to each centrifuge tube must be basically equal. And inserted symmetrically into the centrifugal tube. and then closed the cover plate.
4. Choose timing, the timing knob transferred to the "timing" or "ON" position.
5. Turn on the power supply and slowly adjust the speed control knob to the required speed。
6. Before the shutdown, the speed control knob must be placed in the minimum position to turn off the power switch and cut off the power supply
E：maintaining
1． Use the instrument correctly and pay attention to the maintenance of the instrument, make it in good working condition, can extend the service life of the instrument。
2. The instrument should be checked regularly three months during continuous operation：Check whether there is water drop, dirt, etc. falling into the motor and control assembly, check carbon brush, fuse, control assembly and fastening screw，After using for a period of time, if the speed of the centrifuge becomes slow, please check the carbon brush and replace it in time。(Replacement method: cut off the power, open the bottom plate, remove the circular plastic cap near the bottom of the motor, and replace the old carbon brush with the new one)
3. After long-term use of the instrument, natural wear is normal. If the machine is found to have abnormal noise, bearing wear of the motor, failure of electronic control components and other faults after one year of use, the company will continue to provide quality services and provide assistance
B Main technical parameters:
1: use the power supply. Ac 220 v50hz
2: motor power. 25 w
3: turn speed. 500-4000 revolutions per minute
4: centrifugal capacity. 20 ml x 6
5: timing range. 1-60 min or normally open
6: RCF. 1790 xg
C: use safety instructions
Remember to follow the following safety precautions when using this product：
1．Read all instructions。
2．The electrical rated parameters of the socket provided by the user shall not be less than the electrical rated parameters of the machine and have good grounding measures。
3．When replacing the fuse, pull the power plug out of the socket。
4．After the instrument breaks down, it should be repaired by professionals. The use of accessories not recommended by the manufacturer will cause certain quality problems。
5． When the rotor of the centrifuge is running, it is strictly forbidden to open the cover, and the rotor must be stopped completely. To open the cover to remove the centrifugal
tube。
6． The instrument is strictly prohibited to move during operation。
7． All kinds of liquid or other sundries are strictly forbidden to enter the working room of the centrifuge, otherwise the main engine will be damaged。
8． Instruments in use, should be looked after。
9. The power should be cut off before cleaning the machine。
10. The instrument should be used in a dry environment to avoid accidents caused by damp。
D: instructions
1． The instrument should be placed on a stable work table, the environment should be clean and tidy, temperature, humidity and good ventilation。
2． Set the speed adjustment knob to the minimum position before using the instrument。
The centrifugal tubes which need to be separated are inserted into the centrifugal tubes respectively. In order to make the instrument work smoothly. Avoid large vibrations. The material added to each centrifuge tube must be basically equal. And inserted symmetrically into the centrifugal tube. and then closed the cover plate.
4. Choose timing, the timing knob transferred to the "timing" or "ON" position.
5. Turn on the power supply and slowly adjust the speed control knob to the required speed。
6. Before the shutdown, the speed control knob must be placed in the minimum position to turn off the power switch and cut off the power supply
E：maintaining
1． Use the instrument correctly and pay attention to the maintenance of the instrument, make it in good working condition, can extend the service life of the instrument。
2. The instrument should be checked regularly three months during continuous operation：Check whether there is water drop, dirt, etc. falling into the motor and control assembly, check carbon brush, fuse, control assembly and fastening screw，After using for a period of time, if the speed of the centrifuge becomes slow, please check the carbon brush and replace it in time。(Replacement method: cut off the power, open the bottom plate, remove the circular plastic cap near the bottom of the motor, and replace the old carbon brush with the new one)
3. After long-term use of the instrument, natural wear is normal. If the machine is found to have abnormal noise, bearing wear of the motor, failure of electronic control components and other faults after one year of use, the company will continue to provide quality services and provide assistance
Product category: Disposable articles for hospitals
Blood Collection Needle Holder
Description
It’s usually used together with all types of vacuum blood collection tubes in the process of medical examination and available for pen type blood collection needles and butterfly blood collection needles.
Instruction for use:
1. Transparent plastic material is easy for doctors to observe blood collection status of vacuum tubes.
2. Double screwing juncture can fasten blood collection needle tightly.
It’s usually used together with all types of vacuum blood collection tubes in the process of medical examination and available for pen type blood collection needles and butterfly blood collection needles.
Instruction for use:
1. Transparent plastic material is easy for doctors to observe blood collection status of vacuum tubes.
2. Double screwing juncture can fasten blood collection needle tightly.
Product category: Laboratory equipment
Manufacture XSZ-107BN Biological Microscope
I. Application
XSZ-107BN of bio-microscope has modern frame and can fit 45°inclined monocular, binocular, trinocular head on it. Double layer mechanical stage with adjustable long handle and coaxial coarse/fine focus knob make the operation easily. It is also provided with high quality achromatic objectives, wide field eyepieces and LED lamp adjustable brightness, which guarantee the best image. It is widely used for examination, teaching demonstration, bacteioscopy and cytoscopy in colleges and university, medical and health establishments, research institutes and department of forestry and agriculture and so on.
II. Specification of Standard Accessories
1. Objectives
Category
Magnification
Numerical aperture
Working distance
Achromatic
4. Mechanical tube length: 160mm
5. Objective to primary image distance: 195mm
6. Stage size: 140mm X 132mm, moving range: 75 X 45mm
7. ABBE condenser, N.A. =1.25 with iris diaphragm
8. Coarse/fine focal range: 20mm
9. Illumination: 3W LED with adjustable brightness
10. Net weight: 6 kg
11. Measurement (including viewing head): 262mm(L) X 204mm(W) X 389mm(H)
III. Structure (showed as diagram)
XSZ-107 microscope is composed of nine main component parts:
1. Stand: It’s the base bearing total weight of microscope, which built in illumination system, electronic parts and connecting control.
2. Rise and fall support: It connects with stage, arm and condenser. Stage and condenser can move vertically through it for proper operation.
3. Arm: It’s the central part connecting the frame and every main component part. It’s provided with coaxial coarse/fine focus system, with tension adjustable knob and limited stopper. It guarantees the stage rise and down smoothly.
4. Viewing head: It can fit on 45°inclined monocular, binocular, or trinocular head.
5. Eyepieces: Using WF10X or WF16X (optional) wide field eyepiece.
6. Nosepiece: It guarantees comfortable and precise rotation by quadruple revolving nosepiece.
7. Objective: 4X, 10X, 40(S) and 100X(S, Oil) high-quality achromatic objectives make the imaging clearly.
8. Stage: Using double layer mechanical stage, it can be operated much easily by coaxial knob in low position.
9. Condenser: ABBE condenser N.A =1.25 with iris diaphragm.
IV. Operation Instruction
1. Insert the eyepieces into the eyepiece tube, and screw objectives into the nosepiece in sequence of different magnification from low to high. Then put the specimen on the stage and secure it in the position with tablet and move it to the center of stage.
2. Turn on the power switch and adjust the brightness from dark to bright slowly. After working, you must adjust the brightness to a little dark before you tune it off.
3. Observe the specimen from lower magnification objective firstly and move the specimen to the center of view field, then rotate higher magnification objective. You may use the fine focusing knob to obtain the clear image. When 100X (S, Oil) objective is used , you should fill up with cedar wood oil (without bubble ) between the front of objective and the specimen surface. After working, it should be wiped with a few xylene immediately.
4. In order to obtain bright and clear image, the illumination must be adjusted .When different objective is chosen, you should adjust the iris diaphragm of the condenser and different brightness of the light.
5. When the lamp needs to replace, you should shut off the power switch and replace it after the lamp is cool. NOTE: The contact must be firmed, and the filament center should be adjusted.
V. Maintenance
1. Exam the connection of every component parts is firm when opening the package and installing the microscope. Be careful, not overexert to break the instrument.
2. Operate correctly, and put the dust cover on the microscope after work to prevent from the dust and oil strain.
3. Don’t dismantle the instrument rashly besides the replaceable lest the correct position should be breached.
4. Keep the instrument in dry and cool place and away from the pollution and corrosion.
5. Please send the instrument to the special repair shop if it goes out of order.
6. When the objectives and eyepieces won’t be used for a long time, please place them into a dry box , and put the dust cover onto the microscope.
VI. Standard Outfit of XSZ-107BN Biological Microscope
Objective
4X, 10X, 40(S), 100X(S, Oil)
●
Eyepiece
WF10X
●
WF16X
optional
Viewing Head
Sliding Binocular Head
●
Sliding Trinocular Head
optional
Nosepiece
Quadruple
●
Stage
Double Layer Mechanical Stage
●
Illumination
3WLED or 6V / 20W Halogen Lamp
●
Condenser
Abbe Condenser N.A=1.25
●
VII. Full Set of the Instrument
1. Mainframe of bio-microscope of XSZ-107BN 1 PC
2. Viewing head 1 PC
3. Objectives: 4X, 10X, 40X(S), 100X(S,O) 1 PC of each
4. Eyepiece WF 10X 1 PAIR
5. 3W LED or 6V/20W halogen lamp 1 PC
6. Fuse BGX1-20 (1.0 A) 1 PC
7. Green filter 1 PC
8. Ceda wood oil 1 BOTTLE
9. Operational manual 1 COPY
10. Power cable 1 PC
11. Dust cover 1 PC
12. Desiccant 1 PACKET
● 13. Eyepiece WF 16X OPTIONAL
● 14. Plain-concave mirror OPTIONAL
● 15. Yellow & blue filter OPTIONAL
● 16. Wooden box OPTIONAL
XSZ-107BN of bio-microscope has modern frame and can fit 45°inclined monocular, binocular, trinocular head on it. Double layer mechanical stage with adjustable long handle and coaxial coarse/fine focus knob make the operation easily. It is also provided with high quality achromatic objectives, wide field eyepieces and LED lamp adjustable brightness, which guarantee the best image. It is widely used for examination, teaching demonstration, bacteioscopy and cytoscopy in colleges and university, medical and health establishments, research institutes and department of forestry and agriculture and so on.
II. Specification of Standard Accessories
1. Objectives
Category
Magnification
Numerical aperture
Working distance
Achromatic
4. Mechanical tube length: 160mm
5. Objective to primary image distance: 195mm
6. Stage size: 140mm X 132mm, moving range: 75 X 45mm
7. ABBE condenser, N.A. =1.25 with iris diaphragm
8. Coarse/fine focal range: 20mm
9. Illumination: 3W LED with adjustable brightness
10. Net weight: 6 kg
11. Measurement (including viewing head): 262mm(L) X 204mm(W) X 389mm(H)
III. Structure (showed as diagram)
XSZ-107 microscope is composed of nine main component parts:
1. Stand: It’s the base bearing total weight of microscope, which built in illumination system, electronic parts and connecting control.
2. Rise and fall support: It connects with stage, arm and condenser. Stage and condenser can move vertically through it for proper operation.
3. Arm: It’s the central part connecting the frame and every main component part. It’s provided with coaxial coarse/fine focus system, with tension adjustable knob and limited stopper. It guarantees the stage rise and down smoothly.
4. Viewing head: It can fit on 45°inclined monocular, binocular, or trinocular head.
5. Eyepieces: Using WF10X or WF16X (optional) wide field eyepiece.
6. Nosepiece: It guarantees comfortable and precise rotation by quadruple revolving nosepiece.
7. Objective: 4X, 10X, 40(S) and 100X(S, Oil) high-quality achromatic objectives make the imaging clearly.
8. Stage: Using double layer mechanical stage, it can be operated much easily by coaxial knob in low position.
9. Condenser: ABBE condenser N.A =1.25 with iris diaphragm.
IV. Operation Instruction
1. Insert the eyepieces into the eyepiece tube, and screw objectives into the nosepiece in sequence of different magnification from low to high. Then put the specimen on the stage and secure it in the position with tablet and move it to the center of stage.
2. Turn on the power switch and adjust the brightness from dark to bright slowly. After working, you must adjust the brightness to a little dark before you tune it off.
3. Observe the specimen from lower magnification objective firstly and move the specimen to the center of view field, then rotate higher magnification objective. You may use the fine focusing knob to obtain the clear image. When 100X (S, Oil) objective is used , you should fill up with cedar wood oil (without bubble ) between the front of objective and the specimen surface. After working, it should be wiped with a few xylene immediately.
4. In order to obtain bright and clear image, the illumination must be adjusted .When different objective is chosen, you should adjust the iris diaphragm of the condenser and different brightness of the light.
5. When the lamp needs to replace, you should shut off the power switch and replace it after the lamp is cool. NOTE: The contact must be firmed, and the filament center should be adjusted.
V. Maintenance
1. Exam the connection of every component parts is firm when opening the package and installing the microscope. Be careful, not overexert to break the instrument.
2. Operate correctly, and put the dust cover on the microscope after work to prevent from the dust and oil strain.
3. Don’t dismantle the instrument rashly besides the replaceable lest the correct position should be breached.
4. Keep the instrument in dry and cool place and away from the pollution and corrosion.
5. Please send the instrument to the special repair shop if it goes out of order.
6. When the objectives and eyepieces won’t be used for a long time, please place them into a dry box , and put the dust cover onto the microscope.
VI. Standard Outfit of XSZ-107BN Biological Microscope
Objective
4X, 10X, 40(S), 100X(S, Oil)
●
Eyepiece
WF10X
●
WF16X
optional
Viewing Head
Sliding Binocular Head
●
Sliding Trinocular Head
optional
Nosepiece
Quadruple
●
Stage
Double Layer Mechanical Stage
●
Illumination
3WLED or 6V / 20W Halogen Lamp
●
Condenser
Abbe Condenser N.A=1.25
●
VII. Full Set of the Instrument
1. Mainframe of bio-microscope of XSZ-107BN 1 PC
2. Viewing head 1 PC
3. Objectives: 4X, 10X, 40X(S), 100X(S,O) 1 PC of each
4. Eyepiece WF 10X 1 PAIR
5. 3W LED or 6V/20W halogen lamp 1 PC
6. Fuse BGX1-20 (1.0 A) 1 PC
7. Green filter 1 PC
8. Ceda wood oil 1 BOTTLE
9. Operational manual 1 COPY
10. Power cable 1 PC
11. Dust cover 1 PC
12. Desiccant 1 PACKET
● 13. Eyepiece WF 16X OPTIONAL
● 14. Plain-concave mirror OPTIONAL
● 15. Yellow & blue filter OPTIONAL
● 16. Wooden box OPTIONAL
Product category: Laboratory equipment
XSZ-107BN Digital Biological Microscope
Optical system
Achromatic optical system
View tube
Trinocular, Hinge trinocular, 30 ° Tilt, 360°rotating IPD adjustment: 55mm ~ 75mm, Diopter adjustment: ± 5 diopters
Eyepiece
WF PL10 × (Φ20mm)/PL16× (Φ15mm)
Objective
Flat field achromatic objective: 4X 10X 40X(spring) 100X/(spring, oil)
Nosepiece
Four-hole converter
Stage
Double layer mechanical stage. Stage size:140× 132mm., moving range: 70mm ×50mm
Focusing mechanism
Tightness and height limitation of coarse regulation are adjustable. Coarse regulation range: 22mm Fine adjustment accuracy :0.002mm.
Llight source
3W LED, the brightness is adjustable
Condensor
N.A.1.25, adjustable center, with field stop and aperture stop
1.Digital photoelectric imaging and optical system the integration of seamless connection.
2.CCD/CMOS camera really built-in,accurate positioning;
3.Original photoelectric imaging spectral structure,no need push rod,to ensure that any magnification can get
full uniform illumination;
4.Need to adjust the coarse micro,ensure the binoculars under observation and computer display completely
in sync;
5.Excellent image quality,the image sharpness colorless difference,clear image is flat and level.
Achromatic optical system
View tube
Trinocular, Hinge trinocular, 30 ° Tilt, 360°rotating IPD adjustment: 55mm ~ 75mm, Diopter adjustment: ± 5 diopters
Eyepiece
WF PL10 × (Φ20mm)/PL16× (Φ15mm)
Objective
Flat field achromatic objective: 4X 10X 40X(spring) 100X/(spring, oil)
Nosepiece
Four-hole converter
Stage
Double layer mechanical stage. Stage size:140× 132mm., moving range: 70mm ×50mm
Focusing mechanism
Tightness and height limitation of coarse regulation are adjustable. Coarse regulation range: 22mm Fine adjustment accuracy :0.002mm.
Llight source
3W LED, the brightness is adjustable
Condensor
N.A.1.25, adjustable center, with field stop and aperture stop
1.Digital photoelectric imaging and optical system the integration of seamless connection.
2.CCD/CMOS camera really built-in,accurate positioning;
3.Original photoelectric imaging spectral structure,no need push rod,to ensure that any magnification can get
full uniform illumination;
4.Need to adjust the coarse micro,ensure the binoculars under observation and computer display completely
in sync;
5.Excellent image quality,the image sharpness colorless difference,clear image is flat and level.
Product category: Disposable articles for hospitals
Disposable Sterile Twist Blood Lancet
Description:
Twist blood lancet is featuring the hightest quality needle, a tri-bevel tip dramatically reduces trauma when skin is punctured. These lancets also offer universal style compatible with almost all lancing devices.
Compatibility: Suitable for almost all lancing device
Sterilization:Sterilized by Gamma-Ray
Instructions:
Do not use lancet if protective cap has been previously removed.Do not store lancet in lancing device.
Twist blood lancet is featuring the hightest quality needle, a tri-bevel tip dramatically reduces trauma when skin is punctured. These lancets also offer universal style compatible with almost all lancing devices.
Compatibility: Suitable for almost all lancing device
Sterilization:Sterilized by Gamma-Ray
Instructions:
Do not use lancet if protective cap has been previously removed.Do not store lancet in lancing device.
Product category: Disposable articles for hospitals
High Quality Cheap 2.0ml DNA / RNA Mini Spin Columns
Description:
Spin Column contains lots of glass fiber membrane filter, based on skills of rapid extraction of nucleic acid by glass optical fiber. It can be used to purify single-stranded or double strand DNA/RNA in salt, solvent, enzyme, protein, etc. Nucleic acid is absorbed on the glass fiber at high salt concentration while salt and impurities are removed during the cleaning process. Pure DNA/RNA is obtained from the membranes by water or TE buffer.
Characters:
Spin Column contains lots of glass fiber membrane filter, based on skills of rapid extraction of nucleic acid by glass optical fiber. It can be used to purify single-stranded or double strand DNA/RNA in salt, solvent, enzyme, protein, etc. Nucleic acid is absorbed on the glass fiber at high salt concentration while salt and impurities are removed during the cleaning process. Pure DNA/RNA is obtained from the membranes by water or TE buffer.
Characters:
- DNA / RNA mini spin column
- Can compatible with Qiagen and Invitrogen buffer solution
- Binding ability 45～50µg
- Fragment size 65bp～10kbp
- Buffer solution formula is suitable for plasmid sample volume preparation, gel extraction and PCR removal
- Rapid purify of PCR products
- Recover DNA strand from agarose gel
- Extract Plasmid DNA
- Extract genome DNA
- Purify RNA
- Certain DNA separation from reaction mixture
Product category: Disposable articles for hospitals
Carbon Fiber Scoop Stretcher
Features
1.There is an new clutch at each ends, which could separate the stretcher into left or right parts.
2.It is separately-type stretcher of transfer fractured and serious patient..
3.Telescopic pole also adopt oval-sharp design and add the tube's thickness to make it so steady, it's length can be adjusted according to patient's body.
4.It can strength patient at origin place which can reduce the further hurt to the patient.
Description:
The scoop stretcher (or clamshell, Roberson orthopedic stretcher, or just scoop) is a device used specifically for moving injured people. It is most frequently used to lift people who may have a spinal cord injury from the ground, either due to unconsciousness or in order to maintain stability in the case of trauma.
Material: Carbon fiber/ PE/ aluminum
Open Size: 204*42*7cm
Folding size: 167*42*7cm
Load Bearing: 250/ 160kg
Color: Black/ Yellow/ Sliver / Customized
Packing size: 170*45*8cm
G.W: 4/ 11/ 8.25kg
1.There is an new clutch at each ends, which could separate the stretcher into left or right parts.
2.It is separately-type stretcher of transfer fractured and serious patient..
3.Telescopic pole also adopt oval-sharp design and add the tube's thickness to make it so steady, it's length can be adjusted according to patient's body.
4.It can strength patient at origin place which can reduce the further hurt to the patient.
Description:
The scoop stretcher (or clamshell, Roberson orthopedic stretcher, or just scoop) is a device used specifically for moving injured people. It is most frequently used to lift people who may have a spinal cord injury from the ground, either due to unconsciousness or in order to maintain stability in the case of trauma.
Material: Carbon fiber/ PE/ aluminum
Open Size: 204*42*7cm
Folding size: 167*42*7cm
Load Bearing: 250/ 160kg
Color: Black/ Yellow/ Sliver / Customized
Packing size: 170*45*8cm
G.W: 4/ 11/ 8.25kg
Product category: Disposable articles for hospitals
Medical Digital Thermometer
Description:
This digital thermometer provides a quick and highly accurate reading of an individual's body temperature. The digital thermometer is intended to measure the human body's temperature in regular mode orally, rectally or under the arm. And the device is reusable for clinical or home use on people of all ages.
Measuring Range: 32.0℃-42.0℃/90.0°F -107.6°F
Material: ABS, Silica gel, PCB, Sensor
Color: White, Blue, Red, ect.
Response: 60 seconds
Application: Oral, Rectal, Armpit
Accuracy: ±0.1℃
Memory: Last measuring reading
This digital thermometer provides a quick and highly accurate reading of an individual's body temperature. The digital thermometer is intended to measure the human body's temperature in regular mode orally, rectally or under the arm. And the device is reusable for clinical or home use on people of all ages.
Measuring Range: 32.0℃-42.0℃/90.0°F -107.6°F
Material: ABS, Silica gel, PCB, Sensor
Color: White, Blue, Red, ect.
Response: 60 seconds
Application: Oral, Rectal, Armpit
Accuracy: ±0.1℃
Memory: Last measuring reading
Product category: Laboratory equipment
Laboratory TD4A-WS Desktop Low Speed Centrifuge with 12 holes
Summary:
Centrifugal separation technology is based on particle in a practical centrifugal occasions and developed to the state of the new technology. Different density, size or shape particles in different occasions centrifugal sedimentation, so a roughly spherical is not uniform mixture, can use the method of centrifugal are isolated, centrifuge is to further research on biological chemistry, separate a lot of material. For example collect cells, separating the plasma, from these the purification of separation in preparations DNA and protein molecules, and can be isolated the virus and massive escherichia coli, strict cell components, such as the ribonucleoprotein complex particle.yf
The machine adopts brushless motor, the microcomputer control, with RCF automatic computing and setting. With a variety of program protection, easy operation etc.
Safety control: the lid lock system in the operation;
In the unbalanced rotating automatic braking system;
Automatic door opened the switch at the end of the operation
Main technical parameters:
1. Use power supply: ac 220 V ± 10 V frequency 50 HZ
2. The whole machine power: 250 W
3. Turn speed: 0-4000 RPM ± 50 turn/points digital display
4. Centrifugal capacity: 8by 15 ml (4000 RPM)
5: relative centrifugal force: 1880 xg
6: envelop dimensions:23 x 290 x 270 (mm)
7: set when: 1-99 minutes digital display
8: heavy quantity: 10 kg
9: more than 65 db noise maximum speed
Three use safety guidelines
1. Use this product to remember that comply with the following safety precautions, read all instructions.
2. Users of the electrical outlet of rated parameters should be not less than the electrical machine is rated parameters and good grounding measures.
3. Replacing the fuse, should will plug from the socket drew.
4. Instruments after failure, there should be a professional repair, use manufacturers not recommended accessories can cause certain quality problems.
5. Have a children's environment use, should close attention.
6. From the heart in operation, it is strictly prohibited to play boot lid, must wait for rotor completely stop turning. To play out on centrifugal cover of the tube.
7. Instruments in use process move is strictly prohibited.
8. It is strictly prohibited to all kinds of liquid or other material into the centrifuge indoor job, otherwise, it will damage the apparatus.
9. The instrument in use, must be supervised.
10. Scrub machine, should first pulled out the power supply.
11. The instrument shell should be properly grounded, lest the moisture influence the accidents.
Method of use:
1. Will join to the centrifugal separation material tube inserted into the machine for respectively the centrifugal tube, in order to make instruments work stable performance is good, avoid to produce larger vibration, each centrifugal tube material must be added basic equal, symmetrical insert the machine for centrifugal tube, close the cover plate.
2. The switch on the power, turn on the power switch (instrument back).
3. With keys to choose a good speed and need to work time.
4. Then press the start button, this time the centrifuge, it started to work. When you get to the set of working time will be issued a warning sound.
Maintenance
1. The right to use and pay attention to the maintenance of the equipment, make its are in good condition, can prolong the service life of the instrument.
2. Instruments in continuous working period, should be three months should be a regular inspection: check if there is water, dirt and fall into the motor and control component inside, check the fuse, control component and tighten the screws.
3. The instrument for long-term use, natural wear is a normal phenomenon, the instrument in the use of a year later, if discover the motors have not normal noise, motor bearing wear, electronic component failure failure, the enterprise will continue to provide high quality service, assist processing.
Centrifugal separation technology is based on particle in a practical centrifugal occasions and developed to the state of the new technology. Different density, size or shape particles in different occasions centrifugal sedimentation, so a roughly spherical is not uniform mixture, can use the method of centrifugal are isolated, centrifuge is to further research on biological chemistry, separate a lot of material. For example collect cells, separating the plasma, from these the purification of separation in preparations DNA and protein molecules, and can be isolated the virus and massive escherichia coli, strict cell components, such as the ribonucleoprotein complex particle.yf
The machine adopts brushless motor, the microcomputer control, with RCF automatic computing and setting. With a variety of program protection, easy operation etc.
Safety control: the lid lock system in the operation;
In the unbalanced rotating automatic braking system;
Automatic door opened the switch at the end of the operation
Main technical parameters:
1. Use power supply: ac 220 V ± 10 V frequency 50 HZ
2. The whole machine power: 250 W
3. Turn speed: 0-4000 RPM ± 50 turn/points digital display
4. Centrifugal capacity: 8by 15 ml (4000 RPM)
5: relative centrifugal force: 1880 xg
6: envelop dimensions:23 x 290 x 270 (mm)
7: set when: 1-99 minutes digital display
8: heavy quantity: 10 kg
9: more than 65 db noise maximum speed
Three use safety guidelines
1. Use this product to remember that comply with the following safety precautions, read all instructions.
2. Users of the electrical outlet of rated parameters should be not less than the electrical machine is rated parameters and good grounding measures.
3. Replacing the fuse, should will plug from the socket drew.
4. Instruments after failure, there should be a professional repair, use manufacturers not recommended accessories can cause certain quality problems.
5. Have a children's environment use, should close attention.
6. From the heart in operation, it is strictly prohibited to play boot lid, must wait for rotor completely stop turning. To play out on centrifugal cover of the tube.
7. Instruments in use process move is strictly prohibited.
8. It is strictly prohibited to all kinds of liquid or other material into the centrifuge indoor job, otherwise, it will damage the apparatus.
9. The instrument in use, must be supervised.
10. Scrub machine, should first pulled out the power supply.
11. The instrument shell should be properly grounded, lest the moisture influence the accidents.
Method of use:
1. Will join to the centrifugal separation material tube inserted into the machine for respectively the centrifugal tube, in order to make instruments work stable performance is good, avoid to produce larger vibration, each centrifugal tube material must be added basic equal, symmetrical insert the machine for centrifugal tube, close the cover plate.
2. The switch on the power, turn on the power switch (instrument back).
3. With keys to choose a good speed and need to work time.
4. Then press the start button, this time the centrifuge, it started to work. When you get to the set of working time will be issued a warning sound.
Maintenance
1. The right to use and pay attention to the maintenance of the equipment, make its are in good condition, can prolong the service life of the instrument.
2. Instruments in continuous working period, should be three months should be a regular inspection: check if there is water, dirt and fall into the motor and control component inside, check the fuse, control component and tighten the screws.
3. The instrument for long-term use, natural wear is a normal phenomenon, the instrument in the use of a year later, if discover the motors have not normal noise, motor bearing wear, electronic component failure failure, the enterprise will continue to provide high quality service, assist processing.
Product category: Laboratory equipment
Plasma Gel maker and Bio filler maker
Operation Principle:
Filler maker making fillers after incubating plasmas by using heating system.Filler can make biofiller in two-step process. It proceeds cnrtrlledl heating and cooling by bio fllr maker.
Application:
Rio fllr equipment for acne scar, wrinkle removal PRP/PPP FILLER & PLASMA GEL Filler, Converts Platalet-Rich Plasma into a Bio Gel for Facial &Corporal Fillings.
Parameter setting:
Activate incubating and cooling process after setting the timer to 3minutes at 70c, 10minutes at 90c, and 5minutes at cooling system.
Temperature Range
0-90℃
Max capacity
10 Syringe
Timer
0-99min
Power supply
AC 220V/110V 50HZ/60HZ
Filler maker making fillers after incubating plasmas by using heating system.Filler can make biofiller in two-step process. It proceeds cnrtrlledl heating and cooling by bio fllr maker.
Application:
Rio fllr equipment for acne scar, wrinkle removal PRP/PPP FILLER & PLASMA GEL Filler, Converts Platalet-Rich Plasma into a Bio Gel for Facial &Corporal Fillings.
Parameter setting:
Activate incubating and cooling process after setting the timer to 3minutes at 70c, 10minutes at 90c, and 5minutes at cooling system.
Temperature Range
0-90℃
Max capacity
10 Syringe
Timer
0-99min
Power supply
AC 220V/110V 50HZ/60HZ
Product category: Disposable articles for hospitals
Portable NPWT Negative Pressure Wound Therapy Device Kit
Quick Details:
- Product name: NPWT Device
- Light weight: ~0.75Kg
- Portable: 146*135*77mm
- Quiet treatment: Less than 40dB
- Vacuum Range: -50~ -225 mmHg
- Treatment Modes: Continuous,and Dynamic
- Battery: 12-16 Hour,2.2Ah/11.1V
- Recharge Times: 3.5 Hour
- Canister: 140, 450ml
- Chronic disease management Appropriate exercise is beneficial for blood sugar and blood pressure control.
- Nutrition improvement In-hospital activities or Wound homeCare, improves the quality of life of patients and improves nutrient intake and absorption.
- Relieving anxiety, depression Enhances the confidence of patients to heal and shape a positive therapeutic attitude.
Product category: Laboratory equipment
Factory price Laboratory SH120 high Speed centrifuge machine medical technology centrifuge
SH-120 MICRO HEMATORIT CENTRIFUGE
Summary:
Trace blood centrifuge is applicable to measure precise blood cells than product value, can also be used to trace the blood and solution of the precipitation separation. Take HP tiny, (or earlobe blood) disposal capacity, take blood is convenient, centrifugal short time, the detection accuracy, high working efficiency, and complete equipments.
The main technical parameters:
1. The electricity source: ac 220 V ± 10 V frequency 50 HZ
2. The whole machine power: 100 W
3. Centrifugal speed: 1500 ~ 12000 RPM (adjustable)
4. The maximum relative centrifugal force: 15300 g
5. Centrifugal capacity: 24 root ￠1.5 mm x 75 mm (glass capillary)
6. Timing range: 0 ~ 60 min
7. Turntable form: ShuiPingShi
8. Start time: 1 min
9. Braking time: 2 min
Use safety guidelines
Use this product to remember that comply with the following safety precautions:
1. Read all instructions.
2. Users of the electrical outlet of rated parameters should be not less than the electrical machine is rated parameters and good grounding measures.
3. Replacing the fuse, should will plug from the socket drew.
4. Instruments after failure, there should be a professional repair, use manufacturers not recommended accessories can cause certain quality problems.
5. Have a children's environment use, should close attention.
6. From the heart in operation, it is strictly prohibited to play boot lid, must wait for rotor completely stop turning. To play out on centrifugal cover of the tube.
7. Instruments in use process move is strictly prohibited.
8. It is strictly prohibited to all kinds of liquid or other material into the centrifuge work indoor, can damage otherwise host.
9The instrument in use, must be supervised.
10. Scrub machine, should first pulled out the power supply.
11. The instrument shell should be properly grounded, lest the moisture influence the accidents.
Instructions
1. The instruments should be placed in the smooth on the environment should be clean and tidy, temperature. Humidity moderate ventilation.
2. Use instrument, before knob on the minimum speed position.
3. The first dozen boot lid, remove the blocks and aluminum cover for the unit is the glass capillary (already take blood samples) by centrifugal turntable 1-24 scale in the slot, respectively (each capillary blood samples for basic equal) cover with aluminum plate fixed blocks, and computer cover.
4. Choose timing, timing knob moves to a "timing" or "often a" position.
5 switch ON the power, the power switch as to "ON" position, indicator emit light. Slow speed adjustment knob, needed to speed. At this time to enter the work state centrifuge.
6 before downtime, must will speed in minimum knob position, turn off the power switch, cut off power supply.
Maintenance
1. The right to use and pay attention to the maintenance of the equipment, make its are in good condition, can prolong the service life of the instrument.
2. Instruments in continuous working period, should be three months should be a regular inspection: check if there is water, dirt and fall into the motor and control component inside, check the carbon brush. Fuse, control component and tighten the screws, check the carbon brush, such as the discovery of carbon brush badly worn, please change in time.
3. The instrument for long-term use, natural wear is a normal phenomenon, the instrument in the use of a year later, if discover the motors have not normal noise, motor bearing wear, electronic component failure failure, the enterprise will continue to provide high quality service, assist processing
Summary:
Trace blood centrifuge is applicable to measure precise blood cells than product value, can also be used to trace the blood and solution of the precipitation separation. Take HP tiny, (or earlobe blood) disposal capacity, take blood is convenient, centrifugal short time, the detection accuracy, high working efficiency, and complete equipments.
The main technical parameters:
1. The electricity source: ac 220 V ± 10 V frequency 50 HZ
2. The whole machine power: 100 W
3. Centrifugal speed: 1500 ~ 12000 RPM (adjustable)
4. The maximum relative centrifugal force: 15300 g
5. Centrifugal capacity: 24 root ￠1.5 mm x 75 mm (glass capillary)
6. Timing range: 0 ~ 60 min
7. Turntable form: ShuiPingShi
8. Start time: 1 min
9. Braking time: 2 min
Use safety guidelines
Use this product to remember that comply with the following safety precautions:
1. Read all instructions.
2. Users of the electrical outlet of rated parameters should be not less than the electrical machine is rated parameters and good grounding measures.
3. Replacing the fuse, should will plug from the socket drew.
4. Instruments after failure, there should be a professional repair, use manufacturers not recommended accessories can cause certain quality problems.
5. Have a children's environment use, should close attention.
6. From the heart in operation, it is strictly prohibited to play boot lid, must wait for rotor completely stop turning. To play out on centrifugal cover of the tube.
7. Instruments in use process move is strictly prohibited.
8. It is strictly prohibited to all kinds of liquid or other material into the centrifuge work indoor, can damage otherwise host.
9The instrument in use, must be supervised.
10. Scrub machine, should first pulled out the power supply.
11. The instrument shell should be properly grounded, lest the moisture influence the accidents.
Instructions
1. The instruments should be placed in the smooth on the environment should be clean and tidy, temperature. Humidity moderate ventilation.
2. Use instrument, before knob on the minimum speed position.
3. The first dozen boot lid, remove the blocks and aluminum cover for the unit is the glass capillary (already take blood samples) by centrifugal turntable 1-24 scale in the slot, respectively (each capillary blood samples for basic equal) cover with aluminum plate fixed blocks, and computer cover.
4. Choose timing, timing knob moves to a "timing" or "often a" position.
5 switch ON the power, the power switch as to "ON" position, indicator emit light. Slow speed adjustment knob, needed to speed. At this time to enter the work state centrifuge.
6 before downtime, must will speed in minimum knob position, turn off the power switch, cut off power supply.
Maintenance
1. The right to use and pay attention to the maintenance of the equipment, make its are in good condition, can prolong the service life of the instrument.
2. Instruments in continuous working period, should be three months should be a regular inspection: check if there is water, dirt and fall into the motor and control component inside, check the carbon brush. Fuse, control component and tighten the screws, check the carbon brush, such as the discovery of carbon brush badly worn, please change in time.
3. The instrument for long-term use, natural wear is a normal phenomenon, the instrument in the use of a year later, if discover the motors have not normal noise, motor bearing wear, electronic component failure failure, the enterprise will continue to provide high quality service, assist processing
Product category: Laboratory equipment
XC-A30 ESR Analyzer
Features:
1. Random access
2. up to 30 samples can be scanned simultaneously
3. Throughput: up to 60 samples/hour
4. Temperature compensation refer to 18℃ according to Westergren method
5. ESR curve display and print-out
6. Touch screen, large LCD display
7. Built-in internal thermal recorder
1. Random access
2. up to 30 samples can be scanned simultaneously
3. Throughput: up to 60 samples/hour
4. Temperature compensation refer to 18℃ according to Westergren method
5. ESR curve display and print-out
6. Touch screen, large LCD display
7. Built-in internal thermal recorder
Product category: Laboratory equipment
XI-921 electrolyte analyzer
Feature:
1. Compact, cost-efficient and easy-to-use
2. Excellent, precision and reliability
3. Long life, high performance, maintenance- free electrodes
4. Automatic sampling, washing and calibration
5. Touch screen, large LCD display
6. Internal thermal printer, supporting barcode reader
7. Auto sampler(optional) offering 26 positions(with 2 for emergency positions)
8. Barcode reader(ooptional) for positive identification of patient samples
1. Compact, cost-efficient and easy-to-use
2. Excellent, precision and reliability
3. Long life, high performance, maintenance- free electrodes
4. Automatic sampling, washing and calibration
5. Touch screen, large LCD display
6. Internal thermal printer, supporting barcode reader
7. Auto sampler(optional) offering 26 positions(with 2 for emergency positions)
8. Barcode reader(ooptional) for positive identification of patient samples
Product category: Laboratory equipment
Laboratory DM0408 Low speed centrifuge with A8-15P rotor standard
DM0408 Low speed centrifuge
Product Description:
·
• Speed range of 300-4000rpm.
• 3 programs storage capacity for routine applications.
• Automatic internal diagnosis.
• Maintenance free brushless DC motor.
Packaging & Shipping:
1set/ctn, ctn size:28.6*36.7*22.7cm,9.2kg
Our Services:
1.Can make the OEM.
2.Ship the goods to your designated place.
3.Other your request.(We have many cooperative express company,like:DHL, FedEx,UPS and so on.Every country we have cheap forwarder)
Company Information:
Our company is a professional supplier of medical/laboratory equipment and consumable.We´ll offer the products with high quality and best price.Any need,contact me freely.
FAQ:
1.Are you manufacturer?
Yes,we are,and we can offer the best price for you.
2.Payment issue:
We can accept 30% advance and before ship the goods to port pay the balance.
3.How about the quality?
Before place the order,we can offer the samples to you with free,you can check the quality.
Product Description:
·
• Speed range of 300-4000rpm.
• 3 programs storage capacity for routine applications.
• Automatic internal diagnosis.
• Maintenance free brushless DC motor.
Packaging & Shipping:
1set/ctn, ctn size:28.6*36.7*22.7cm,9.2kg
Our Services:
1.Can make the OEM.
2.Ship the goods to your designated place.
3.Other your request.(We have many cooperative express company,like:DHL, FedEx,UPS and so on.Every country we have cheap forwarder)
Company Information:
Our company is a professional supplier of medical/laboratory equipment and consumable.We´ll offer the products with high quality and best price.Any need,contact me freely.
FAQ:
1.Are you manufacturer?
Yes,we are,and we can offer the best price for you.
2.Payment issue:
We can accept 30% advance and before ship the goods to port pay the balance.
3.How about the quality?
Before place the order,we can offer the samples to you with free,you can check the quality.
Product category: Laboratory equipment
Laboratory Shaking Incubator/ Lab Shaker/ Incubator shaker
1. LYZ Shaking Incubator
Feature:
1. Integrated with incubator and shaker to save space and cost.
2. ABS shell, polished stainless steel chamber.
3. Large LCD screen to display temperature and shaking speed.
4. With operation data memory function to eliminate faulty operation.
5. Non-volatile memory saves settings during a power outage and automatically restarts the unit as originally programmed after power is restored.
6. Auto-stop operation when door is opened. Strong air spring rod with easy opening and closing.
7. Brushless DC motor, more stable and reliable.
8. Equipped with leakage protection.
Feature:
1. Integrated with incubator and shaker to save space and cost.
2. ABS shell, polished stainless steel chamber.
3. Large LCD screen to display temperature and shaking speed.
4. With operation data memory function to eliminate faulty operation.
5. Non-volatile memory saves settings during a power outage and automatically restarts the unit as originally programmed after power is restored.
6. Auto-stop operation when door is opened. Strong air spring rod with easy opening and closing.
7. Brushless DC motor, more stable and reliable.
8. Equipped with leakage protection.
Product category: Laboratory equipment
CO2 Incubator/ Benchtop CO2 Incubator/ Carbon Dioxide Incubator
Feature:
1. Water jacket and air jacket structure are available, polished stainless-steel chamber with air duct. Equipped with fan for forced convection, ensuring good temperature uniformity and the balance of CO2 concentration inside.
2. When door opened, the fan is automatically turned off and stop heating to reduce the pollution caused by the entry of air.
3. Large LCD screen and PID controller design. PID microprocessor is used to control temperature and air,meanwhile,the temperature of box ,water and door are separately controlled by three probes to ensure high accuracy. ( Air jacket is equipped with two probes to control door temperature and main body temperature.)
4. Flexible switch, each working status has LCD indication.
5. Alarm function for over-heating, lack of water, unaspirated, ensuring the safe operation of the equipment.
6. Equipped with sterile air filtration devices and UV light system to reduce pollution.
7. Natural evaporation for humidification, so that the chamber can maintain good humidity and the humidity can be displayed on screen.
8. Adopt gilded infrared probe in the detection of CO2 for precise measurement. The sensor life expectancy is up to 15 years. With alarm function for over concentration, slow concentration rising and unaspirated.
9. Equipped with leakage protection and auxiliary thermostat.
Options:
1. RS485/232 connector
2. CO2 pressure releasing valve
3. Wireless alarm system (SMS alarm system)
4. HEPA filter system
5. Automatic humidification system
6. 90℃ High temperature sterilization
1. Water jacket and air jacket structure are available, polished stainless-steel chamber with air duct. Equipped with fan for forced convection, ensuring good temperature uniformity and the balance of CO2 concentration inside.
2. When door opened, the fan is automatically turned off and stop heating to reduce the pollution caused by the entry of air.
3. Large LCD screen and PID controller design. PID microprocessor is used to control temperature and air,meanwhile,the temperature of box ,water and door are separately controlled by three probes to ensure high accuracy. ( Air jacket is equipped with two probes to control door temperature and main body temperature.)
4. Flexible switch, each working status has LCD indication.
5. Alarm function for over-heating, lack of water, unaspirated, ensuring the safe operation of the equipment.
6. Equipped with sterile air filtration devices and UV light system to reduce pollution.
7. Natural evaporation for humidification, so that the chamber can maintain good humidity and the humidity can be displayed on screen.
8. Adopt gilded infrared probe in the detection of CO2 for precise measurement. The sensor life expectancy is up to 15 years. With alarm function for over concentration, slow concentration rising and unaspirated.
9. Equipped with leakage protection and auxiliary thermostat.
Options:
1. RS485/232 connector
2. CO2 pressure releasing valve
3. Wireless alarm system (SMS alarm system)
4. HEPA filter system
5. Automatic humidification system
6. 90℃ High temperature sterilization
Product category: Laboratory equipment
L101 Student Biological Monocular Microscope With Factory Price
Configuration
Product name
L101 portable school round stage microscope for students
Viewing head
monocular head
Eyepiece
5x,10X,15x
Achromatic objective
5X 10X 45X (S)
Total magnification
25x-675x
Stage
Round Stage+slide clips 90*90mm
Nosepiece
triple
Condenser
Rotating disc diaphragm
Focusing
Separate coarse and fine adjustment, fine adjustment range 1.4mm-1.8mm
Illumination
Plan-concave mirror
Product name
L101 portable school round stage microscope for students
Viewing head
monocular head
Eyepiece
5x,10X,15x
Achromatic objective
5X 10X 45X (S)
Total magnification
25x-675x
Stage
Round Stage+slide clips 90*90mm
Nosepiece
triple
Condenser
Rotating disc diaphragm
Focusing
Separate coarse and fine adjustment, fine adjustment range 1.4mm-1.8mm
Illumination
Plan-concave mirror
Product category: Laboratory equipment
Medicine Stability Temperature And Humidity Testing Chamber
1. Dual refrigeration system.
2. Imported compressor with self-developed compressor cooling system, extend service life of the compressor.
3. Imported humidity sensor, ensuring high accuracy of humidity.
4. PID control for temperature and humidity, more accurate,easy menu operation interface.
5. Over-temperature alarm system:automatically stop working when exceeded the limit temperature and send out audible and visual alarm,ensure experiments run safely.
6. Large LCD screen to display more data at same time.
7. Newest multi-segment programmable control technology for temperature and humidity, high precision.With multiple programs and multiple cycles, each cycle is divided into 30 segments, each segment contains 99 hours and 99 minutes of cycle steps, it can happily meet almost all the complicated experiment process.
8. Equipped with JAKEL circulation fan ,unique designed air duct for good air circulation, ensuring good temperature uniformity inside.
9. Equipped with built-in stainless steel water tank at the bottom of equipment to supply water by pump for the humidification tank.
10. Equipped with spare temperature control which ensures the product work normally even the main temp.control failed(for heating).
11. Equipped with printer which can record and print the operating parameters at any time.
12. Mirror stainless steel chamber, adjustable shelf.
13. The chamber is equipped with a power socket and UV lamp for sterilization.
14. Double door design. Tempered glass inner door for clear observation. The outer door adopts magnetic seal design, good sealing performance.
2. Imported compressor with self-developed compressor cooling system, extend service life of the compressor.
3. Imported humidity sensor, ensuring high accuracy of humidity.
4. PID control for temperature and humidity, more accurate,easy menu operation interface.
5. Over-temperature alarm system:automatically stop working when exceeded the limit temperature and send out audible and visual alarm,ensure experiments run safely.
6. Large LCD screen to display more data at same time.
7. Newest multi-segment programmable control technology for temperature and humidity, high precision.With multiple programs and multiple cycles, each cycle is divided into 30 segments, each segment contains 99 hours and 99 minutes of cycle steps, it can happily meet almost all the complicated experiment process.
8. Equipped with JAKEL circulation fan ,unique designed air duct for good air circulation, ensuring good temperature uniformity inside.
9. Equipped with built-in stainless steel water tank at the bottom of equipment to supply water by pump for the humidification tank.
10. Equipped with spare temperature control which ensures the product work normally even the main temp.control failed(for heating).
11. Equipped with printer which can record and print the operating parameters at any time.
12. Mirror stainless steel chamber, adjustable shelf.
13. The chamber is equipped with a power socket and UV lamp for sterilization.
14. Double door design. Tempered glass inner door for clear observation. The outer door adopts magnetic seal design, good sealing performance.
Product category: Laboratory equipment
Laboratory water bath W420 Cycle Water Bath Microprocessor control Microprocessor control oil bath
Product Description:
WH420
Microprocessor control,
Digital display inner temperature
Good insulation performance with stainless
steel roof cover
With bakelite handle
Temperature range
RT+5℃~100℃
temperature fluctuation
temperature fluctuation≤±1℃ with a lid,
Heating power
1000W
Working size
400×180×130mm
Oil Bath
Microprocessor PID control
Digital display setting and actual
temperature
Digital display running timer
PID self-tuning , over temperature alarm
Automatic alarm after operation
Annular butterfly cover, easy to operate
High efficiency heat preservation material,
small heat loss
Packaging & Shipping:
1set/ctn, ctn size:52*33*32cm,7kg
WH420
Microprocessor control,
Digital display inner temperature
Good insulation performance with stainless
steel roof cover
With bakelite handle
Temperature range
RT+5℃~100℃
temperature fluctuation
temperature fluctuation≤±1℃ with a lid,
Heating power
1000W
Working size
400×180×130mm
Oil Bath
Microprocessor PID control
Digital display setting and actual
temperature
Digital display running timer
PID self-tuning , over temperature alarm
Automatic alarm after operation
Annular butterfly cover, easy to operate
High efficiency heat preservation material,
small heat loss
Packaging & Shipping:
1set/ctn, ctn size:52*33*32cm,7kg
Product category: Laboratory equipment
Laboratory Anaerobic Incubator
Feature:
1. Equipped with large LCD screen display,high-precision microcomputer control (with timing function), it can accurately and visually reflect the actual temperature inside the incubator, over heating alarm adopted, safe and reliable.
2. UV Sterilizer,effectively prevent bacterial contamination.
3. Switch control for solenoid valve, it can accurately adjust the flow and input any necessary gas.
4. Stainless steel cultivation and operation room,transparent impact-resistant glass front window for easy observation. Latex gloves are comfortable and reliable,easy to use.
5. Operation room is equipped with deoxidization catalyst.
6. The incubator is designed with a double widen door,it can put more petri dishes.
7. Equipped with leakage protection.
1. Equipped with large LCD screen display,high-precision microcomputer control (with timing function), it can accurately and visually reflect the actual temperature inside the incubator, over heating alarm adopted, safe and reliable.
2. UV Sterilizer,effectively prevent bacterial contamination.
3. Switch control for solenoid valve, it can accurately adjust the flow and input any necessary gas.
4. Stainless steel cultivation and operation room,transparent impact-resistant glass front window for easy observation. Latex gloves are comfortable and reliable,easy to use.
5. Operation room is equipped with deoxidization catalyst.
6. The incubator is designed with a double widen door,it can put more petri dishes.
7. Equipped with leakage protection.
Product category: Disposable articles for hospitals
Disposable Wooden Tongue Depressor Sterile Package
Quick Details:
- Product name: Wooden Tongue Depressor
- Material: Wooden
- Usage: Single-use
- OEM: Accept OEM
- Packing: 100pcs/box
- Smooth Surface, clean all edges beveled.
- Disposable ,single- use.
- Made from high quality wood with a polished finish nonsterile tongue depressors are tasteless odorless smooth providing superior patient comfort.
- Smooth surface, Non-sterile or sterilized.
Product category: Laboratory equipment
Automatic Haematology Analyzer
Features
l 3-part differentiation of WBC; 19parameters+3 histograms
l Carry-over prevented by automatic probe interior and exterior cleaning
l 2 counting modes: whole blood and prediluted
l Counting speed: 60 test per hour
l Automatic diluting, lyzing, mixing, rinsing
l Automatic cleaning sampling probe
l Automatic self-diagnosing and alarm function
l Internal real-time monitoring system
l Clog prevention and maintenance function
l Automatic 24 hours standby function
l Multiple report formats available
l Free cyanide reagent
Standard configuration:
· Main unit
· Internal thermal printer
· Standard accessories kit
· Standard kit of reagent for installation
l 3-part differentiation of WBC; 19parameters+3 histograms
l Carry-over prevented by automatic probe interior and exterior cleaning
l 2 counting modes: whole blood and prediluted
l Counting speed: 60 test per hour
l Automatic diluting, lyzing, mixing, rinsing
l Automatic cleaning sampling probe
l Automatic self-diagnosing and alarm function
l Internal real-time monitoring system
l Clog prevention and maintenance function
l Automatic 24 hours standby function
l Multiple report formats available
l Free cyanide reagent
Standard configuration:
· Main unit
· Internal thermal printer
· Standard accessories kit
· Standard kit of reagent for installation
Product category: Laboratory equipment
Laboratory Cooling Incubator/ Biochemical Incubator
Feature:
1. Imported compressor, automatic control for hot and cold.
2. Microprocessor temperature control with large LCD display, high precision.
3. Polished stainless steel chamber,moveable shelves can be freely adjusted, easy for cleaning.
4. Equipped with power supply outlet and lamp inside,easy observation.
5. The chamber equipped with fan for forced convection.
6. The surface coated, good appearance and maintenance.
7. Double door design, the inner door is made of tempered glass for easy observation,magnetic sealing design for outer door, good sealing.
8. Equipped with leakage protection.
9. Equipped with spare temperature control which ensures the product work normally even the main temperature control failed(for heating).
10. RS485 connector to connect computer and printer, temperature and time data can be displayed on computer and print.
1. Imported compressor, automatic control for hot and cold.
2. Microprocessor temperature control with large LCD display, high precision.
3. Polished stainless steel chamber,moveable shelves can be freely adjusted, easy for cleaning.
4. Equipped with power supply outlet and lamp inside,easy observation.
5. The chamber equipped with fan for forced convection.
6. The surface coated, good appearance and maintenance.
7. Double door design, the inner door is made of tempered glass for easy observation,magnetic sealing design for outer door, good sealing.
8. Equipped with leakage protection.
9. Equipped with spare temperature control which ensures the product work normally even the main temperature control failed(for heating).
10. RS485 connector to connect computer and printer, temperature and time data can be displayed on computer and print.
Product category: Laboratory equipment
0.1ul-10ml Lab adjustable volume micropipettor/pipettor/transferpettor/pipette
Feature:
1: Each Micropette supplied with an individual calibration certificate according to ISO8655.
2: Ergonomic design provides excellent operation experience
3: Easy to read volume display
4: The pipettes cover the volume range from 0.1ul to 10ml
5: Easy calibration and maintenance
6: Manufactured from innovative materials
1: Each Micropette supplied with an individual calibration certificate according to ISO8655.
2: Ergonomic design provides excellent operation experience
3: Easy to read volume display
4: The pipettes cover the volume range from 0.1ul to 10ml
5: Easy calibration and maintenance
6: Manufactured from innovative materials
Product category: Laboratory equipment
low speed DM 0412S portable laboratory centrifuge/ medical centrifuge/ electric centrifuge
DM0412 & DM0412S clinical centrifuges support applications with small sample volumes. The centrifuges are supplied with an angle rotor that can hold up to 15ml *8 or 10ml / 7ml / 5ml *12 vacuum tubes.
They are widely used in medical and veterinary practices for the centrifugation of blood and urine samples, in environmental analyses for the clarification of water and soil samples or in universities and other research institutes.
Features:
1.Easy programming to achieve high accuracy of speed control.
2.Easy operation with intuitive menu and easy-to-read display.
3.Rotor speed can be set and displayed by RPM or G-force.
4.Maintenance-free brushless DC motor.
5.Pressing and holding PULSE key for quick spin function
6.Lid with electric lock and automatic release function saves processing time and prevents
7.Automatic self-diagnosis on startup showing accumulative running time and last running parameters.
They are widely used in medical and veterinary practices for the centrifugation of blood and urine samples, in environmental analyses for the clarification of water and soil samples or in universities and other research institutes.
Features:
1.Easy programming to achieve high accuracy of speed control.
2.Easy operation with intuitive menu and easy-to-read display.
3.Rotor speed can be set and displayed by RPM or G-force.
4.Maintenance-free brushless DC motor.
5.Pressing and holding PULSE key for quick spin function
6.Lid with electric lock and automatic release function saves processing time and prevents
7.Automatic self-diagnosis on startup showing accumulative running time and last running parameters.
Product category: Laboratory equipment
medical/laboratory digital magnetic hotplate stirrers
Feature:
1.Digital temperature control with max. temperature up to 280°C
2.Digital speed control with max. speed up to 1500rpm
3.Stainless steel work plate with ceramic coating provides good chemical resistant performance
4.External temperature control is possible by connecting the temperature sensor(PT1000) with an accuracy at ±0.5°C
5.LED display shows temperature and speed
6.The “HOT” warning will flash when the work plate temperature is above 50°C even if the hotplate is turned off
1.Digital temperature control with max. temperature up to 280°C
2.Digital speed control with max. speed up to 1500rpm
3.Stainless steel work plate with ceramic coating provides good chemical resistant performance
4.External temperature control is possible by connecting the temperature sensor(PT1000) with an accuracy at ±0.5°C
5.LED display shows temperature and speed
6.The “HOT” warning will flash when the work plate temperature is above 50°C even if the hotplate is turned off
Product category: Laboratory equipment
Laboratory 80-2 Low Speed Centrifuge
instructions
1.The instrument should be placed on a stable work table, the environment should be clean and tidy, temperature, humidity and good ventilation.
2.Set the speed adjustment knob to the minimum position before using the instrument. The centrifugal tubes which need to be separated are inserted into the centrifugal tubes respectively. In order to make the instrument work smoothly. Avoid large vibrations. The material added to each centrifuge tube must be basically equal. And inserted symmetrically into the centrifugal tube. and then closed the cover plate.
3. Choose timing, the timing knob transferred to the "timing" or "ON" position.
4. Turn on the power supply and slowly adjust the speed control knob to the required speed. Before the shutdown, the speed control knob must be placed in the minimum position to turn off the power switch and cut off the power supply.
5. Before the shutdown, the speed control knob must be placed in the minimum position to turn off the power switch and cut off the power supply
maintaining
1.Use the instrument correctly and pay attention to the maintenance of the instrument, make it in good working condition, can extend the service life of the instrument.
2.The instrument should be checked regularly three months during continuous operation:Check whether there is water drop, dirt, etc. falling into the motor and control assembly, check carbon brush, fuse, control assembly and fastening screw,After using for a period of time, if the speed of the centrifuge becomes slow, please check the carbon brush and replace it in time.(Replacement method: cut off the power, open the bottom plate, remove the circular plastic cap near the bottom of the motor, and replace the old carbon brush with the new one)
3.After long-term use of the instrument, natural wear is normal. If the machine is found to have abnormal noise, bearing wear of the motor, failure of electronic control components and other faults after one year of use, the company will continue to provide quality services and provide assistance.
1.The instrument should be placed on a stable work table, the environment should be clean and tidy, temperature, humidity and good ventilation.
2.Set the speed adjustment knob to the minimum position before using the instrument. The centrifugal tubes which need to be separated are inserted into the centrifugal tubes respectively. In order to make the instrument work smoothly. Avoid large vibrations. The material added to each centrifuge tube must be basically equal. And inserted symmetrically into the centrifugal tube. and then closed the cover plate.
3. Choose timing, the timing knob transferred to the "timing" or "ON" position.
4. Turn on the power supply and slowly adjust the speed control knob to the required speed. Before the shutdown, the speed control knob must be placed in the minimum position to turn off the power switch and cut off the power supply.
5. Before the shutdown, the speed control knob must be placed in the minimum position to turn off the power switch and cut off the power supply
maintaining
1.Use the instrument correctly and pay attention to the maintenance of the instrument, make it in good working condition, can extend the service life of the instrument.
2.The instrument should be checked regularly three months during continuous operation:Check whether there is water drop, dirt, etc. falling into the motor and control assembly, check carbon brush, fuse, control assembly and fastening screw,After using for a period of time, if the speed of the centrifuge becomes slow, please check the carbon brush and replace it in time.(Replacement method: cut off the power, open the bottom plate, remove the circular plastic cap near the bottom of the motor, and replace the old carbon brush with the new one)
3.After long-term use of the instrument, natural wear is normal. If the machine is found to have abnormal noise, bearing wear of the motor, failure of electronic control components and other faults after one year of use, the company will continue to provide quality services and provide assistance.
Product category: Laboratory equipment
Laboratory 80-1 Low Speed Centrifuge
instructions
1.The instrument should be placed on a stable work table, the environment should be clean and tidy, temperature, humidity and good ventilation.
2.Set the speed adjustment knob to the minimum position before using the instrument. The centrifugal tubes which need to be separated are inserted into the centrifugal tubes respectively. In order to make the instrument work smoothly. Avoid large vibrations. The material added to each centrifuge tube must be basically equal. And inserted symmetrically into the centrifugal tube. and then closed the cover plate.
3. Choose timing, the timing knob transferred to the "timing" or "ON" position.
4. Turn on the power supply and slowly adjust the speed control knob to the required speed. Before the shutdown, the speed control knob must be placed in the minimum position to turn off the power switch and cut off the power supply.
5. Before the shutdown, the speed control knob must be placed in the minimum position to turn off the power switch and cut off the power supply
maintaining
1.Use the instrument correctly and pay attention to the maintenance of the instrument, make it in good working condition, can extend the service life of the instrument.
2.The instrument should be checked regularly three months during continuous operation:Check whether there is water drop, dirt, etc. falling into the motor and control assembly, check carbon brush, fuse, control assembly and fastening screw,After using for a period of time, if the speed of the centrifuge becomes slow, please check the carbon brush and replace it in time.(Replacement method: cut off the power, open the bottom plate, remove the circular plastic cap near the bottom of the motor, and replace the old carbon brush with the new one)
3.After long-term use of the instrument, natural wear is normal. If the machine is found to have abnormal noise, bearing wear of the motor, failure of electronic control components and other faults after one year of use, the company will continue to provide quality services and provide assistance.
1.The instrument should be placed on a stable work table, the environment should be clean and tidy, temperature, humidity and good ventilation.
2.Set the speed adjustment knob to the minimum position before using the instrument. The centrifugal tubes which need to be separated are inserted into the centrifugal tubes respectively. In order to make the instrument work smoothly. Avoid large vibrations. The material added to each centrifuge tube must be basically equal. And inserted symmetrically into the centrifugal tube. and then closed the cover plate.
3. Choose timing, the timing knob transferred to the "timing" or "ON" position.
4. Turn on the power supply and slowly adjust the speed control knob to the required speed. Before the shutdown, the speed control knob must be placed in the minimum position to turn off the power switch and cut off the power supply.
5. Before the shutdown, the speed control knob must be placed in the minimum position to turn off the power switch and cut off the power supply
maintaining
1.Use the instrument correctly and pay attention to the maintenance of the instrument, make it in good working condition, can extend the service life of the instrument.
2.The instrument should be checked regularly three months during continuous operation:Check whether there is water drop, dirt, etc. falling into the motor and control assembly, check carbon brush, fuse, control assembly and fastening screw,After using for a period of time, if the speed of the centrifuge becomes slow, please check the carbon brush and replace it in time.(Replacement method: cut off the power, open the bottom plate, remove the circular plastic cap near the bottom of the motor, and replace the old carbon brush with the new one)
3.After long-term use of the instrument, natural wear is normal. If the machine is found to have abnormal noise, bearing wear of the motor, failure of electronic control components and other faults after one year of use, the company will continue to provide quality services and provide assistance.
Product category: Laboratory equipment
Laboratory 80-2B Low Speed Centrifuge
instructions
1.The instrument should be placed on a stable work table, the environment should be clean and tidy, temperature, humidity and good ventilation.
2.Set the speed adjustment knob to the minimum position before using the instrument. The centrifugal tubes which need to be separated are inserted into the centrifugal tubes respectively. In order to make the instrument work smoothly. Avoid large vibrations. The material added to each centrifuge tube must be basically equal. And inserted symmetrically into the centrifugal tube. and then closed the cover plate.
3. Choose timing, the timing knob transferred to the "timing" or "ON" position.
4. Turn on the power supply and slowly adjust the speed control knob to the required speed. Before the shutdown, the speed control knob must be placed in the minimum position to turn off the power switch and cut off the power supply.
5. Before the shutdown, the speed control knob must be placed in the minimum position to turn off the power switch and cut off the power supply
maintaining
1.Use the instrument correctly and pay attention to the maintenance of the instrument, make it in good working condition, can extend the service life of the instrument.
2.The instrument should be checked regularly three months during continuous operation:Check whether there is water drop, dirt, etc. falling into the motor and control assembly, check carbon brush, fuse, control assembly and fastening screw,After using for a period of time, if the speed of the centrifuge becomes slow, please check the carbon brush and replace it in time.(Replacement method: cut off the power, open the bottom plate, remove the circular plastic cap near the bottom of the motor, and replace the old carbon brush with the new one)
3.After long-term use of the instrument, natural wear is normal. If the machine is found to have abnormal noise, bearing wear of the motor, failure of electronic control components and other faults after one year of use, the company will continue to provide quality services and provide assistance.
1.The instrument should be placed on a stable work table, the environment should be clean and tidy, temperature, humidity and good ventilation.
2.Set the speed adjustment knob to the minimum position before using the instrument. The centrifugal tubes which need to be separated are inserted into the centrifugal tubes respectively. In order to make the instrument work smoothly. Avoid large vibrations. The material added to each centrifuge tube must be basically equal. And inserted symmetrically into the centrifugal tube. and then closed the cover plate.
3. Choose timing, the timing knob transferred to the "timing" or "ON" position.
4. Turn on the power supply and slowly adjust the speed control knob to the required speed. Before the shutdown, the speed control knob must be placed in the minimum position to turn off the power switch and cut off the power supply.
5. Before the shutdown, the speed control knob must be placed in the minimum position to turn off the power switch and cut off the power supply
maintaining
1.Use the instrument correctly and pay attention to the maintenance of the instrument, make it in good working condition, can extend the service life of the instrument.
2.The instrument should be checked regularly three months during continuous operation:Check whether there is water drop, dirt, etc. falling into the motor and control assembly, check carbon brush, fuse, control assembly and fastening screw,After using for a period of time, if the speed of the centrifuge becomes slow, please check the carbon brush and replace it in time.(Replacement method: cut off the power, open the bottom plate, remove the circular plastic cap near the bottom of the motor, and replace the old carbon brush with the new one)
3.After long-term use of the instrument, natural wear is normal. If the machine is found to have abnormal noise, bearing wear of the motor, failure of electronic control components and other faults after one year of use, the company will continue to provide quality services and provide assistance.
Product category: Laboratory equipment
Laboratory Portable D1008 Palm Micro Centrifuge
Features:
1.Ideal for microfiltration and quick spin-downs
2.Easy-to-use with dual start/stop function
3.10000rpm fixed speed(D1008U)
4.7000rpm fixed speed(D1008)
5.5000rpm fixed speed(D1008E)
6.Compatible with 2ml*8 and PCR8*2 rotors
7.Quiet running, noise level ≤45dB
8.Rotor change without tools
9. Accelerates and brakes in seconds
10. Four colors available,green, blue, yellow and pink, add color to your routine laboratory life
1.Ideal for microfiltration and quick spin-downs
2.Easy-to-use with dual start/stop function
3.10000rpm fixed speed(D1008U)
4.7000rpm fixed speed(D1008)
5.5000rpm fixed speed(D1008E)
6.Compatible with 2ml*8 and PCR8*2 rotors
7.Quiet running, noise level ≤45dB
8.Rotor change without tools
9. Accelerates and brakes in seconds
10. Four colors available,green, blue, yellow and pink, add color to your routine laboratory life
Product category: Patient beds and nursing beds
Eight Functions Electric Hospital Bed
Size: L2240*W1100*H450·720mm
1 )ABS head & foot board. Power coated steel punching bed surface with sort connection.
four pieces tuck away ABS guardrails.central control 6 lnch casters.
2)1nstanl CPR release, degree show function at bed rails.
3)Auto contour .(head & knee together moving functions)
4)Trenlelenburg and reserve Trendeleburg with control on both sides and hand set Functions
5)Battery back-up.mobile-5" casters adopt centrol system.which Is stable and reliable,firth
wheel for better steering and weight distribution.
6)Zero transfer gap retracting side rails for easy patients transfer , long and short bed rail
instant the control box for patient more safely.
7)One batton control for trenlelenburg,emergency services, be free from the bed, chairposition.
Function:
Back fold-up: 0- 70 ° (±5° )
Leg fold-up: 0- 45° (±5° )
Bed rniseand down: 450-720mm
Trcn lelcnburg and reserve Trcndclcburg, 0-13 (±5° )
Bed tilts 10 right or left
1 )ABS head & foot board. Power coated steel punching bed surface with sort connection.
four pieces tuck away ABS guardrails.central control 6 lnch casters.
2)1nstanl CPR release, degree show function at bed rails.
3)Auto contour .(head & knee together moving functions)
4)Trenlelenburg and reserve Trendeleburg with control on both sides and hand set Functions
5)Battery back-up.mobile-5" casters adopt centrol system.which Is stable and reliable,firth
wheel for better steering and weight distribution.
6)Zero transfer gap retracting side rails for easy patients transfer , long and short bed rail
instant the control box for patient more safely.
7)One batton control for trenlelenburg,emergency services, be free from the bed, chairposition.
Function:
Back fold-up: 0- 70 ° (±5° )
Leg fold-up: 0- 45° (±5° )
Bed rniseand down: 450-720mm
Trcn lelcnburg and reserve Trcndclcburg, 0-13 (±5° )
Bed tilts 10 right or left
Product category: Laboratory equipment
Laboratory Blood Mixer roller for blood tube mixer
ZM7 blood mixer
Product Description:
1.The 7D series features digital display, speed and time
2.With 360 degrees of rolling and swaying motion -
anticoagulated blood in the bottle tube can provide
sufficient and effective mixing
3.Apply to dry powder reagent, freeze drying, quality
control material mixing,
4.Suitable for different specifications of test tube
Motion type Roll & swing
Speed range 20-80rpm
Amplitude 22mm
Power 15w
Packaging & Shipping:
1set/ctn, ctn size:49*36*22cm,4.7kg
Product Description:
1.The 7D series features digital display, speed and time
2.With 360 degrees of rolling and swaying motion -
anticoagulated blood in the bottle tube can provide
sufficient and effective mixing
3.Apply to dry powder reagent, freeze drying, quality
control material mixing,
4.Suitable for different specifications of test tube
Motion type Roll & swing
Speed range 20-80rpm
Amplitude 22mm
Power 15w
Packaging & Shipping:
1set/ctn, ctn size:49*36*22cm,4.7kg
Product category: Patient beds and nursing beds
Electric operation table (electric hydraulic) KL-D.III (New Model)
length: 2000±100mm
width: 520±20mm;
min-max height: (700-1150)±50mm
Trendelenburg: ≥ 28° Rev-Trend: ≥ 28°
leftward: ≥20° Rightward: ≥ 20°
head board Upward: ≥ 50° Downward: ≥ 90°
backboard Upward: ≥ 75° Downward: ≥ 50°
leg board Upward: ≥ 10° Downward: ≥ 90°
leg board outwards:≥180°
mains voltage: AC220 50HZ
accumulator Cell: 12V 12Ah
input power: 500VA
Horizontal and longtidinal movement: 300±30mm
width: 520±20mm;
min-max height: (700-1150)±50mm
Trendelenburg: ≥ 28° Rev-Trend: ≥ 28°
leftward: ≥20° Rightward: ≥ 20°
head board Upward: ≥ 50° Downward: ≥ 90°
backboard Upward: ≥ 75° Downward: ≥ 50°
leg board Upward: ≥ 10° Downward: ≥ 90°
leg board outwards:≥180°
mains voltage: AC220 50HZ
accumulator Cell: 12V 12Ah
input power: 500VA
Horizontal and longtidinal movement: 300±30mm
Product category: Patient beds and nursing beds
Hydraulic transfer stretcher Trolley
Size : L2130*W750mm
Top coat:Electrostatic power coating;
Bed frame.Cold-rolled steel tube
Two separate hydraulic pump.whole bed he.ight position adjustable Backrest & footrest function,Trendelenbu『g & Reversed Trendelenburg position
Back boa『d is through X-ray
Central brake system with 6 inch castors,
central height adjustable guide wheel
Accessory with mattress and IV pole
Top coat:Electrostatic power coating;
Bed frame.Cold-rolled steel tube
Two separate hydraulic pump.whole bed he.ight position adjustable Backrest & footrest function,Trendelenbu『g & Reversed Trendelenburg position
Back boa『d is through X-ray
Central brake system with 6 inch castors,
central height adjustable guide wheel
Accessory with mattress and IV pole
Product category: Patient beds and nursing beds
Operation Transfer Trolley
Size: L 1930*W650*520-820mm
Hand rescue vehicles, hand shake clockwise, counte rclockwise direction to the body Shaking, body down .
A clear arrow mark indicating the user to operate Central brake system with 6 inch castor,
with central guide wheel for control the Direction of the vehicle body .
Hi-low range: 520-820mm
Accessory with mattress and IV pole.
Hand rescue vehicles, hand shake clockwise, counte rclockwise direction to the body Shaking, body down .
A clear arrow mark indicating the user to operate Central brake system with 6 inch castor,
with central guide wheel for control the Direction of the vehicle body .
Hi-low range: 520-820mm
Accessory with mattress and IV pole.
Product category: Patient beds and nursing beds
Electric operation table (electric hydraulic) KL-D.IA-I
length:2000±100mm
width: 520 ±20mm
min-max height:(560-860)±50mm
Trendelenburg:≥20° Rev-Trend:≥18°
leftward:≥20° rightward:≥20°
leg board fold downward:≥90° fold outward:≥180°
back board fold upward:≥70° fold downward:≥20°
head board fold upward:≥50° fold downward:≥90°
waist board lifting:120mm
mains voltage:AC 220V±10% 50Hz
input power:500VA
width: 520 ±20mm
min-max height:(560-860)±50mm
Trendelenburg:≥20° Rev-Trend:≥18°
leftward:≥20° rightward:≥20°
leg board fold downward:≥90° fold outward:≥180°
back board fold upward:≥70° fold downward:≥20°
head board fold upward:≥50° fold downward:≥90°
waist board lifting:120mm
mains voltage:AC 220V±10% 50Hz
input power:500VA
Product category: Patient beds and nursing beds
Electric operation table (electric gear) DL.A
Length:2000±100mm
Width:520±20mm
min-max height:(750-1000)±50mm
Trendelenburg:≥18° Rev-Trend:≥18°
leftward≥15° rightward≥15°
head board fold upward:≥40° fold downward:≥90°
leg board fold upward:≥15° fold downward:≥90°
back board fold upward:≥70° fold downward:≥15°
waist board lifting: 100mm
horizontal and longitudinal movement:350±30mm
mains voltage:AC 220V±10% 50Hz
input power:300VA
Width:520±20mm
min-max height:(750-1000)±50mm
Trendelenburg:≥18° Rev-Trend:≥18°
leftward≥15° rightward≥15°
head board fold upward:≥40° fold downward:≥90°
leg board fold upward:≥15° fold downward:≥90°
back board fold upward:≥70° fold downward:≥15°
waist board lifting: 100mm
horizontal and longitudinal movement:350±30mm
mains voltage:AC 220V±10% 50Hz
input power:300VA
Product category: Patient beds and nursing beds
Luxurious Hydralic Stretcher Trolley
Size: L21oo*wsso*H630-950mm
1. Top coated: Electrostatic powder coating, bed frame : cold-rolled steel coating
2. Stainless steel and aluminum alloy side rails
3. Two separate Hydraulic pump; With hydraulic panel
4. Rise & fall guard wheel
5. Back board through X-ray
6. Acoessory with mattress, IV pole
7. Function
Back-rest lifting : o.75•
Leg-rest lifting：0•-45•
Reversed trendelenburg : o• -15°
Trendelenburg: 0°-15°
CPR function
1. Top coated: Electrostatic powder coating, bed frame : cold-rolled steel coating
2. Stainless steel and aluminum alloy side rails
3. Two separate Hydraulic pump; With hydraulic panel
4. Rise & fall guard wheel
5. Back board through X-ray
6. Acoessory with mattress, IV pole
7. Function
Back-rest lifting : o.75•
Leg-rest lifting：0•-45•
Reversed trendelenburg : o• -15°
Trendelenburg: 0°-15°
CPR function
Product category: Patient beds and nursing beds
Electric operation table (electric gear) DL.C-I
Length:2000±100mm
Width:520±20mm
min-max height:(750-1000)±50mm
Trendelenburg:≥15° Rev-Trend:≥15°
leftward≥15° rightward≥15°
head board fold upward:≥40° fold downward:≥90°
leg board fold downward:≥90° fold upward:≥15°
back board fold upward:≥60° fold downward:≥30°
waist board lifting: 100mm
mains voltage:AC 220V±10% 50Hz
input power:300VA
1.Imported Denmark Linak gear engine
2.with battery
3.separate leg part
4.by hand and panel control
Width:520±20mm
min-max height:(750-1000)±50mm
Trendelenburg:≥15° Rev-Trend:≥15°
leftward≥15° rightward≥15°
head board fold upward:≥40° fold downward:≥90°
leg board fold downward:≥90° fold upward:≥15°
back board fold upward:≥60° fold downward:≥30°
waist board lifting: 100mm
mains voltage:AC 220V±10% 50Hz
input power:300VA
1.Imported Denmark Linak gear engine
2.with battery
3.separate leg part
4.by hand and panel control
Product category: Patient beds and nursing beds
Electric ophthalmic operation table (electric hydraulic) KL-YS.A
length:1970 ±50mm
width: 600 ±20mm
height: (550-800) ±50mm
Trendelenburg:≥15° Rev-Trend:≥15°
head board fold upward: ≥20° fold downward: ≥90°
Main Voltage AC: 220V 50Hz
Input power: 500VA
1.Imported hydraulic engine
2.Impoted electromagnetic valve
3.Impoted sealing ring
width: 600 ±20mm
height: (550-800) ±50mm
Trendelenburg:≥15° Rev-Trend:≥15°
head board fold upward: ≥20° fold downward: ≥90°
Main Voltage AC: 220V 50Hz
Input power: 500VA
1.Imported hydraulic engine
2.Impoted electromagnetic valve
3.Impoted sealing ring
Product category: Patient beds and nursing beds
Universal operation table (manual) JY.A
Length: 2000±50mm
Width: 500±20mm
min-max height:(700-950)±50mm
Trendelenburg:≥20° Rev-Trend:≥15°
leftward≥15° rightward≥15°
Back board Folding upward≥75° downward:≥15°
Head board Fold upward≥30° Fold downward≥90°
Leg board Folding downward≥90°
Waist board elevation ≥80mm
1.Has cassette path
2.Do X-ray
3.Air Spring control system
Width: 500±20mm
min-max height:(700-950)±50mm
Trendelenburg:≥20° Rev-Trend:≥15°
leftward≥15° rightward≥15°
Back board Folding upward≥75° downward:≥15°
Head board Fold upward≥30° Fold downward≥90°
Leg board Folding downward≥90°
Waist board elevation ≥80mm
1.Has cassette path
2.Do X-ray
3.Air Spring control system
Product category: Patient beds and nursing beds
Universal operation table (manual) JY.C
Length: 2000±50mm
Width: 500±20mm
min-max height:(700-950)±50mm
Trendelenburg:≥15° Rev-Trend:≥15°
leftward≥15° rightward≥15°
Back board upward:≥60° Back board downward:≥20°
Head board Fold upward≥30° Fold downward≥90°
Leg board Folding downward≥90°
1.Do X-ray&C-arm
2.Head-leg part exchange
3.Air Spring control system
Width: 500±20mm
min-max height:(700-950)±50mm
Trendelenburg:≥15° Rev-Trend:≥15°
leftward≥15° rightward≥15°
Back board upward:≥60° Back board downward:≥20°
Head board Fold upward≥30° Fold downward≥90°
Leg board Folding downward≥90°
1.Do X-ray&C-arm
2.Head-leg part exchange
3.Air Spring control system
Product category: Laboratory equipment
Digital Bottle Top Dispenser-dFlow-Without Brown reagent bottle
Digital Bottle Top Dispenser
Product Description:
·
• Motor operation minimizes the grip force
• Electronic control decreases the repetitive strain injury
• Remote control panel prevents manual disturbance during operation
• Two Dispensing modes
• dispenser
• stepper function
Packaging & Shipping:
1set/ctn,1set/ctn size:22*18*12cm,1.52kg
Our Services:
1.Can make the OEM.
2.Ship the goods to your designated place.
3.Other your request.(We have many cooperative express company,like:DHL, FedEx,UPS and so on.Every country we have cheap forwarder)
Company Information:
Our company is a professional supplier of medical/laboratory equipment and consumable.We´ll offer the products with high quality and best price.Any need,contact me freely.
FAQ:
1.Are you manufacturer?
Yes,we are,and we can offer the best price for you.
2.Payment issue:
We can accept 30% advance and before ship the goods to port pay the balance.
3.How about the quality?
Before place the order,we can offer the samples to you with free,you can check the quality.
Product Description:
·
• Motor operation minimizes the grip force
• Electronic control decreases the repetitive strain injury
• Remote control panel prevents manual disturbance during operation
• Two Dispensing modes
• dispenser
• stepper function
Packaging & Shipping:
1set/ctn,1set/ctn size:22*18*12cm,1.52kg
Our Services:
1.Can make the OEM.
2.Ship the goods to your designated place.
3.Other your request.(We have many cooperative express company,like:DHL, FedEx,UPS and so on.Every country we have cheap forwarder)
Company Information:
Our company is a professional supplier of medical/laboratory equipment and consumable.We´ll offer the products with high quality and best price.Any need,contact me freely.
FAQ:
1.Are you manufacturer?
Yes,we are,and we can offer the best price for you.
2.Payment issue:
We can accept 30% advance and before ship the goods to port pay the balance.
3.How about the quality?
Before place the order,we can offer the samples to you with free,you can check the quality.
Product category: Patient beds and nursing beds
Universal operation table (manual) JY.D
Length: 2000±50mm
Width: 500±20mm
min-max height:(740-1000)±50mm
Horizontal rotary: 360°
Trendelenburg:≥20° Rev-Trend:≥15°
leftward≥25° rightward≥25°
Back board upward:≥60° Back board downward:≥10°
Head board Fold upward≥30° Fold downward≥90°
Leg board Folding downward≥90°
Leg of the board spilt: 180°
Width: 500±20mm
min-max height:(740-1000)±50mm
Horizontal rotary: 360°
Trendelenburg:≥20° Rev-Trend:≥15°
leftward≥25° rightward≥25°
Back board upward:≥60° Back board downward:≥10°
Head board Fold upward≥30° Fold downward≥90°
Leg board Folding downward≥90°
Leg of the board spilt: 180°
Product category: Patient beds and nursing beds
Electric obstetric bed (electric gear) KL-CB.II
Length: 1900mm± 50mm
Width: 80mm± 50mm
min-max height:(550-800)±50mm
Backboard up folded: ≥60°
Trendelenburg:≥5° Rev-Trend:≥12°
Foot board height adjustment:≥100mm
Foot board upward:≥40° Foot board outward:≥90°
input power: 150±10%
1.Imported Denmark Linak gear engine
"2.Chair type position
"
3.ultra-low position
Width: 80mm± 50mm
min-max height:(550-800)±50mm
Backboard up folded: ≥60°
Trendelenburg:≥5° Rev-Trend:≥12°
Foot board height adjustment:≥100mm
Foot board upward:≥40° Foot board outward:≥90°
input power: 150±10%
1.Imported Denmark Linak gear engine
"2.Chair type position
"
3.ultra-low position
Product category: Patient beds and nursing beds
Electric gynecological diagnosing table (electric gear) KL-FS.I NEW
length: 1350mm±50mm
width: 550mm±30mm
height: (700mm-900mm)±50mm
Backboard upwards: 60°
Trendelenburg/Rev-Trend:15°/12°
auxiliary table: (length:350mm width:480mm)±20mm
power voltage: 220V 50Hz
1.Imported Denmark Linak motor
2.Leg support frame can fold up and down electriclly
3.Standard accessories:
leg holder(1 set)
arc-shaped armrest(1set)
basin(1pc)
hand remote controller(1pc)
foot pedal remote controller(1pc)
width: 550mm±30mm
height: (700mm-900mm)±50mm
Backboard upwards: 60°
Trendelenburg/Rev-Trend:15°/12°
auxiliary table: (length:350mm width:480mm)±20mm
power voltage: 220V 50Hz
1.Imported Denmark Linak motor
2.Leg support frame can fold up and down electriclly
3.Standard accessories:
leg holder(1 set)
arc-shaped armrest(1set)
basin(1pc)
hand remote controller(1pc)
foot pedal remote controller(1pc)
Product category: Patient beds and nursing beds
Electric gynecological diagnosing table (electric gear) KL-FS.V
length: 1450mm±50mm
width: 520mm±30mm
Trendelenburg/Rev-Trend:10°/25°
The leg support movement area:100
auxiliary table: 360mm
power voltage: 220V 50Hz
1.Imported Denmark Linak motor
2.Standard accessories:
leg holder(1 set)
Bearing the combiner(1set)
basin(1pc)
Foot stepping switch 1pc
width: 520mm±30mm
Trendelenburg/Rev-Trend:10°/25°
The leg support movement area:100
auxiliary table: 360mm
power voltage: 220V 50Hz
1.Imported Denmark Linak motor
2.Standard accessories:
leg holder(1 set)
Bearing the combiner(1set)
basin(1pc)
Foot stepping switch 1pc
Product category: Patient beds and nursing beds
Electric gynecological diagnosing table (electric gear) KL-FS.II
length: 1270mm±50mm
width: 550mm±30mm
height: (700mm-1000mm)±50mm
Backboard upwards: 40°
Trendelenburg/Rev-Trend:5°/12°
Leg support reflx: 30°
auxiliary table: (length:350mm width:480mm)±20mm
power voltage: 220V 50Hz
1.Auto-restoring function
2.Imported Denmark Linak motor
3.Leg support frame can fold up and down electriclly
3.Standard accessories:
leg holder(1 set)
arc-shaped armrest(1set)
basin(1pc)
hand remote controller(1pc)
foot pedal remote controller(1pc)
width: 550mm±30mm
height: (700mm-1000mm)±50mm
Backboard upwards: 40°
Trendelenburg/Rev-Trend:5°/12°
Leg support reflx: 30°
auxiliary table: (length:350mm width:480mm)±20mm
power voltage: 220V 50Hz
1.Auto-restoring function
2.Imported Denmark Linak motor
3.Leg support frame can fold up and down electriclly
3.Standard accessories:
leg holder(1 set)
arc-shaped armrest(1set)
basin(1pc)
hand remote controller(1pc)
foot pedal remote controller(1pc)
Product category: Patient beds and nursing beds
Gynecological diagnosing table (manual) KL-FS.III
table length: 1300mm±50mm
table width: 550mm±30mm
auxiliary table: (length:350mm width:450mm)±20mm
Trendelenburg/Rev-Trend:5°/12°
Backboard up folded: ≥70°
height adjustment: (700-950)±50mm
working aera sliding: 500mm
1.forward & backward is airspring control
2.Backboard up folded is airspring control
3.up and down is hydraulic foot control
4.Imported Y type sealing ring
table width: 550mm±30mm
auxiliary table: (length:350mm width:450mm)±20mm
Trendelenburg/Rev-Trend:5°/12°
Backboard up folded: ≥70°
height adjustment: (700-950)±50mm
working aera sliding: 500mm
1.forward & backward is airspring control
2.Backboard up folded is airspring control
3.up and down is hydraulic foot control
4.Imported Y type sealing ring
Product category: Patient beds and nursing beds
Multifunctional operation table (manual&two side control) 3001
length:2100±50mm
Width:480±20mm
height:（750—950）mm±50mm
Trendelenburg/Rev-Trend:20°/15°
leftward≥15° rightward≥15°
Head board Fold upward≥40° Fold downward≥90°
Back board Fold upward≥75° Fold downward≥18°
Leg board Fold downward≥90°
Waist board elevation: 100mm
1.Base is metalized cold-plate
2.Imported Y type sealing ring
3.all actions are controlled on both sides
Width:480±20mm
height:（750—950）mm±50mm
Trendelenburg/Rev-Trend:20°/15°
leftward≥15° rightward≥15°
Head board Fold upward≥40° Fold downward≥90°
Back board Fold upward≥75° Fold downward≥18°
Leg board Fold downward≥90°
Waist board elevation: 100mm
1.Base is metalized cold-plate
2.Imported Y type sealing ring
3.all actions are controlled on both sides
Product category: Laboratory equipment
OS20-Pro LCD Digital Overhead Stirrer Max. stirring quantity 20L
OS20-Pro LCD Digital Overhead Stirrer
Product Description:
·
High reliability and outstanding performance.
LCD display for precise monitoring of set and actual speeds, a wide range of speed from 50 to 2200rpm with control accuracy of ±3rpm.
Brushless DC motor for long life, maintenance free and explosion proof Torque trend display for real-time information on viscosity ,changes.
Safety circuits allow for safe stop function in anti-stall or overload conditions.
Smooth operation prevents accidental spillage and splashing.
Provides constant speed even with changes in viscosities of the samples.
Remote function provide PC control and data transmission.
Availability of auto-restart function in case of power loss for overnight operations.
Packaging & Shipping:
1set/ctn,1set/ctn size:8.3*22*18.6cm,2.8kg
Our Services:
1.Can make the OEM.
2.Ship the goods to your designated place.
3.Other your request.(We have many cooperative express company,like:DHL, FedEx,UPS and so on.Every country we have cheap forwarder)
Company Information:
Our company is a professional supplier of medical/laboratory equipment and consumable.We´ll offer the products with high quality and best price.Any need,contact me freely.
Product Description:
·
High reliability and outstanding performance.
LCD display for precise monitoring of set and actual speeds, a wide range of speed from 50 to 2200rpm with control accuracy of ±3rpm.
Brushless DC motor for long life, maintenance free and explosion proof Torque trend display for real-time information on viscosity ,changes.
Safety circuits allow for safe stop function in anti-stall or overload conditions.
Smooth operation prevents accidental spillage and splashing.
Provides constant speed even with changes in viscosities of the samples.
Remote function provide PC control and data transmission.
Availability of auto-restart function in case of power loss for overnight operations.
Packaging & Shipping:
1set/ctn,1set/ctn size:8.3*22*18.6cm,2.8kg
Our Services:
1.Can make the OEM.
2.Ship the goods to your designated place.
3.Other your request.(We have many cooperative express company,like:DHL, FedEx,UPS and so on.Every country we have cheap forwarder)
Company Information:
Our company is a professional supplier of medical/laboratory equipment and consumable.We´ll offer the products with high quality and best price.Any need,contact me freely.
Product category: Patient beds and nursing beds
Multifunctional operation table (manual&two side control) 3001A
length:2100±50mm
Width:480±20mm
height:（750—950）mm±50mm
Trendelenburg/Rev-Trend:20°/15°
leftward≥15° rightward≥15°
Head board Fold upward≥30° Fold downward≥90°
Back board Fold upward≥75° Fold downward≥10°
Leg board Fold downward≥90°
Waist board elevation: 100mm
1.Base is metalized cold-plate
2.Imported Y type sealing ring
3.all actions are controlled on both sides
Width:480±20mm
height:（750—950）mm±50mm
Trendelenburg/Rev-Trend:20°/15°
leftward≥15° rightward≥15°
Head board Fold upward≥30° Fold downward≥90°
Back board Fold upward≥75° Fold downward≥10°
Leg board Fold downward≥90°
Waist board elevation: 100mm
1.Base is metalized cold-plate
2.Imported Y type sealing ring
3.all actions are controlled on both sides
Product category: Patient beds and nursing beds
Multifunctional operation table (manual&two side control) 3001B
length:2100±50mm
Width:480±20mm
height:（750—950）mm±50mm
Trendelenburg/Rev-Trend:20°/15°
leftward≥15° rightward≥15°
Head board Fold upward≥40° Fold downward≥90°
Back board Fold upward≥75° Fold downward≥18°
Leg board downward≥90° Leg of the board spilt:180°
Waist board elevation : 100mm
1.Base is stainless steel
2.Table-board is stainless steel
3. Do x-ray
4.Imported Y type sealing ring
Width:480±20mm
height:（750—950）mm±50mm
Trendelenburg/Rev-Trend:20°/15°
leftward≥15° rightward≥15°
Head board Fold upward≥40° Fold downward≥90°
Back board Fold upward≥75° Fold downward≥18°
Leg board downward≥90° Leg of the board spilt:180°
Waist board elevation : 100mm
1.Base is stainless steel
2.Table-board is stainless steel
3. Do x-ray
4.Imported Y type sealing ring
Product category: Patient beds and nursing beds
Multifunctional operation table (manual&head control) 3008
length: 2050±50mm
Width: 480±20mm
height:（750—950）mm ±50mm
Trendelenburg/Rev-Trend:20°
leftward≥20° rightward≥20°
Head board Fold upward≥30° Fold downward≥90°
Back board Fold upward≥75° Fold downward≥5°
Leg board Fold downward≥90°
Waist board elevation: 100mm
1.Imported Y type sealing ring
2.Base is metalized cold-plate
3.All movements are manipulated from the head
Width: 480±20mm
height:（750—950）mm ±50mm
Trendelenburg/Rev-Trend:20°
leftward≥20° rightward≥20°
Head board Fold upward≥30° Fold downward≥90°
Back board Fold upward≥75° Fold downward≥5°
Leg board Fold downward≥90°
Waist board elevation: 100mm
1.Imported Y type sealing ring
2.Base is metalized cold-plate
3.All movements are manipulated from the head
Product category: Patient beds and nursing beds
Multifunctional operation table (manual&head control) 3008A
length: 2050±50mm
Width: 480±20mm
height:（750—950）mm ±50mm
Trendelenburg/Rev-Trend:20°
leftward≥20° rightward≥20°
Head board Fold upward≥30° Fold downward≥90°
Back board Fold upward≥75° Fold downward≥5°
Leg board Fold downward≥90°
Waist board elevation: 100mm
1.Imported Y type sealing ring
2.Base and column are made of high quality 304 stainless steel
Width: 480±20mm
height:（750—950）mm ±50mm
Trendelenburg/Rev-Trend:20°
leftward≥20° rightward≥20°
Head board Fold upward≥30° Fold downward≥90°
Back board Fold upward≥75° Fold downward≥5°
Leg board Fold downward≥90°
Waist board elevation: 100mm
1.Imported Y type sealing ring
2.Base and column are made of high quality 304 stainless steel
Product category: Laboratory equipment
Laboratory 3.5 inch EcoStir Economical hot plate magnetic stirrer Factory price digital magnetic hotplate stirrer
Laboratory 3.5 inch EcoStir Economical hot plate magnetic stirrer Factory price digital magnetic hotplate stirrer
Product Description
Product Description:
·
• Maintenance freebrushless DC motor
• Rare earth magnets give powerful stirring
• Stepless speed regulation 300-2000rpm
• Ultra silence and vibration-free design.
• PET top provides excellent chemical resistance
• Shaft can be fitted with a PH sensor or sensors for other purposes
Packaging & Shipping:
1set/ctn, ctn size:15*14.5*5cm,0.3kg
Product Description
Product Description:
·
• Maintenance freebrushless DC motor
• Rare earth magnets give powerful stirring
• Stepless speed regulation 300-2000rpm
• Ultra silence and vibration-free design.
• PET top provides excellent chemical resistance
• Shaft can be fitted with a PH sensor or sensors for other purposes
Packaging & Shipping:
1set/ctn, ctn size:15*14.5*5cm,0.3kg
Product category: Laboratory equipment
Hot sale CT-3180 3-part differential Fully Automatic Hematology analyzer with factory price
CT-3180 Fully Automatic Hematology analyzer
Product Description:
3-part differential hematology analyzer: 18 parameters + 3 histograms
2 counting modes : whole blood and prediluted
Touch sensitive screen large of 7.0 inch
Simple and user-friendly operation software; theoretically, the end-user can learn how to operate on it within 30 minutes
Convivial and modern design; besides, its quite compact with two-chambers (its throughput is 60 tests per hour)
Low operational cost per test(less than 0.10 USD) sinceits consumption per test is only 25mL of Diluent and 0.6mL of Lyse (with 20uL of whole blood)
100% reliable with excellent CV for PLT, WBC, RBC & HGB and very low incidence rate
Packaging & Shipping:
1set/ Ctn,Ctn size:51*36*42cm, 22.5/21.5kg.
Product Description:
3-part differential hematology analyzer: 18 parameters + 3 histograms
2 counting modes : whole blood and prediluted
Touch sensitive screen large of 7.0 inch
Simple and user-friendly operation software; theoretically, the end-user can learn how to operate on it within 30 minutes
Convivial and modern design; besides, its quite compact with two-chambers (its throughput is 60 tests per hour)
Low operational cost per test(less than 0.10 USD) sinceits consumption per test is only 25mL of Diluent and 0.6mL of Lyse (with 20uL of whole blood)
100% reliable with excellent CV for PLT, WBC, RBC & HGB and very low incidence rate
Packaging & Shipping:
1set/ Ctn,Ctn size:51*36*42cm, 22.5/21.5kg.
Product category: Laboratory equipment
Factory price Cheapest N-800M Trinocular Biological Microscope
N-800M Biological Microscope
Product Description:
·
With Infinite Optical System, Kohler Illumination, Providing Excellent Optical Quality and making Image Perfect.
·
With Low and Forward Position Coaxial Focus System, Focusing Knobs and Brightness Adjustable Knob within reaching Location, Stable Integral Structure, Reasonable Ergonomic Design, Making.
·
Operator Feel More Comfortable and Effective.
Packaging & Shipping:
1set/ctn, ctn size:43*38*60cm,14/11kg
Product Description:
·
With Infinite Optical System, Kohler Illumination, Providing Excellent Optical Quality and making Image Perfect.
·
With Low and Forward Position Coaxial Focus System, Focusing Knobs and Brightness Adjustable Knob within reaching Location, Stable Integral Structure, Reasonable Ergonomic Design, Making.
·
Operator Feel More Comfortable and Effective.
Packaging & Shipping:
1set/ctn, ctn size:43*38*60cm,14/11kg
Product category: Laboratory equipment
SK-D1807-E Shaker
• Three-dimensional rocking motion with the angle of 7°
• Max. load capacity is 3kg with platform
• Speed range of 0-80rpm
• Wide range of platforms for use with a variety of vessels
Specifications
SK-D1807-E
Tilt angle
7°
Max. load capacity (with platform)
3kg
Motor type
DC motor
Motor input power
16W
Motor output power
10W
Speed range
0-80rpm
Speed display
scale
Voltage
100-240V, 50/60Hz
Power
20W
Weight
2.7kg
Permissible ambient temperature and humidity
5-40°C 80%RH
Dimension[W×D×H]
270×330×130mm
Protection class
IP21
• Max. load capacity is 3kg with platform
• Speed range of 0-80rpm
• Wide range of platforms for use with a variety of vessels
Specifications
SK-D1807-E
Tilt angle
7°
Max. load capacity (with platform)
3kg
Motor type
DC motor
Motor input power
16W
Motor output power
10W
Speed range
0-80rpm
Speed display
scale
Voltage
100-240V, 50/60Hz
Power
20W
Weight
2.7kg
Permissible ambient temperature and humidity
5-40°C 80%RH
Dimension[W×D×H]
270×330×130mm
Protection class
IP21
Product category: Laboratory equipment
Factory price binocular polarizing microscope xp-213 cheapest laboratory polarizing microscope
Polarizing Microscope XP-213
Product Description:
·
Polarizing microscope for normal inspection and education. Widely used in crystallography, Analytical chemistry, Medicine, Biology, Environmentalology, Pharmacy, Toxicologyand so on.
Supply sharp and clear images by single polarization, othorgonal polarization or conoscopic observation.
Packaging & Shipping:
1set/ctn, ctn size:42*42*34cm,9kg
Product Description:
·
Polarizing microscope for normal inspection and education. Widely used in crystallography, Analytical chemistry, Medicine, Biology, Environmentalology, Pharmacy, Toxicologyand so on.
Supply sharp and clear images by single polarization, othorgonal polarization or conoscopic observation.
Packaging & Shipping:
1set/ctn, ctn size:42*42*34cm,9kg
Product category: Laboratory equipment
Dragob Lab Brand Levo Plus Pipette Filler with 0.1-100ml Glass or Plastic Pipette
1) Appropriate for most of the plastic and glass pipettes from 0.1-100ml
2) Eight speeds of selection for aspiration and dispensing
3)Large LCD display showing low battery warning and speed settings
4) Enabling single-handed operation with minimum effort
5)Light and ergonomic design providing easy usability
6)High capacity Li-ion battery enable long runtime of operation
7)Low battery indication
8)Powerful motor fills a 25mL pipette in<5 seconds
10)0.45μm replaceable Hydrophobic filter
11)Rechargeable during use
2) Eight speeds of selection for aspiration and dispensing
3)Large LCD display showing low battery warning and speed settings
4) Enabling single-handed operation with minimum effort
5)Light and ergonomic design providing easy usability
6)High capacity Li-ion battery enable long runtime of operation
7)Low battery indication
8)Powerful motor fills a 25mL pipette in<5 seconds
10)0.45μm replaceable Hydrophobic filter
11)Rechargeable during use
Product category: Laboratory equipment
TD5A - WS centrifuge table low speed specification
Summary:
Centrifugal separation technology is based on particle in a practical centrifugal occasion of the state and of the development of new technology. Different density, size and shape of the particles in different centrifugal occasions settlement, so a general is spherical non-uniform mixture, can use the centrifugal method to separation, centrifuge is in order to further research on biological chemistry, separation large amounts of material. For example collecting cells, separation plasma, from these preliminary the purified preparation from DNA and protein molecules, and can isolate viruses and large-scale escherichia coli, yan components of cells, nucleoprotein particles, etc.
The machine adopts brushless motor, microcomputer control, with RCF automatic computing and setting. Equipped with a variety of program protection, easy operation free maintenance etc.
Main technical parameters:
1. Use power supply: ac 220 v ± 10 v 50 hz
2. The machine power:750 w
3. Turn speed: 500-5000 revolutions per minute ± 50 RPM adjustable digital display
4. Centrifugal capacity:48 X 10 ml 40 X 10 ml 8 X50m l4X100m l4 X250ml
5: relative centrifugal force: 4160 xg digital display
6: outlook size: 500 x 400 x 360 (mm)
7: fixed: 1-99 minutes digital display
8: heavy quantity: 48 kg
9:65 db noise acuities when maximum speed
Centrifugal separation technology is based on particle in a practical centrifugal occasion of the state and of the development of new technology. Different density, size and shape of the particles in different centrifugal occasions settlement, so a general is spherical non-uniform mixture, can use the centrifugal method to separation, centrifuge is in order to further research on biological chemistry, separation large amounts of material. For example collecting cells, separation plasma, from these preliminary the purified preparation from DNA and protein molecules, and can isolate viruses and large-scale escherichia coli, yan components of cells, nucleoprotein particles, etc.
The machine adopts brushless motor, microcomputer control, with RCF automatic computing and setting. Equipped with a variety of program protection, easy operation free maintenance etc.
Main technical parameters:
1. Use power supply: ac 220 v ± 10 v 50 hz
2. The machine power:750 w
3. Turn speed: 500-5000 revolutions per minute ± 50 RPM adjustable digital display
4. Centrifugal capacity:48 X 10 ml 40 X 10 ml 8 X50m l4X100m l4 X250ml
5: relative centrifugal force: 4160 xg digital display
6: outlook size: 500 x 400 x 360 (mm)
7: fixed: 1-99 minutes digital display
8: heavy quantity: 48 kg
9:65 db noise acuities when maximum speed
Product category: Laboratory equipment
TDZ5A-WS desktop low speed centrifuge instructions
Summary:
Centrifugal separation technology is based on particle in a practical centrifugal occasions and developed to the state of the new technology. Different density, size or shape particles in different occasions centrifugal sedimentation, so a roughly spherical is not uniform mixture, can use the method of centrifugal are isolated, centrifuge is to further research on biological chemistry, separate a lot of material. For example collect cells, separating the plasma, from these the purification of separation in preparations DNA and protein molecules, and can be isolated the virus and massive escherichia coli, strict cell components, such as the ribonucleoprotein complex particle.
The machine adopts brushless motor, the microcomputer control, with RCF automatic computing and setting. With a variety of program protection, easy operation etc.
Safety control: the lid lock system in the operation;
In the unbalanced rotating automatic braking system;
Automatic door opened the switch at the end of the operation
Main technical parameters:
1. Use power supply: ac 220 V ± 10 V frequency 50 HZ
2. The whole machine power: 250 W
3. Turn speed: 0-6000 RPM ± 50 turn/points digital display
4. Centrifugal capacity: 12by 15 ml (5000 RPM)
5: relative centrifugal force: 3500 xg
6: envelop dimensions:400 x 360 x 280 (mm)
7: set when: 1-99 minutes digital display
8: heavy quantity: 15 kg
9: more than 65 db noise maximum speed
Centrifugal separation technology is based on particle in a practical centrifugal occasions and developed to the state of the new technology. Different density, size or shape particles in different occasions centrifugal sedimentation, so a roughly spherical is not uniform mixture, can use the method of centrifugal are isolated, centrifuge is to further research on biological chemistry, separate a lot of material. For example collect cells, separating the plasma, from these the purification of separation in preparations DNA and protein molecules, and can be isolated the virus and massive escherichia coli, strict cell components, such as the ribonucleoprotein complex particle.
The machine adopts brushless motor, the microcomputer control, with RCF automatic computing and setting. With a variety of program protection, easy operation etc.
Safety control: the lid lock system in the operation;
In the unbalanced rotating automatic braking system;
Automatic door opened the switch at the end of the operation
Main technical parameters:
1. Use power supply: ac 220 V ± 10 V frequency 50 HZ
2. The whole machine power: 250 W
3. Turn speed: 0-6000 RPM ± 50 turn/points digital display
4. Centrifugal capacity: 12by 15 ml (5000 RPM)
5: relative centrifugal force: 3500 xg
6: envelop dimensions:400 x 360 x 280 (mm)
7: set when: 1-99 minutes digital display
8: heavy quantity: 15 kg
9: more than 65 db noise maximum speed
Product category: Laboratory equipment
LCB Clean bench( Horizontal Type)
Features：
☆ Horizontal type, stainless steel board, easy to clean.
☆ Large LCD screen to display air flow, working time, pressure difference, working status, etc.
☆ High efficient ironclad centrifugal fan with the features of stable work and low noise.
☆ Spring-type sliding door, can be positioned freely within the specified range.
☆ Horizontal type, stainless steel board, easy to clean.
☆ Large LCD screen to display air flow, working time, pressure difference, working status, etc.
☆ High efficient ironclad centrifugal fan with the features of stable work and low noise.
☆ Spring-type sliding door, can be positioned freely within the specified range.
Product category: Laboratory equipment
SK-L180-E Shaker
Max. load capacity is 3kg with platform
• Speed range of 0-200 rpm
• Wide range of platforms for use with a variety of vessels
Specifications
SK-L180-E
Amplitude
20mm
Max. load capacity (with platform)
3kg
Motor type
DC motor
Motor input power
16W
Motor output power
10W
Power
20W
Time settings range
1min-19h59min
Speed range
scale
Voltage
100-240V, 50/60Hz
Protection class
IP21
Dimension [W x D x H]
270×330×110mm
Weight
3.1kg
Permissible ambient temperature and humidity
5-40°C 80%RH
• Speed range of 0-200 rpm
• Wide range of platforms for use with a variety of vessels
Specifications
SK-L180-E
Amplitude
20mm
Max. load capacity (with platform)
3kg
Motor type
DC motor
Motor input power
16W
Motor output power
10W
Power
20W
Time settings range
1min-19h59min
Speed range
scale
Voltage
100-240V, 50/60Hz
Protection class
IP21
Dimension [W x D x H]
270×330×110mm
Weight
3.1kg
Permissible ambient temperature and humidity
5-40°C 80%RH
Product category: Laboratory equipment
SK-L180-Pro Shaker
• Max. load capacity is 7.5kg(L330) and 2.5kg(L180) with platform
• Double LCDs for independent display of time and speed
• Wide range of platforms for use with a variety of vessels
• Maintenance- free brushless DC motor
• Over speed detection and protection
Specifications
SK-L180-Pro
Amplitude
4mm
Max. load capacity (with platform)
2.5kg
Motor type
Brushless DC motor
Motor input power
28W
Motor output power
15W
Power
30W
Time settings range
1min-19h59min
Speed range
100-350rpm
Speed display
LCD
Timer display
LCD
Voltage
100-240V, 50/60Hz
Protection class
IP21
Dimension [W x D x H]
300×340×100mm
Weight
8.1kg
Permissible ambient temperature and humidity
5-40°C 80%RH
Data connector
RS232
• Double LCDs for independent display of time and speed
• Wide range of platforms for use with a variety of vessels
• Maintenance- free brushless DC motor
• Over speed detection and protection
Specifications
SK-L180-Pro
Amplitude
4mm
Max. load capacity (with platform)
2.5kg
Motor type
Brushless DC motor
Motor input power
28W
Motor output power
15W
Power
30W
Time settings range
1min-19h59min
Speed range
100-350rpm
Speed display
LCD
Timer display
LCD
Voltage
100-240V, 50/60Hz
Protection class
IP21
Dimension [W x D x H]
300×340×100mm
Weight
8.1kg
Permissible ambient temperature and humidity
5-40°C 80%RH
Data connector
RS232
Product category: Laboratory equipment
SK-L180-S Shaker
• Max. load capacity is 3kg with platform
• Double LEDs for independent display of time and speed
• Speed range of 40-200 rpm
• Wide range of platforms for use with a variety of vessels
Specifications
SK-L180-S
Amplitude
20mm
Max. load capacity (with platform)
3kg
Motor type
DC motor
Motor input power
16W
Motor output power
10W
Power
20W
Time settings range
1min-19h59min
Speed range
40-200rpm
Speed display
LED
Timer display
LED
Voltage
100-240V, 50/60Hz
Protection class
IP21
Dimension [W x D x H]
270×330×110mm
Weight
3.1kg
Permissible ambient temperature and humidity
5-40°C 80%RH
• Double LEDs for independent display of time and speed
• Speed range of 40-200 rpm
• Wide range of platforms for use with a variety of vessels
Specifications
SK-L180-S
Amplitude
20mm
Max. load capacity (with platform)
3kg
Motor type
DC motor
Motor input power
16W
Motor output power
10W
Power
20W
Time settings range
1min-19h59min
Speed range
40-200rpm
Speed display
LED
Timer display
LED
Voltage
100-240V, 50/60Hz
Protection class
IP21
Dimension [W x D x H]
270×330×110mm
Weight
3.1kg
Permissible ambient temperature and humidity
5-40°C 80%RH
Product category: Laboratory equipment
SK-L330-Pro Shaker
· Max. load capacity is 7.5kg(L330) and 2.5kg(L180) with platform.
· Double LCDs for independent display of time and speed.
· Wide range of platforms for use with a variety of vessels.
· Maintenance- free brushless DC motor.
· Over speed detection and protection.
Specifications
SK-L330-Pro
Amplitude
10mm
Max. load capacity (with platform)
7.5kg
Motor type
Brushless DC motor
Motor input power
28W
Motor output power
15W
Power
30W
Time settings range
1min-19h59min
Speed range
100-350rpm
Speed display
LCD
Timer display
LCD
Voltage
100-240V, 50/60Hz
Protection class
IP21
Dimension [W x D x H]
370×420×100mm
Weight
13.5kg
Permissible ambient temperature and humidity
5-40°C 80%RH
Data connector
RS232
· Double LCDs for independent display of time and speed.
· Wide range of platforms for use with a variety of vessels.
· Maintenance- free brushless DC motor.
· Over speed detection and protection.
Specifications
SK-L330-Pro
Amplitude
10mm
Max. load capacity (with platform)
7.5kg
Motor type
Brushless DC motor
Motor input power
28W
Motor output power
15W
Power
30W
Time settings range
1min-19h59min
Speed range
100-350rpm
Speed display
LCD
Timer display
LCD
Voltage
100-240V, 50/60Hz
Protection class
IP21
Dimension [W x D x H]
370×420×100mm
Weight
13.5kg
Permissible ambient temperature and humidity
5-40°C 80%RH
Data connector
RS232
Product category: Laboratory equipment
SK-O180-E Shaker
• Max. load capacity is 3kg with platform
• Speed range of 0-200rpm
• Wide range of platforms for use with a variety of vessels
Specifications
SK-O180-E
Orbital diameter
20mm
Max. load capacity (with platform)
3kg
Motor type
DC motor
Motor input power
16W
Motor output power
10W
Power
20W
Speed range
0-200rpm
Speed display
scale
Voltage
100-240V,50/60Hz
Protection class
IP21
Dimension [W x D x H]
370×420×100mm
Weight
3.1kg
Permissible ambient temperature and humidity
5-40°C 80%RH
• Speed range of 0-200rpm
• Wide range of platforms for use with a variety of vessels
Specifications
SK-O180-E
Orbital diameter
20mm
Max. load capacity (with platform)
3kg
Motor type
DC motor
Motor input power
16W
Motor output power
10W
Power
20W
Speed range
0-200rpm
Speed display
scale
Voltage
100-240V,50/60Hz
Protection class
IP21
Dimension [W x D x H]
370×420×100mm
Weight
3.1kg
Permissible ambient temperature and humidity
5-40°C 80%RH
Product category: Laboratory equipment
LCD 4-Channel Digital Magnetic Hotplate Stirrer
Features
• Independent heating and stirring
control
• LCD display shows actual temperatures
and speed
• PID controller ensures a precise
and steady heating process, Max.
temperature up to 340℃
• Brushless DC motor enables more
powerful speed control
• External temperature sensor(PT1000)
with accuracy at 0.2℃
• Overheating protection temperature at
420℃
• Stainless steel work plate with ceramic
coating provides good chemicalresistant performance
• A wide variety of accessories are
available
• Independent heating and stirring
control
• LCD display shows actual temperatures
and speed
• PID controller ensures a precise
and steady heating process, Max.
temperature up to 340℃
• Brushless DC motor enables more
powerful speed control
• External temperature sensor(PT1000)
with accuracy at 0.2℃
• Overheating protection temperature at
420℃
• Stainless steel work plate with ceramic
coating provides good chemicalresistant performance
• A wide variety of accessories are
available
Product category: Laboratory equipment
Alloy-Bead Heating Bath
• High strength aluminum alloy bead with high
thermal conductivity over wide temperature
range
• Flexible, convenient, easy to operate and
adaptable to reaction vessels with different
shapes and sizes
• Accommodate the external temperature
probe on the hotplate magnetic stirrer to
achieve precise temperature control
• The alloy bead does not adhere to the
container inside surface, while the silicone oil
is difficult to clean in the oil bath application
• Eco-friendly, pollution free, poison free, fume
free, highly safe and splash free heating
• PTFE shell can effectively retain the heat and
ensure human safety from burning injuries
• The beads are easy to handle with. The
contaminated portion can be cleaned and
replaced separately
thermal conductivity over wide temperature
range
• Flexible, convenient, easy to operate and
adaptable to reaction vessels with different
shapes and sizes
• Accommodate the external temperature
probe on the hotplate magnetic stirrer to
achieve precise temperature control
• The alloy bead does not adhere to the
container inside surface, while the silicone oil
is difficult to clean in the oil bath application
• Eco-friendly, pollution free, poison free, fume
free, highly safe and splash free heating
• PTFE shell can effectively retain the heat and
ensure human safety from burning injuries
• The beads are easy to handle with. The
contaminated portion can be cleaned and
replaced separately
Product category: Laboratory equipment
SK-O180-S Shaker
• Max.load capacity is 3kg with platform
• Double LEDs for independent display of time and speed
• Speed range of 40-200rpm
• Wide range of platforms for use with a variety of vessels
Specifications
SK-O180-S
Orbital diameter
20mm
Max. load capacity (with platform)
3kg
Motor type
DC motor
Motor input power
16W
Motor output power
10W
Power
20W
Time settings range
1min-19h59min
Speed range
40-200rpm
Speed display
LED
Timer display
LED
Voltage
100-240V,50/60Hz
Protection class
IP21
Dimension [W x D x H]
370×420×100mm
Weight
3.1kg
Permissible ambient temperature and humidity
5-40°C 80%RH
• Double LEDs for independent display of time and speed
• Speed range of 40-200rpm
• Wide range of platforms for use with a variety of vessels
Specifications
SK-O180-S
Orbital diameter
20mm
Max. load capacity (with platform)
3kg
Motor type
DC motor
Motor input power
16W
Motor output power
10W
Power
20W
Time settings range
1min-19h59min
Speed range
40-200rpm
Speed display
LED
Timer display
LED
Voltage
100-240V,50/60Hz
Protection class
IP21
Dimension [W x D x H]
370×420×100mm
Weight
3.1kg
Permissible ambient temperature and humidity
5-40°C 80%RH
Product category: Laboratory equipment
LED Hotplate
Features
• LED screen shows temperature
• Max. temperature up to 550°C
• Separate safety circuits with fixed safety temperature of 580°C
• External temperature control is possible by connecting the
temperature sensor(PT 1000) with an accuracy at ±0.5°C
• Glass ceramic work plate provides excellent chemical-resistant
performance and most efficient heat transfer
• The “HOT” warning will flash if the work plate temperature is
above 50°C even when the hotplate is turned off
• LED screen shows temperature
• Max. temperature up to 550°C
• Separate safety circuits with fixed safety temperature of 580°C
• External temperature control is possible by connecting the
temperature sensor(PT 1000) with an accuracy at ±0.5°C
• Glass ceramic work plate provides excellent chemical-resistant
performance and most efficient heat transfer
• The “HOT” warning will flash if the work plate temperature is
above 50°C even when the hotplate is turned off
Product category: Laboratory equipment
SK-O330-Pro Sharker
• Max. load capacity is 7.5kg(O330) and 2.5kg(O180) with platform
• Double LCDs for independent display of time and speed
• Used with a wide variety of accessories
• Maintenance- free brushless DC motor
• Over speed detection and protection
• Remote function provides PC control and data transmission
Specifications
SK-O330-Pro
Orbital diameter
10mm
Max. load capacity (with platform)
7.5kg
Motor type
Brushless DC motor
Motor input power
28W
Motor output power
15W
Power
30W
Time settings range
1min-19h59min
Speed range
100-500rpm
Speed display
LCD
Timer display
LCD
Voltage
100-240V,50/60Hz
Protection class
IP21
Dimension [W x D x H]
370×420×100mm
Weight
13.5kg
Permissible ambient temperature and humidity
5-40°C 80%RH
Data connector
RS232
• Double LCDs for independent display of time and speed
• Used with a wide variety of accessories
• Maintenance- free brushless DC motor
• Over speed detection and protection
• Remote function provides PC control and data transmission
Specifications
SK-O330-Pro
Orbital diameter
10mm
Max. load capacity (with platform)
7.5kg
Motor type
Brushless DC motor
Motor input power
28W
Motor output power
15W
Power
30W
Time settings range
1min-19h59min
Speed range
100-500rpm
Speed display
LCD
Timer display
LCD
Voltage
100-240V,50/60Hz
Protection class
IP21
Dimension [W x D x H]
370×420×100mm
Weight
13.5kg
Permissible ambient temperature and humidity
5-40°C 80%RH
Data connector
RS232
Product category: Laboratory equipment
SK-R330-Pro Shaker
• Rocking motion angle 9°
• Max. load capacity is 10kg with platform
• Speed range of 10-70rpm
• Double LCDs for independent display of time and speed
• Wide range of platforms for use with a variety of vessels
Specifications
SK-R330-Pro
Tilt angle
9°
Max. load capacity (with platform)
10kg
Motor type
DC motor
Motor input power
40W
Motor output power
24W
Speed range
10-70rpm
Speed display
LCD
Timer display
LCD
Time settings range
1min-19h59min
Voltage
100-240V, 50/60Hz
Power
50W
Weight
9kg
Permissible ambient temperature and humidity
5-40°C 80%RH
Dimension[W×D×H]
360×410×200mm
Protection class
IP21
• Max. load capacity is 10kg with platform
• Speed range of 10-70rpm
• Double LCDs for independent display of time and speed
• Wide range of platforms for use with a variety of vessels
Specifications
SK-R330-Pro
Tilt angle
9°
Max. load capacity (with platform)
10kg
Motor type
DC motor
Motor input power
40W
Motor output power
24W
Speed range
10-70rpm
Speed display
LCD
Timer display
LCD
Time settings range
1min-19h59min
Voltage
100-240V, 50/60Hz
Power
50W
Weight
9kg
Permissible ambient temperature and humidity
5-40°C 80%RH
Dimension[W×D×H]
360×410×200mm
Protection class
IP21
Product category: Laboratory equipment
SK-R1807-E Shaker
• Rocking motion angle 7°
• Max. load capacity is 3kg with platform
• Speed range of 0-80rpm
• Wide range of platforms for use with a variety of vessels
Specifications
SK-R1807-E
Tilt angle
7°
Max. load capacity (with platform)
3kg
Motor type
DC motor
Motor input power
16W
Motor output power
10W
Speed range
0-80rpm
Voltage
100-240V, 50/60Hz
Power
20W
Weight
3.2kg
Permissible ambient temperature and humidity
5-40°C 80%RH
Dimension[W×D×H]
270×330×130mm
Protection class
IP21
• Max. load capacity is 3kg with platform
• Speed range of 0-80rpm
• Wide range of platforms for use with a variety of vessels
Specifications
SK-R1807-E
Tilt angle
7°
Max. load capacity (with platform)
3kg
Motor type
DC motor
Motor input power
16W
Motor output power
10W
Speed range
0-80rpm
Voltage
100-240V, 50/60Hz
Power
20W
Weight
3.2kg
Permissible ambient temperature and humidity
5-40°C 80%RH
Dimension[W×D×H]
270×330×130mm
Protection class
IP21
Product category: Disposable articles for hospitals
Butterfly Blood Collection Needle
Description:
Used to collect blood for testing, usually used together with vacuum tube.
It provide fast and convenient blood multiple sampling by single puncture.
High quality ultra-sharp needle assure atraumatic insertion and painless penetration.
Color-coded cap and hub assure accurate and convenient gauge size indentification.
Safety sleeve for this model is available to protect sampling person from accidental hurt or cross-infection.
Size:20G,21G,22G,23G,25G
Used to collect blood for testing, usually used together with vacuum tube.
It provide fast and convenient blood multiple sampling by single puncture.
High quality ultra-sharp needle assure atraumatic insertion and painless penetration.
Color-coded cap and hub assure accurate and convenient gauge size indentification.
Safety sleeve for this model is available to protect sampling person from accidental hurt or cross-infection.
Size:20G,21G,22G,23G,25G
Product category: Disposable articles for hospitals
Examination Disposable Nitrile Gloves
Material: 100% nitrile
Style: Powder Free
Size: S, M, L
Weight: 3g, 3.5g, 4g or customized
Application: Food industry, Chemical industry, Electron industry, etc.
Delivery: 25-45 days
Packaging: 100pcs per bo0 boxes per carton or customized.
Certification: CE, ISO13485, FDA
Style: Powder Free
Size: S, M, L
Weight: 3g, 3.5g, 4g or customized
Application: Food industry, Chemical industry, Electron industry, etc.
Delivery: 25-45 days
Packaging: 100pcs per bo0 boxes per carton or customized.
Certification: CE, ISO13485, FDA
Product category: Disposable articles for hospitals
Digital Infrared Thermometer
Instant reading, quick measurement, get reading in 1 second
Adopt the latest algorithm with optimised temperature calibration function
Accurate and reliable ±0.2℃ high accuracy
Tri-color indicator light, display green, orange & red with fever alarm function
Memory function, memory recall of 10 reading
Multi-function design, can measure forehead /ear, room, object temperature
Switching between mute and un-mute
Display Resolution: ℃ or ℉
Range: 10℃-40℃ (50℉-104℃)
Storage: -25℃-55℃
Weight: 84grams (with batteries)
Expected service life: Three years
Adopt the latest algorithm with optimised temperature calibration function
Accurate and reliable ±0.2℃ high accuracy
Tri-color indicator light, display green, orange & red with fever alarm function
Memory function, memory recall of 10 reading
Multi-function design, can measure forehead /ear, room, object temperature
Switching between mute and un-mute
Display Resolution: ℃ or ℉
Range: 10℃-40℃ (50℉-104℃)
Storage: -25℃-55℃
Weight: 84grams (with batteries)
Expected service life: Three years
Product category: Laboratory equipment
THERMOSTIC & HUMIDITY INCUBATOR
◆Microprocessor control, over temperature alarm ◆Stainless steel interior ◆Digital display setting and actual temperature ◆Digital display running timer, PID self-tuning ◆Automatic alarm after operation ◆Suitable for constant temperature tests ◆With humidifier ◆Suitable for various microbial cultivation and
incubation ◆ Optical printer function
incubation ◆ Optical printer function
Product category: Laboratory equipment
VACUUM DRY OVEN
◆Microprocessor control,
◆With glass window door, ◆Digital display setting and actual temperature ◆Digital display running timer ◆PID self-tuning, over temperature alarm
◆Automatic alarm after operation ◆Suitable for drying, baking, dewaxing, sterilization, heat treatment under vacuum conditions ◆DZF-6090/6210 with vaccum pump
◆With glass window door, ◆Digital display setting and actual temperature ◆Digital display running timer ◆PID self-tuning, over temperature alarm
◆Automatic alarm after operation ◆Suitable for drying, baking, dewaxing, sterilization, heat treatment under vacuum conditions ◆DZF-6090/6210 with vaccum pump
Product category: Laboratory equipment
211B SHAKING INCUBATOR
◆Three-dimensional self-balancing eccentric drive mechanism ◆Black and white pen section of liquid crystal display ◆Brushless motor control, long service life ◆Temperature is controlled by Microcomputer controlling ◆Temperature overshoot, faster stabilization time, better control precision etc.. ◆Speed of the brushless motor control with high reliability ◆With module fault, motor stall, Holzer wrong, bus voltage undervoltage, overvoltage, communication
fault alarm function. ◆Optional RS485 communication
fault alarm function. ◆Optional RS485 communication
Product category: Disposable articles for hospitals
Adjustable Pediatric Philadelphia The Collars
Description:
1.Available in X-ray,CT procedure.
2.Special PE
3.Easy to clean
4.white and blue color
Features:
1.Neck collar is designed to use in a wide range of patients;
2.The size is designed for all kinds of patients;
3.Using adjustment allows for universal height;
4.Keep clean for reuse, prevent bacterial growth on it.
Material: Superior Foam, environmental protection material, non-toxic
Type: First Aid device
Color: Blue & white or custom color
Size: S/M/L
Weight: 0.5kg
1.Available in X-ray,CT procedure.
2.Special PE
3.Easy to clean
4.white and blue color
Features:
1.Neck collar is designed to use in a wide range of patients;
2.The size is designed for all kinds of patients;
3.Using adjustment allows for universal height;
4.Keep clean for reuse, prevent bacterial growth on it.
Material: Superior Foam, environmental protection material, non-toxic
Type: First Aid device
Color: Blue & white or custom color
Size: S/M/L
Weight: 0.5kg
Product category: Disposable articles for hospitals
Sterile Paraffin Gauze Dressing
Indications:
1. Scratch and wound
2. Second degree burns and skin graft
3. Unplug fingernail operation
4. Postoperative wound
5. Chronic Wound: Bedsore, leg ulcer, diabetic footer ulcer and etc.
Advantages:
1.Not to adhere to the wound, remove without pain, No Blood.
2. Accelerate the healing under an appropriate moisture environment
3. Convenient to used, No greasy feeling
4.Soft and Comfortable to use. Especially use on hands, feet, limbs and other parts which are difficult to fix
Material: Cotton, Paraffin
Color: White
Size: 5*5cm, 10cm*10cm or customized
Sterilization Method: Gamma radiation
Usage: Burns wound care
1. Scratch and wound
2. Second degree burns and skin graft
3. Unplug fingernail operation
4. Postoperative wound
5. Chronic Wound: Bedsore, leg ulcer, diabetic footer ulcer and etc.
Advantages:
1.Not to adhere to the wound, remove without pain, No Blood.
2. Accelerate the healing under an appropriate moisture environment
3. Convenient to used, No greasy feeling
4.Soft and Comfortable to use. Especially use on hands, feet, limbs and other parts which are difficult to fix
Material: Cotton, Paraffin
Color: White
Size: 5*5cm, 10cm*10cm or customized
Sterilization Method: Gamma radiation
Usage: Burns wound care
Product category: Laboratory equipment
AUTOMATIC STEEL STERILIZER
◆Hand wheel type of quick-open door structure ◆Mechanical safety interlocking device ◆Computer control auto recycle sterilization ◆LED screen indicate working state ◆Temperature scope 50℃-126℃ ◆Time scope 0-9999min ◆Overpressure auto-discharging 0.145-0.165Mpa ◆Automatic shut down with beep reminding after sterilization ◆Fully stainless steel
Product category: Disposable articles for hospitals
Personal Protection Coverall With Hood
Fabric: Polypropylene + polyethylene film, 65g/m2
Color: White
Size: S, M, L, XL, XXL, XXXL
Application: Personal protection
Feature: Sealing, waterproof
Way of dressing
Make sure that the size corresponds with the user. Do not make any modifications on product.
Check that the product has no defect and is in good condition (no holes, unsewn parts, etc.)
Open the zip, dress up taking care not to break the material. Close the zip and sealed the flap. Make the adhesive stripe attaches to the coverall without folding. In case of airborne solid particulates it is advisable to cover and tape the zipper and to wrap the cuffs and ankles with adhesive tape.
The protection characteristics are valid only if the item is correctly dressed and closed
Color: White
Size: S, M, L, XL, XXL, XXXL
Application: Personal protection
Feature: Sealing, waterproof
Way of dressing
Make sure that the size corresponds with the user. Do not make any modifications on product.
Check that the product has no defect and is in good condition (no holes, unsewn parts, etc.)
Open the zip, dress up taking care not to break the material. Close the zip and sealed the flap. Make the adhesive stripe attaches to the coverall without folding. In case of airborne solid particulates it is advisable to cover and tape the zipper and to wrap the cuffs and ankles with adhesive tape.
The protection characteristics are valid only if the item is correctly dressed and closed
Product category: Disposable articles for hospitals
Full Face Protection Shield Mask
Material: PET/PVC
Sponge: Foamed resin / wood cellulose fiber
Button: ABS
Rope: Nylon elastic band
Size: 290*250*25mm
Feature:
1. Double-sided anti-fog
2. Anti-dizziness
3. Safe and light, easy to carry
4. High temperature resistance, impact resistance
Precautions: Before use, please remove the transparent protective film on both sides of the lens. Don't wipe directly.
Application Range: Used in laboratories, hospital, chemical plants, domestic and public places, etc.
Sponge: Foamed resin / wood cellulose fiber
Button: ABS
Rope: Nylon elastic band
Size: 290*250*25mm
Feature:
1. Double-sided anti-fog
2. Anti-dizziness
3. Safe and light, easy to carry
4. High temperature resistance, impact resistance
Precautions: Before use, please remove the transparent protective film on both sides of the lens. Don't wipe directly.
Application Range: Used in laboratories, hospital, chemical plants, domestic and public places, etc.
Product category: Laboratory equipment
Vacuum Aspiration Systems
Features
• Vacuum power with adjustable aspiration
rate to achieve up to 15mL/S
• Sensitive level sensor to detect when the
bottle is full preventing liquid overflow
• Fully autoclavable all system components
that contact liquid
• Easy to disassemble and clean
• Wide range of adapters fit on the handoperator for aspirating liquids from
tubes, dishes, microplates, bottles, from
single channel to 8-channel tip
• Hydrophobic filter for avoiding air
contamination or liquid overflow (this
feature is in the catalogue but it is not on
website)
• Vacuum power with adjustable aspiration
rate to achieve up to 15mL/S
• Sensitive level sensor to detect when the
bottle is full preventing liquid overflow
• Fully autoclavable all system components
that contact liquid
• Easy to disassemble and clean
• Wide range of adapters fit on the handoperator for aspirating liquids from
tubes, dishes, microplates, bottles, from
single channel to 8-channel tip
• Hydrophobic filter for avoiding air
contamination or liquid overflow (this
feature is in the catalogue but it is not on
website)
Product category: Disposable articles for hospitals
Disposable Medical Surgical Suture Thread With Needle
Style: With or without needle, with one or two needles
Material: Absorbable: Polyglycolic acid, Rapide Polyglycolic acid, Polyglactin 910, Rapide polyglactin 910, Poliglecaprone 25, Polydioxanone, Chromic catgut, Plain catgut
Non-absorbable: Silk braided, Polyester braided, Nylon, Polypropylene monofilament,Stainless steel wire
Size: 2#, 1#, 0#, 2-0, 3-0, 4-0, 5-0, 6-0, 7-0, 8-0
Thread length: 45cm,60cm ,75cm,100cm,125cm,150cm
Needle length: 6mm, 8mm, 12mm, 18mm, 22mm, 30mm,35mm,40mm, 50mm
Color: various colors due to the materials
Packaging: 12pcs/box，50boxes/carton
Carton size: 28cm*27cm*33cm
GW,NW/Ctn: 4kg,3kg
Payment terms: T/T, L/C, Western Union, Palpay
Material: Absorbable: Polyglycolic acid, Rapide Polyglycolic acid, Polyglactin 910, Rapide polyglactin 910, Poliglecaprone 25, Polydioxanone, Chromic catgut, Plain catgut
Non-absorbable: Silk braided, Polyester braided, Nylon, Polypropylene monofilament,Stainless steel wire
Size: 2#, 1#, 0#, 2-0, 3-0, 4-0, 5-0, 6-0, 7-0, 8-0
Thread length: 45cm,60cm ,75cm,100cm,125cm,150cm
Needle length: 6mm, 8mm, 12mm, 18mm, 22mm, 30mm,35mm,40mm, 50mm
Color: various colors due to the materials
Packaging: 12pcs/box，50boxes/carton
Carton size: 28cm*27cm*33cm
GW,NW/Ctn: 4kg,3kg
Payment terms: T/T, L/C, Western Union, Palpay
Product category: Laboratory equipment
Real-Time PCR System
Features
• Up to 6 fluorescence detection channels allowing multiplex PCR.
• Effectively reduce multi-color crosstalk and edge effect, no ROX
correction required to reduce sample and reagent use
• Innovative scanning method and time-resolved signal separation
technology to improve detection sensitivity
• Unique edge temperature compensation technology to minimize
"edge effect"
• User-friendly software
• Innovative technology with long-lastig LED light provides
reliability results
• Up to 6 fluorescence detection channels allowing multiplex PCR.
• Effectively reduce multi-color crosstalk and edge effect, no ROX
correction required to reduce sample and reagent use
• Innovative scanning method and time-resolved signal separation
technology to improve detection sensitivity
• Unique edge temperature compensation technology to minimize
"edge effect"
• User-friendly software
• Innovative technology with long-lastig LED light provides
reliability results
Product category: Disposable articles for hospitals
Orthopedic Plaster Of Paris Cast Bandage
Structure: wrap fixing
Material: fiberglass and polyurethane
Function: fixation of fracture and common orthopedic
Color: White Red Green Blue Pink Yellow
Material: polyurethane resin and fabric
Application: orthopedics, surgery
Size: 5*360cm,7.5*360cm,10*360cm
Feature: High hardness, light weight; Curing speed
Package: 10roll*12box,10roll*9box
Material: fiberglass and polyurethane
Function: fixation of fracture and common orthopedic
Color: White Red Green Blue Pink Yellow
Material: polyurethane resin and fabric
Application: orthopedics, surgery
Size: 5*360cm,7.5*360cm,10*360cm
Feature: High hardness, light weight; Curing speed
Package: 10roll*12box,10roll*9box
Product category: Disposable articles for hospitals
Disposable Arthroscopy Trocar
Disposable arthroscopy trocar , with different diameter and working length
1.Single use only ,avoid cross inflection ;
2.unique design, quick recovery ;
3.thread design ,transparent cannulas enable visual control at Arthroscopy surgical step
Material: ABS
Working Length: 70mm/90mm/110mm
Size: 6.5mm/8.5mm
Feature: Quick recovery, Thread design,transparent cannulas
1.Single use only ,avoid cross inflection ;
2.unique design, quick recovery ;
3.thread design ,transparent cannulas enable visual control at Arthroscopy surgical step
Material: ABS
Working Length: 70mm/90mm/110mm
Size: 6.5mm/8.5mm
Feature: Quick recovery, Thread design,transparent cannulas
Product category: Disposable articles for hospitals
Disposable Non-Woven Face Mask With Ear Loop
Description:
Face Masks 3 Ply with Ear loops
This classical style Face Masks 3 Ply with Ear
Loops with easy elastic ear loop and nose bar, 3 layer pleated design.
Color: White/Blue/Green/Yellow/Pink/Yellow
Breathable, soft lining, latex and fiberglass free
Application: Medical Care & Personal Care
Package: 50pc/box, 40boxes/carton
Size: 20+20+25g
Face Masks 3 Ply with Ear loops
This classical style Face Masks 3 Ply with Ear
Loops with easy elastic ear loop and nose bar, 3 layer pleated design.
Color: White/Blue/Green/Yellow/Pink/Yellow
Breathable, soft lining, latex and fiberglass free
Application: Medical Care & Personal Care
Package: 50pc/box, 40boxes/carton
Size: 20+20+25g
Product category: Disposable articles for hospitals
Silicone Foley Catheter With Or Without Balloon
Type: 2 way and 3 way
Material: Medical grade silicone
Size: 6Fr-26Fr
Length: 400mm
Balloon Capacity: 3-5ml/cc, 5-10ml/cc, 30ml/cc, 30-50ml/cc
Sterilization: EO
Certificate: CE ISO
Packaging: 1 pcs/pouch,10 pcs/box, 20 boxes/ctn
Feature:
1. Made of imported medical-grade silicone.
2. Perform its function safely and efficiently.
3.The cavities are made by liquid injection technology, better.
4. Length: 400mm.
5. Latex-free, safe and smooth.
6. CE and ISO: 13485 approved.
7. Symmetrical balloon expands equally in all directions
Material: Medical grade silicone
Size: 6Fr-26Fr
Length: 400mm
Balloon Capacity: 3-5ml/cc, 5-10ml/cc, 30ml/cc, 30-50ml/cc
Sterilization: EO
Certificate: CE ISO
Packaging: 1 pcs/pouch,10 pcs/box, 20 boxes/ctn
Feature:
1. Made of imported medical-grade silicone.
2. Perform its function safely and efficiently.
3.The cavities are made by liquid injection technology, better.
4. Length: 400mm.
5. Latex-free, safe and smooth.
6. CE and ISO: 13485 approved.
7. Symmetrical balloon expands equally in all directions
Product category: Disposable articles for hospitals
Medical CPR Mouth To Mouth Rescue Breathing Mask
Description:
1). CPR consist of face film and one-way filter,the face shield is made of PVC material.
2). The filter is made of PVC or non-woven cloth,All parts adopt high-quality eco-friendly material, free latex.
3). Each in a PP belt with key ring , and color printing label on the bag.
Material: Nylon bag+PVC mask
Color: Red, Black, Orange, Green, Blue and so on
Application: Rescue breathing
Size: 27.5*20cm
Bag Size: 5*5.5cm
Type: First-Aid Devices
1). CPR consist of face film and one-way filter,the face shield is made of PVC material.
2). The filter is made of PVC or non-woven cloth,All parts adopt high-quality eco-friendly material, free latex.
3). Each in a PP belt with key ring , and color printing label on the bag.
Material: Nylon bag+PVC mask
Color: Red, Black, Orange, Green, Blue and so on
Application: Rescue breathing
Size: 27.5*20cm
Bag Size: 5*5.5cm
Type: First-Aid Devices
Product category: Disposable articles for hospitals
Medical Protective Comfortable Goggles
Description
1. The eyeglass are made of imported polycarbonate materials, which are reinforced with precision work.
2. Ergonomic design without metal accessories, it looks more open and wearing safer and more comfortable.
3. It is suitable for protection during examination and treatment in medical institutions, blocking splashing or splashing of body fluids and blood, and can also be used for daily protection.
Color: Transparent
Lenses: Polycarbonate
Frame Material: Silicone
Application: For doctor, chemical, surgeon, lab
Usage: Anti saliva, fog, virus
1. The eyeglass are made of imported polycarbonate materials, which are reinforced with precision work.
2. Ergonomic design without metal accessories, it looks more open and wearing safer and more comfortable.
3. It is suitable for protection during examination and treatment in medical institutions, blocking splashing or splashing of body fluids and blood, and can also be used for daily protection.
Color: Transparent
Lenses: Polycarbonate
Frame Material: Silicone
Application: For doctor, chemical, surgeon, lab
Usage: Anti saliva, fog, virus
Product category: Disposable articles for hospitals
Back Protection Belt
Description
High quality back support belt; Used for work, sports & everyday activities to provide support & reduce unwanted twisting of the spine
Protects the spine from injury and unnecessary stress
The mesh micropores ensure air and moisture penetration, heat and sweat dissipation
Moderate fixation of the lumbosacral spine and anterior abdominal wall while performing and weight lifting-related work.
Material: Composite fabric
Type: Working Waist Support Brace
Size: S, M, L, XL
Color: Black
Function: Protection during working
Feature: Adjustable and Safe
High quality back support belt; Used for work, sports & everyday activities to provide support & reduce unwanted twisting of the spine
Protects the spine from injury and unnecessary stress
The mesh micropores ensure air and moisture penetration, heat and sweat dissipation
Moderate fixation of the lumbosacral spine and anterior abdominal wall while performing and weight lifting-related work.
Material: Composite fabric
Type: Working Waist Support Brace
Size: S, M, L, XL
Color: Black
Function: Protection during working
Feature: Adjustable and Safe
Product category: Disposable articles for hospitals
Kinesiology Tape Sport
Specification:
1. Water proof: 70%, level 3
2. Sweat proof
3. Stretch: More than 160%
4. Super stick: More than 7 days
Size: Normal Width: 2.5cm/3.8cm/5cm/7.5cm/10cm
Normal Length: 5cm
Color: Red, Blue, Black, Skin(Tan/Beige).
Features:
1. Comfortable substrate
2. Allow full range of motion
3. Soft and breathable
4. Provide consistent compression, apply properly to avoid cutting circulation
5. Stable stretch and reliable stickiness.
1. Water proof: 70%, level 3
2. Sweat proof
3. Stretch: More than 160%
4. Super stick: More than 7 days
Size: Normal Width: 2.5cm/3.8cm/5cm/7.5cm/10cm
Normal Length: 5cm
Color: Red, Blue, Black, Skin(Tan/Beige).
Features:
1. Comfortable substrate
2. Allow full range of motion
3. Soft and breathable
4. Provide consistent compression, apply properly to avoid cutting circulation
5. Stable stretch and reliable stickiness.
Product category: Disposable articles for hospitals
First Aid Kit
Description:
Shoulder strap and stow-away waist strap
#9 zippers
Map pocket inside protective storm flap with side-release closure
Internal pouch for handheld radio with antenna access
Internal elastic loops for chem-lights
Internal hook & loop section for handgun, spare mag, or other modular pouches
Two dividers create three internal sections
External zippered accessory pocket with elastic securing bands holds three magazines
External zippered pouches at both ends hold GPS, phone, etc.
Type: First-Aid Devices
Application: Police and army first aid kit
Usage: trauma,tactical
Total Weight: 0.5kg
Including: Tourniquet,emergency bandage, shear,chest seal
Shoulder strap and stow-away waist strap
#9 zippers
Map pocket inside protective storm flap with side-release closure
Internal pouch for handheld radio with antenna access
Internal elastic loops for chem-lights
Internal hook & loop section for handgun, spare mag, or other modular pouches
Two dividers create three internal sections
External zippered accessory pocket with elastic securing bands holds three magazines
External zippered pouches at both ends hold GPS, phone, etc.
Type: First-Aid Devices
Application: Police and army first aid kit
Usage: trauma,tactical
Total Weight: 0.5kg
Including: Tourniquet,emergency bandage, shear,chest seal
Product category: Disposable articles for hospitals
FFP2 with Fliter Respirator
- Conforms to AS/NZS 1716:2012
- Economical models offer excellent value for money
- Latex-free head straps and inner nose seal
- Colour coded for ease of identification –
- Yellow P1, Blue P2, Grey with charcoal
- Soft inner nose foam
- Exhalation valve reduces hot air buildup and
- easy breath in hot/humid environments
- Activated Charcoal offers relief from nuisance
- organic vapors (below WEL)
- Maintenance Free
- Six models available – including valved and
- charcoal containing options
- Compatible with a wide range of other
- Personal Protective Equipment (PPE)
Product category: Laboratory equipment, Disposable articles for hospitals
Emergency Thermal Blanket
Feature:
1. This emergency blanket/ Life-saving survival blanket can keep your body from rain, wind, heat, and coldness.
2. It is made from PET film, extremely lightweight, flexible, and can retain 90% body heat in cold weather.
3. It can deflect heat and sunshine in hot and sunny day, and can be used to offset hypothermic reactions.
4. The Emergency Blanket is waterproof, reusable, and portable. Its perfect for camping trips and sporting events in addition to emergencies.
5. The silver side protects the patient from the heat. The gold side protects the patient from the cold.
Material:PET
Size: 120x210 cm, 130x210 cm, 140x210cm;160*210cm;132*213cm or as your required
Colors: Silver-silver/Gold-silver/Army green
Usage: Deal with emergency natural disasters
Packaging: Packed in PP bag, or other custom packing
Safety: Eco-friendly
Custom Logo: Printing
1. This emergency blanket/ Life-saving survival blanket can keep your body from rain, wind, heat, and coldness.
2. It is made from PET film, extremely lightweight, flexible, and can retain 90% body heat in cold weather.
3. It can deflect heat and sunshine in hot and sunny day, and can be used to offset hypothermic reactions.
4. The Emergency Blanket is waterproof, reusable, and portable. Its perfect for camping trips and sporting events in addition to emergencies.
5. The silver side protects the patient from the heat. The gold side protects the patient from the cold.
Material:PET
Size: 120x210 cm, 130x210 cm, 140x210cm;160*210cm;132*213cm or as your required
Colors: Silver-silver/Gold-silver/Army green
Usage: Deal with emergency natural disasters
Packaging: Packed in PP bag, or other custom packing
Safety: Eco-friendly
Custom Logo: Printing
Product category: Disposable articles for hospitals
Latex Rubber Hand Gloves
Product Feature:
The standard choice of natural rubber gloves:
100% Natural rubber delivers excellent sensitivity with superior tensile strength.
Pure cotton flock lining is soft, non irritant and superbly comfortable.
Specially treated to reduce the risk of allergic reactions.
Embossed grip on palm and fingers.
Rolled cuffs.
Flock lined for easy on, easy off as well as perspiration absorption.
Caution: These products contain natural rubber latex which may cause allergic reactions in some people.
Size: S, M, L, XL
Color: Black
Weight: 100g
Length: 30cm
Technology: Unlined and flocklined household latex glove
Cuff: Beaded cuff straight cuff wave cuff
Material: 100% natural latex
Usage: Protect hands
The standard choice of natural rubber gloves:
100% Natural rubber delivers excellent sensitivity with superior tensile strength.
Pure cotton flock lining is soft, non irritant and superbly comfortable.
Specially treated to reduce the risk of allergic reactions.
Embossed grip on palm and fingers.
Rolled cuffs.
Flock lined for easy on, easy off as well as perspiration absorption.
Caution: These products contain natural rubber latex which may cause allergic reactions in some people.
Size: S, M, L, XL
Color: Black
Weight: 100g
Length: 30cm
Technology: Unlined and flocklined household latex glove
Cuff: Beaded cuff straight cuff wave cuff
Material: 100% natural latex
Usage: Protect hands
Product category: Disposable articles for hospitals
Medical Deep Breathing Lung Exerciser Incentive Spirometer Three Balls Spirometer
- Material:PP, Medical Grade PVC / TPU, PP, Medical Grade PVC / TPU
- Size:600CC/900CC/1200CC, 58*38*38CM, Uniform
- Color:Transparent
- Application:Lung Exercise After Spanchnocoele Operation
- Stock:yes
- Usage:Respiratory Products
Product category: Disposable articles for hospitals
Disposable Latex Examination Glove
Surface: Textured or smooth
Type: Powdered or powdered-free
Material: 100% natural latex rubber
Color: Milky white
Testing insure: AQL 2.5
H.S. code: HS40151100
Payment terms: T/T,L/C, Western Union, Paypal
MOQ: 100000 Pairs
Capacity: 50,0000Pairs/day
Sample: offered within 5 days generally
OEM: Offered
Package: 100pieces/box, 10boxes/carton
Loading port: Qingdao /Shanghai port or up to customer
Delivery time: 15-30days and up to customer's quantity
Certificate: CE/ISO
Type: Powdered or powdered-free
Material: 100% natural latex rubber
Color: Milky white
Testing insure: AQL 2.5
H.S. code: HS40151100
Payment terms: T/T,L/C, Western Union, Paypal
MOQ: 100000 Pairs
Capacity: 50,0000Pairs/day
Sample: offered within 5 days generally
OEM: Offered
Package: 100pieces/box, 10boxes/carton
Loading port: Qingdao /Shanghai port or up to customer
Delivery time: 15-30days and up to customer's quantity
Certificate: CE/ISO
Product category: Disposable articles for hospitals
200ML CT High Pressure Nemoto/Medrad Injector Integra Syringe Angiography Syringe
Quick Details:
- Size: 100ML, 200ML
- Material: PP, PE, PVC
- Color: Transparent
- Packaging: 50pcs/ctn, 57*41*41cm
- Sterile Disposable High pressure Injector Syringes are intended to be used in the delivery of contrast medium in angiography, CT and MRI enhancement procedures with power injectors.
- Medical high-pressure syringe can be used for injection of contrast agent in angiography, and also for injection of contrast agent in CT angiography.
Product category: Disposable articles for hospitals
Cervical Collar Neck Brace
Description:
The Cervical Collar is two-piece high density foam design. It can provide more powerful support and greater limitations for flexion, extension and rotation. The Cervical Collar Traction can prevent the neck from performing unwanted motions that could cause further injury. The hook&loop design makes it easy to use in the patient's recovery.
Cervical Collar Feature:
(1) Conformance to the shoulder allows increased stability and comfort
(2) A large trachea opening allows for quick access to pulse monitoring and emergency tracheotomies
(3)Ventilation holes reduce heat and moisture
(4)hook&loop design easy to apply and secure
(5)Lightweight, two-piece design made of plastazote foam
(6)Waterproof for bathing and aqua-therapy.
(7)Using for patient recovery or used with head immobilizer and spine board in emergency medical
(8)For children and adult in orthopedic
Material: IXPE foam
Size: S M L
Color: Skin or customized
Application: Head fixed
The Cervical Collar is two-piece high density foam design. It can provide more powerful support and greater limitations for flexion, extension and rotation. The Cervical Collar Traction can prevent the neck from performing unwanted motions that could cause further injury. The hook&loop design makes it easy to use in the patient's recovery.
Cervical Collar Feature:
(1) Conformance to the shoulder allows increased stability and comfort
(2) A large trachea opening allows for quick access to pulse monitoring and emergency tracheotomies
(3)Ventilation holes reduce heat and moisture
(4)hook&loop design easy to apply and secure
(5)Lightweight, two-piece design made of plastazote foam
(6)Waterproof for bathing and aqua-therapy.
(7)Using for patient recovery or used with head immobilizer and spine board in emergency medical
(8)For children and adult in orthopedic
Material: IXPE foam
Size: S M L
Color: Skin or customized
Application: Head fixed
Product category: Disposable articles for hospitals
Isopropyl Alcohol Swab Stick
Material: 100% cotton + plaster stick
Color: White/black/pink/blue/green, etc.
Size Cotton Bud: 7.5cm
Feature: Disposable cotton swab
Type: Swab Stick
Specification: Tip 5*12mm Stick 2.4*70mm
Application:Wound caring, cosmetic and daily use
Samples: Free samples available
Color: White/black/pink/blue/green, etc.
Size Cotton Bud: 7.5cm
Feature: Disposable cotton swab
Type: Swab Stick
Specification: Tip 5*12mm Stick 2.4*70mm
Application:Wound caring, cosmetic and daily use
Samples: Free samples available
Product category: Disposable articles for hospitals
Military Trauma Bandage Medical Israeli Bandage
Material: Cotton/Polyester/Spandex
Color: Gray or customized
Size: 7.5cm, 10cm, 15cm, ect.
Application: Military, First aid kit, Emergency Rescue
Feature: Eco-friendly
Packing size: 54x35x44cm
Feature
1. Small and portable for traumatic hemorrhagic injury.
2. Sterile disposable packaging, special dressing surface technology, will not break the wound again when removing the bandage.
3. Multi-directional dressing design that allows the wrapping tape to be wound in different directions. It can be used on the head, legs, arms, torso, or elsewhere in the body, and is extremely useful in the groin and head hemostasis.
4. Simple and quick: Even if the injured person has one-handed operation, there is no problem, and it is convenient for self-rescue on site.
Color: Gray or customized
Size: 7.5cm, 10cm, 15cm, ect.
Application: Military, First aid kit, Emergency Rescue
Feature: Eco-friendly
Packing size: 54x35x44cm
Feature
1. Small and portable for traumatic hemorrhagic injury.
2. Sterile disposable packaging, special dressing surface technology, will not break the wound again when removing the bandage.
3. Multi-directional dressing design that allows the wrapping tape to be wound in different directions. It can be used on the head, legs, arms, torso, or elsewhere in the body, and is extremely useful in the groin and head hemostasis.
4. Simple and quick: Even if the injured person has one-handed operation, there is no problem, and it is convenient for self-rescue on site.
Product category: Disposable articles for hospitals
Plastic Lab Centrifuge Tube
Color: Transparent
Material: PP
Size: 1.5ml-100ml
Using: Blood tests, bacterial culture, etc.
Sterile: Sterile/Non sterile
Feature:
Made of high grade transparent PP material, widely used in molecular biology, clinical chemistry, biochemistry research.
Clear white or black graduation on tubes, Lage white writing area for easy marking.
Easy One-hand operation to open or close the cap.
Maximum RCF at 12000×g.
Adapted to wide range temperatures from -80°C to 120°C.
Available in bulk or individual pack.
Available in sterile by E.O. or Gamma radiation.
Material: PP
Size: 1.5ml-100ml
Using: Blood tests, bacterial culture, etc.
Sterile: Sterile/Non sterile
Feature:
Made of high grade transparent PP material, widely used in molecular biology, clinical chemistry, biochemistry research.
Clear white or black graduation on tubes, Lage white writing area for easy marking.
Easy One-hand operation to open or close the cap.
Maximum RCF at 12000×g.
Adapted to wide range temperatures from -80°C to 120°C.
Available in bulk or individual pack.
Available in sterile by E.O. or Gamma radiation.
Product category: Disposable articles for hospitals
Disposable Safety Blood Lancet Needle
Sterilization: EO
Specification: 21G 23G 25G 26G 28G 30G
Size: 1.5mm, 1.8mm, 2,2mm
Color: Yellow Green Blue Pink ect.
Package: 100pcs/box, 2000pcs/ctn
Product Feature:
Safe: The patented design of the protective cap, which can conversely insert into body after use, is safe and reliable, and avoids the possibility of secondary infection.
Needle is completely sealed with plastic, the needle is always hidden in the shell before use, to ensure safety and sterility.
Needle will be retractable and locked automatically after use.
Less Pain: Double spring design. The returning spring will reduce the pain.
Convenience: Streamlined design, ergonomic, small and exquisite, comfortable in hand and easy to use.
A Variety Models Complete: A variety models complete satisfy the blood amount requirements of different crowds.
Specification: 21G 23G 25G 26G 28G 30G
Size: 1.5mm, 1.8mm, 2,2mm
Color: Yellow Green Blue Pink ect.
Package: 100pcs/box, 2000pcs/ctn
Product Feature:
Safe: The patented design of the protective cap, which can conversely insert into body after use, is safe and reliable, and avoids the possibility of secondary infection.
Needle is completely sealed with plastic, the needle is always hidden in the shell before use, to ensure safety and sterility.
Needle will be retractable and locked automatically after use.
Less Pain: Double spring design. The returning spring will reduce the pain.
Convenience: Streamlined design, ergonomic, small and exquisite, comfortable in hand and easy to use.
A Variety Models Complete: A variety models complete satisfy the blood amount requirements of different crowds.
Product category: Disposable articles for hospitals
I.V. Cannula With Injection Port I.V. Catheter
Color: Orange, grey, dark green, pink, blue, yellow, purple
Size: 14-26G
Needle Size: 19mm, 25mm, 32mm, 45mm
Sterilization: EO gas
Material: Medical plastic and stainless steel
Type: Pen-like, With wings, With wings & Injection port, Y type, Safety type
Feature:
1. With double wings & Injection port
2. Bevel needle for easier, less atraumatic insertion
3. Thin wall FEP(PU) catheter with 3 embedded X-Ray contrast lines provides high flow rate
4. Flexible and kink resistant catheter
Size: 14-26G
Needle Size: 19mm, 25mm, 32mm, 45mm
Sterilization: EO gas
Material: Medical plastic and stainless steel
Type: Pen-like, With wings, With wings & Injection port, Y type, Safety type
Feature:
1. With double wings & Injection port
2. Bevel needle for easier, less atraumatic insertion
3. Thin wall FEP(PU) catheter with 3 embedded X-Ray contrast lines provides high flow rate
4. Flexible and kink resistant catheter
Product category: Laboratory equipment, Disposable articles for hospitals
Medical Anesthesia Face Mask
Material: Clear soft pvc, latex free
Size: 0#/1#/2#/3#/4#/5#
Color: Transparent
Type: Adult, Pediatric and Infant
Application: Clinic, Hospital
Description:
Economic anesthesia mask is designed and produced for short-term anesthesia before surgery. It is more economic than PVC anesthesia mask and it is softer and more comfortable.
Features:
1. Be made from medical grade TPE;
2. For short-term anesthesia use;
3. Visible color coding for different sizes by the soft cuff;
4. No need for any inflation before surgery, easy operation;
5. Different sizes for Adult, Pediatric and Infant.
Size: 0#/1#/2#/3#/4#/5#
Color: Transparent
Type: Adult, Pediatric and Infant
Application: Clinic, Hospital
Description:
Economic anesthesia mask is designed and produced for short-term anesthesia before surgery. It is more economic than PVC anesthesia mask and it is softer and more comfortable.
Features:
1. Be made from medical grade TPE;
2. For short-term anesthesia use;
3. Visible color coding for different sizes by the soft cuff;
4. No need for any inflation before surgery, easy operation;
5. Different sizes for Adult, Pediatric and Infant.
Product category: Disposable articles for hospitals
Orthopedic Cast Pad
Width: 5cm, 7.5cm,10cm,15cm, 20cm
Length: 2.7m, 3m, 3.6m, 4m, 4.5m, 5m
Weight: 70g, 75g, 80g, 85g
Material: polyester,viscose,cotton
Color: White
Application: Orthopedic
Type: General Medical Supplies
Description:
1.Orthopaedic padding is the wide-used supporting material for surgery and swaddling of plaster of paris bandages.
2.Made of natural or synthetic non-woven fabrics.
Advantages:
Soft, smooth and conformable to the body’s shape.It is tearable, has low moisture retention, and is porous enough to allow air circulation and to reduce skin irritation.
Indications:
It can be used under all types of casting materials,providing effective, comfortable and safe casting.
Package:
Each bandage is wrapped in a polyethylene sleeve,twelve bandages are packed in a sealed polyethylene bag.
Length: 2.7m, 3m, 3.6m, 4m, 4.5m, 5m
Weight: 70g, 75g, 80g, 85g
Material: polyester,viscose,cotton
Color: White
Application: Orthopedic
Type: General Medical Supplies
Description:
1.Orthopaedic padding is the wide-used supporting material for surgery and swaddling of plaster of paris bandages.
2.Made of natural or synthetic non-woven fabrics.
Advantages:
Soft, smooth and conformable to the body’s shape.It is tearable, has low moisture retention, and is porous enough to allow air circulation and to reduce skin irritation.
Indications:
It can be used under all types of casting materials,providing effective, comfortable and safe casting.
Package:
Each bandage is wrapped in a polyethylene sleeve,twelve bandages are packed in a sealed polyethylene bag.
Product category: Disposable articles for hospitals
Cotton Wool Roll
Material: 100% Cotton
Type: roll type
Color: pure white
Application: medical industry and sanitary industry
Features: clean and tidy, soft and comfortable with good absorbency
Specification:
1. Made from 100% high quality cotton, bleached, with high absorbency capacity
2. Soft and conforming, widely used in medical treatment or hospital works
3. Type: roll type
4. Color: white
5. Size:50g, 100g, 150g, 200g, 250g, 400g, 500g, 1000g or customized
6. Packing:1 roll / blue kraft paper or polybag
Type: roll type
Color: pure white
Application: medical industry and sanitary industry
Features: clean and tidy, soft and comfortable with good absorbency
Specification:
1. Made from 100% high quality cotton, bleached, with high absorbency capacity
2. Soft and conforming, widely used in medical treatment or hospital works
3. Type: roll type
4. Color: white
5. Size:50g, 100g, 150g, 200g, 250g, 400g, 500g, 1000g or customized
6. Packing:1 roll / blue kraft paper or polybag
Product category: Disposable articles for hospitals
Sterile Medical Cotton Swab Stick
Model Number: AP-DCS-001
Stick material: plastic/wooden/bamboo
Packing: 1 pcs/bag, 100 pcs/bag or customized
Sterilize: Sterilized or non sterilized
Size: 7.5cm, 15cm, 18cm or customized
Product Features:
Non-toxic, non-irritating, with good water absorption and easy to use.
Main product: Plastic stick cotton buds, Wooden stick cotton buds, Bamboo stick cotton stick, Paper stick cotton stick.
Provide all kinds of cotton swabs with different materials ad levels for clients.
Medical swabs generally directly touch the wounds of patients, and have relatively high requirements on the sterilization process. The other is the selection of raw materials for absorbent cotton for making cotton swabs. Raw materials that meet the requirements of standards and industry standards must be selected.
Stick material: plastic/wooden/bamboo
Packing: 1 pcs/bag, 100 pcs/bag or customized
Sterilize: Sterilized or non sterilized
Size: 7.5cm, 15cm, 18cm or customized
Product Features:
Non-toxic, non-irritating, with good water absorption and easy to use.
Main product: Plastic stick cotton buds, Wooden stick cotton buds, Bamboo stick cotton stick, Paper stick cotton stick.
Provide all kinds of cotton swabs with different materials ad levels for clients.
Medical swabs generally directly touch the wounds of patients, and have relatively high requirements on the sterilization process. The other is the selection of raw materials for absorbent cotton for making cotton swabs. Raw materials that meet the requirements of standards and industry standards must be selected.
Product category: Disposable articles for hospitals
Medical Autoclave Sterilization Indicator Tape
Size: 12mm/19mm/25mm
Length: 50m
Usage: Packaging Medical Device
Packing: 1 roll/pack
Color: Yellow
Material Medical Grade Paper
Usage: This Tape is intended to be pasted outside the articles pack or container to be sterilized andused for fixing articles pack or indicating whether the articles pack or container has been sterilized, thus to prevent mixing with other untreated articles pack or container.
Autoclave Tape consists of yellow indicator stripes and pressure-sensitive adhesive. When the steam sterilization is completed, the color of the indicator strips will turn from yellow to dark brown or black. The complete color change occurs in 15 to 20 minutes at 121C,in a gravity cycle, and in 6 minutes in both a132C gravity and vacuum-assisted cycle.
Autoclave Tape is designed to secure packs wrapped with woven, treated woven, non-woven, paper and paper/plastic wraps. After sterilization, the tape can be removed easily and cleanly, no adhesive residue.
Length: 50m
Usage: Packaging Medical Device
Packing: 1 roll/pack
Color: Yellow
Material Medical Grade Paper
Usage: This Tape is intended to be pasted outside the articles pack or container to be sterilized andused for fixing articles pack or indicating whether the articles pack or container has been sterilized, thus to prevent mixing with other untreated articles pack or container.
Autoclave Tape consists of yellow indicator stripes and pressure-sensitive adhesive. When the steam sterilization is completed, the color of the indicator strips will turn from yellow to dark brown or black. The complete color change occurs in 15 to 20 minutes at 121C,in a gravity cycle, and in 6 minutes in both a132C gravity and vacuum-assisted cycle.
Autoclave Tape is designed to secure packs wrapped with woven, treated woven, non-woven, paper and paper/plastic wraps. After sterilization, the tape can be removed easily and cleanly, no adhesive residue.
Product category: Disposable articles for hospitals
Disposable AV Fistula Needle For Dialysis Use
Material: Medical Grade PVC
Size: 15G, 16G, 17G
Length: 15cm, 30cm
Sterilization: EO
Wing type: Rotatable wings and fixed wings
Application: Hemodialysis
Packing: Blister/PE packing
Features:
1. Fine polishing process on blade to puncture easily and smoothly.
2. Back eye design and ultrathin wall needle tube maximizes blood flow.
3. Rotatable wings and fixed wings are available to choose.
Size: 15G, 16G, 17G
Length: 15cm, 30cm
Sterilization: EO
Wing type: Rotatable wings and fixed wings
Application: Hemodialysis
Packing: Blister/PE packing
Features:
1. Fine polishing process on blade to puncture easily and smoothly.
2. Back eye design and ultrathin wall needle tube maximizes blood flow.
3. Rotatable wings and fixed wings are available to choose.
Product category: Disposable articles for hospitals
Medical Urine Specimen Cup
Material: PP or PS for medical-use
Size: 30ml, 40ml, 60ml, 90ml, 100ml, 120ml, etc.
Color: Yellow, transparent or customized
Sterilized: EO, sterile or non-sterile available
Features: Sealing performance, and effectively prevent leakage and contamination samples, easy to save and transport.
Packing: In bulk or individual packing ,or customized
Description:
Sample cup is used for urine and specimen collection
It can form a closed urine collection.
Material: PP or PS for medical-use
Specification:30ml, 40ml, 60ml, 90ml, 100ml, 120ml, etc.
Cap Color: Yellow, Transparent or customized
Cap Structure: Luer Slip or Luer Lock
Sterile or Non Sterile, buyer's label offered.
Features:
1. Medical grade pp material, ensure reliable quality.
2. Good sealing and watertight, no leakage
3. Individual poly bag pack, sterile EO gas, no pollution.
Size: 30ml, 40ml, 60ml, 90ml, 100ml, 120ml, etc.
Color: Yellow, transparent or customized
Sterilized: EO, sterile or non-sterile available
Features: Sealing performance, and effectively prevent leakage and contamination samples, easy to save and transport.
Packing: In bulk or individual packing ,or customized
Description:
Sample cup is used for urine and specimen collection
It can form a closed urine collection.
Material: PP or PS for medical-use
Specification:30ml, 40ml, 60ml, 90ml, 100ml, 120ml, etc.
Cap Color: Yellow, Transparent or customized
Cap Structure: Luer Slip or Luer Lock
Sterile or Non Sterile, buyer's label offered.
Features:
1. Medical grade pp material, ensure reliable quality.
2. Good sealing and watertight, no leakage
3. Individual poly bag pack, sterile EO gas, no pollution.
Product category: Disposable articles for hospitals
Pushing/Crossing Valve Disposable Urine Bag
Features:
Be made from medical grade PVC;
Anti-reflux valve is available, to prevent urine reflux;
One-handed control the discharge valve;
All with finger operation prevent splash of urine;
Sterile by EO, single use.
Caution:
1. For single use only, discard after use.
2. Do not store in direct sunlight, at extreme temperatures or in high humidity.
3. Do not use if package is open or damaged
Be made from medical grade PVC;
Anti-reflux valve is available, to prevent urine reflux;
One-handed control the discharge valve;
All with finger operation prevent splash of urine;
Sterile by EO, single use.
Caution:
1. For single use only, discard after use.
2. Do not store in direct sunlight, at extreme temperatures or in high humidity.
3. Do not use if package is open or damaged
Product category: Disposable articles for hospitals
Ultrasound Gel For Medical Use
Main Material: Water-soluble high polymer
Color: Transparent Blue
Size: 500ml, 1L, 5L
Sound Speed: 1520-1620m/s
Sound Impedance Frequency: 1.5×106-1.7×106Pa.s/m
Sound Attenuation: 05dB/cm. Mhz
Viscosity: 5Pa.s
PH Value: 5.5-8
Purpose:
Ultrasound inspect medium, can be use with type A, B, M, or D ultrasonic diagnostic instrument. It is applicable to the clinical pathologic inspect for the department of obstetrics and gynecology, digestion, urinary and nervous systems.
Feature:
Better sound transmission, distinctive image display.
No toxic and irritant effect.
No damage and corrosion to the ultrasound probe.
Method of Application:
During the ultrasonic examination, squeeze the coupling gel and apply it directly on the diagnostic position. Upon scanning by the ultrasonic instrument, a clear image may be acquired. After completing the examination, wipe out the remaining coupling agent with tissue paper.
Color: Transparent Blue
Size: 500ml, 1L, 5L
Sound Speed: 1520-1620m/s
Sound Impedance Frequency: 1.5×106-1.7×106Pa.s/m
Sound Attenuation: 05dB/cm. Mhz
Viscosity: 5Pa.s
PH Value: 5.5-8
Purpose:
Ultrasound inspect medium, can be use with type A, B, M, or D ultrasonic diagnostic instrument. It is applicable to the clinical pathologic inspect for the department of obstetrics and gynecology, digestion, urinary and nervous systems.
Feature:
Better sound transmission, distinctive image display.
No toxic and irritant effect.
No damage and corrosion to the ultrasound probe.
Method of Application:
During the ultrasonic examination, squeeze the coupling gel and apply it directly on the diagnostic position. Upon scanning by the ultrasonic instrument, a clear image may be acquired. After completing the examination, wipe out the remaining coupling agent with tissue paper.
Product category: Disposable articles for hospitals
PE Adhesive Tape
Material: PE film with medical hypoallergenic glue
Length: 5yard, 10yard
Width: 1.25, 2.5, 5, 7.5, 10cm, etc
Color: Transparent
Type: Surgical Supplies
Application: Excellent for IVsites and tubing retention
Packing: Individual/simple/plastic/metal packing
Features:
1. PE material with micro-holes
2. Hypoallergenic
3. Good air permeability
4. Soft and comfortable
5. Easy tear by hand in longitude and latitude directions
Length: 5yard, 10yard
Width: 1.25, 2.5, 5, 7.5, 10cm, etc
Color: Transparent
Type: Surgical Supplies
Application: Excellent for IVsites and tubing retention
Packing: Individual/simple/plastic/metal packing
Features:
1. PE material with micro-holes
2. Hypoallergenic
3. Good air permeability
4. Soft and comfortable
5. Easy tear by hand in longitude and latitude directions
Product category: Disposable articles for hospitals
PE Plastic Transparent Polyethylene Gloves
Function: Household; For Kitchen; Restaurant; Medical Use
Material: HDPE / LDPE
Size: S; M; L; XL; XXL; XXXL, Or Customized
Feature: Food Contact Grade; High Transparency; Clean; Good Opening
Color: Transparent; White; With Master Batch
Printing: Up to 2 Colors
Packaging: Loose Packed; Retail Box Packed; Carton; Customized
Delivery Detail: 20 ~ 35 Days after Payment
Material: HDPE / LDPE
Size: S; M; L; XL; XXL; XXXL, Or Customized
Feature: Food Contact Grade; High Transparency; Clean; Good Opening
Color: Transparent; White; With Master Batch
Printing: Up to 2 Colors
Packaging: Loose Packed; Retail Box Packed; Carton; Customized
Delivery Detail: 20 ~ 35 Days after Payment
Product category: Disposable articles for hospitals
PE Neck Cervical Collar
Material: PE
Size: S/M/L/XL
Color: White
Application: Head fixed
Type: Medical equipment
Description:
1.Ideal use for prevention and auxiliary treatment of cervical vertebra syndrome , such as cervical spondylosis and cervical muscle strain etc
2. Neck support for cervical spondylosis rehabilitation after surgery.
Feature:
1. Well ventilated support plate to increase cool and comfort.
2. Two pieces of self-adhesive support plate can adjust height freely to ensure perfect fit between chin and cervical collar
3.Double buckle structure to ensure the best fixed effect.
4. Material: PE plastic plate(High Quality Polyethylene), high poly foam and sticky buckle
Size: S/M/L/XL
Color: White
Application: Head fixed
Type: Medical equipment
Description:
1.Ideal use for prevention and auxiliary treatment of cervical vertebra syndrome , such as cervical spondylosis and cervical muscle strain etc
2. Neck support for cervical spondylosis rehabilitation after surgery.
Feature:
1. Well ventilated support plate to increase cool and comfort.
2. Two pieces of self-adhesive support plate can adjust height freely to ensure perfect fit between chin and cervical collar
3.Double buckle structure to ensure the best fixed effect.
4. Material: PE plastic plate(High Quality Polyethylene), high poly foam and sticky buckle
Product category: Patient beds and nursing beds, Laboratory equipment, Disposable articles for hospitals
Medical Disposable PE Apron
Color: Blue, Pink, Green, White, or customized
Grams: 7-14g/pcs for choose
Size: As customer's request
Material: HDPE or LDPE (Polyethylene resin),plastic
Thickness: 0.01-0.10mm; Customized
Feature: Waterproof, cheap
Application: Home cleaning, Medical, Examination, ect.
Description:
PE Disposable Apron is made by 100% PE. And all the production is aseptic and security.Its advantage are oilproof, waterproof, antistatic,biodegradable. It can use for cooking, home cleaning,washing,hospital,food testing, garden cleaning ect.
Grams: 7-14g/pcs for choose
Size: As customer's request
Material: HDPE or LDPE (Polyethylene resin),plastic
Thickness: 0.01-0.10mm; Customized
Feature: Waterproof, cheap
Application: Home cleaning, Medical, Examination, ect.
Description:
PE Disposable Apron is made by 100% PE. And all the production is aseptic and security.Its advantage are oilproof, waterproof, antistatic,biodegradable. It can use for cooking, home cleaning,washing,hospital,food testing, garden cleaning ect.
Product category: Disposable articles for hospitals
Platelet Rich Plasma PRP Kit
Materia: PET, Glass
Weight: 150g,260g
Capacity: 6ml,8ml,10ml,12ml,15ml,30ml,40ml
Size: 13*100mm,16*100mm,16*125mm
Surface: Sterile interior
Centrifugation: 10-15min
Application: Orthopedic, sport medicine, wound management
Activator: Calcium chloride solution
Type: Pipe, Drainage Tubes & Containers
Weight: 150g,260g
Capacity: 6ml,8ml,10ml,12ml,15ml,30ml,40ml
Size: 13*100mm,16*100mm,16*125mm
Surface: Sterile interior
Centrifugation: 10-15min
Application: Orthopedic, sport medicine, wound management
Activator: Calcium chloride solution
Type: Pipe, Drainage Tubes & Containers
Product category: Disposable articles for hospitals
Vinyl examination gloves
Type: Powdered or powdered-free
Material: High quality PVC material
Color: Clear, blue or customized
Testing insure: AQL 2.5 or customized
Payment terms: T/T, L/C, Western Union, Palpay
MOQ: 100000 Pairs
Capacity: 50,0000Pairs/day
Samples: offered within 5 days generally
OEM: offered
Package: 100pieces/box, 10boxes/carton
Loading port: Qingdao /Shanghai port or up to customer
Delivery time: 15-30days and up to customer's quantity
Certificate: CE/ISO
Material: High quality PVC material
Color: Clear, blue or customized
Testing insure: AQL 2.5 or customized
Payment terms: T/T, L/C, Western Union, Palpay
MOQ: 100000 Pairs
Capacity: 50,0000Pairs/day
Samples: offered within 5 days generally
OEM: offered
Package: 100pieces/box, 10boxes/carton
Loading port: Qingdao /Shanghai port or up to customer
Delivery time: 15-30days and up to customer's quantity
Certificate: CE/ISO
Product category: Disposable articles for hospitals
Disposable Hypodermic Needle
Material:Stainless Steel
Usage: Clinical
Feature: Safe
Size: 14-33g
Sterile: Sterile & non sterile
Package: 100pcs/1 box, 2000pcs/carton, 56x25.5x37.5cm
Packing: Blister or bulk pack
Description:
High Quality Stainless Steel
Larger Inner Diameter High Flow
Sharpness Maximize Patient Comfort
Color Coded Hub by Size for Clear Recognition
Semi-transparent Needle-hub for Clearness of Flashback
Usage: Clinical
Feature: Safe
Size: 14-33g
Sterile: Sterile & non sterile
Package: 100pcs/1 box, 2000pcs/carton, 56x25.5x37.5cm
Packing: Blister or bulk pack
Description:
High Quality Stainless Steel
Larger Inner Diameter High Flow
Sharpness Maximize Patient Comfort
Color Coded Hub by Size for Clear Recognition
Semi-transparent Needle-hub for Clearness of Flashback
Product category: Disposable articles for hospitals
Umbilical Cord Clamp
Material: Polypropylene Material
Length: 5cm, 5.5cm, 5.8cm, ect.
Color: Blue, white, pink, ect.
Sterile: EO
Application: Gynecological, cervical cancer and venereal disease
Feature: Handy and light,useful
Description:
1.The umbilical cord clamp is made of medical-grade PVC of high quality.
2.Sterilized by EO gas; sterile, non-toxic, disposable.
3.Used for pregnant woman giving birth to baby, it is safe and convenient.
4.Different colors available, blue, white etc.
Length: 5cm, 5.5cm, 5.8cm, ect.
Color: Blue, white, pink, ect.
Sterile: EO
Application: Gynecological, cervical cancer and venereal disease
Feature: Handy and light,useful
Description:
1.The umbilical cord clamp is made of medical-grade PVC of high quality.
2.Sterilized by EO gas; sterile, non-toxic, disposable.
3.Used for pregnant woman giving birth to baby, it is safe and convenient.
4.Different colors available, blue, white etc.
Product category: Disposable articles for hospitals
Endotracheal Tube Oral/Nasal
Material: PVC
Application: Medical Use
Feature: Transparent, soft, smooth
Product Type: With or without cuff
Package: 20pcs/box, 200pcs/carton, 60*37*34cm
Description:
Available both with cuff and without cuff.
Made of transparent thermosensitive PVC that softens at body temperature.
With high-volume, low-pressure cuff.
Murphy eye to avoid comple respiratory obstruction.
Radiopaque line throughout the tube for X-ray visualization.
Application: Medical Use
Feature: Transparent, soft, smooth
Product Type: With or without cuff
Package: 20pcs/box, 200pcs/carton, 60*37*34cm
Description:
Available both with cuff and without cuff.
Made of transparent thermosensitive PVC that softens at body temperature.
With high-volume, low-pressure cuff.
Murphy eye to avoid comple respiratory obstruction.
Radiopaque line throughout the tube for X-ray visualization.
Product category: Disposable articles for hospitals
Viral Transport Tube With Swab
Type: VTM, VTM-N-1, VTM-N-2
One set: Two swabs, One tube, One Biohazard specimen bag
Transport media: VTM and VTM-N transport media can be chosen as needed.
Feature: Ready to use and easy to tear package, effectively avoid cross contamination.
Package: 50pc/box 300pc/ctn
--Disposable flocking swabs, one oral swab, one nasal swab.
--VTM and VTM-N transport media can be chosen as needed.
--Ready to use and easy to tear package, effectively avoid cross contamination.
--Supplied with Biohazard specimen bag, ensure transport safe and reliable.
One set: Two swabs, One tube, One Biohazard specimen bag
Transport media: VTM and VTM-N transport media can be chosen as needed.
Feature: Ready to use and easy to tear package, effectively avoid cross contamination.
Package: 50pc/box 300pc/ctn
--Disposable flocking swabs, one oral swab, one nasal swab.
--VTM and VTM-N transport media can be chosen as needed.
--Ready to use and easy to tear package, effectively avoid cross contamination.
--Supplied with Biohazard specimen bag, ensure transport safe and reliable.
Product category: Disposable articles for hospitals
Disposable Medical Latex Foley
Material: Nature Latex
Type: 2 way and 3 way
Size: FR-6/8/10/12/14/16/18/20/22/24/26/28/30
Length: 400mm (standard)
Volume: 5ml/5-15ml/20-30ml/30ml
Sterilization: EO
Packaging: 1pcs/individual, 10pcs/box, 50boxes/ctn
Feature:
1. Made from natural latex.
2. Latex Foley catheter is made of imported medical grade Latex, less allergic to patients.
3. It is used in departments of urology, internal medicine, surgery, obstetrics, and gynecology for drainage of urine and medication.
4. It is also used for patients suffering form moving with difficulty or being completely bed-ridden.
Type: 2 way and 3 way
Size: FR-6/8/10/12/14/16/18/20/22/24/26/28/30
Length: 400mm (standard)
Volume: 5ml/5-15ml/20-30ml/30ml
Sterilization: EO
Packaging: 1pcs/individual, 10pcs/box, 50boxes/ctn
Feature:
1. Made from natural latex.
2. Latex Foley catheter is made of imported medical grade Latex, less allergic to patients.
3. It is used in departments of urology, internal medicine, surgery, obstetrics, and gynecology for drainage of urine and medication.
4. It is also used for patients suffering form moving with difficulty or being completely bed-ridden.
Product category: Disposable articles for hospitals
Non Woven Gauze Swab Pad Dressing
Material: 100% cotton
Yarn: 40s, 32s, 21s
Mesh: 19x15, 24x20, 26x18, 28x24, 30x20 or customized
Thread: 13, 17, 20, etc.
Size: 5x5cm, 7.5x7.5cm, 10x10cm, 10x20cm
Layer: 4ply, 8ply, 12ply, 16ply, 24ply, 32ply
Edge: Unfolded or Folded
X-Ray: With or without
Color: White
Yarn: 40s, 32s, 21s
Mesh: 19x15, 24x20, 26x18, 28x24, 30x20 or customized
Thread: 13, 17, 20, etc.
Size: 5x5cm, 7.5x7.5cm, 10x10cm, 10x20cm
Layer: 4ply, 8ply, 12ply, 16ply, 24ply, 32ply
Edge: Unfolded or Folded
X-Ray: With or without
Color: White
Product category: Disposable articles for hospitals
Medical Gauze Roll Bandage
Description
1. Material: 100% cotton
2. Width: 2.5cm, 5cm, 7.5cm, 10cm, 15cm, 20cm
3. Length: 4.5m, 5m, 10m
4.Density: 40s*40s; 19*10mesh, 19*15mesh, 26*18mesh, etc
Other dimensions, width, length, and package can be produced as per requirement
5. Description: A gauze bandage is a thin, woven fabric material that is placed over a wound to keep it clean while allowing air to penetrate and promote healing. It can be used to secure a dressing in place, or it can be used directly on a wound. These bandages are the most common type and are available in many sizes. They are good for hard to reach areas that may be difficult to dress.
1. Material: 100% cotton
2. Width: 2.5cm, 5cm, 7.5cm, 10cm, 15cm, 20cm
3. Length: 4.5m, 5m, 10m
4.Density: 40s*40s; 19*10mesh, 19*15mesh, 26*18mesh, etc
Other dimensions, width, length, and package can be produced as per requirement
5. Description: A gauze bandage is a thin, woven fabric material that is placed over a wound to keep it clean while allowing air to penetrate and promote healing. It can be used to secure a dressing in place, or it can be used directly on a wound. These bandages are the most common type and are available in many sizes. They are good for hard to reach areas that may be difficult to dress.
Product category: Disposable articles for hospitals
Medical Absorbent Gauze Roll
1. Material: 100% cotton
2. Accessories: X-ray detectable or without
3. Width: 90cm-4ply, 120cm-4ply
4. Length: 4.5m, 5m, 10m
5. Density: 40s*40s; 19*10mesh, 19*15mesh, 26*18mesh etc
Other dimensions, width, length, and package can be produced as per requirement
Description:
The gauze is degreased and bleached by advanced way to ensure superior purity and absorbency. The quality meet the standard of English Medical Dictionary. The product has no fluorescence. It’s used widely in medical circle and other area.
2. Accessories: X-ray detectable or without
3. Width: 90cm-4ply, 120cm-4ply
4. Length: 4.5m, 5m, 10m
5. Density: 40s*40s; 19*10mesh, 19*15mesh, 26*18mesh etc
Other dimensions, width, length, and package can be produced as per requirement
Description:
The gauze is degreased and bleached by advanced way to ensure superior purity and absorbency. The quality meet the standard of English Medical Dictionary. The product has no fluorescence. It’s used widely in medical circle and other area.
Product category: Disposable articles for hospitals
Plaster Of Paris POP Bandage
Material: Plaster
Color: White
Application: Medical Care
Size: 5*2.7cm;7.5*2.7cm;10*2.7cm;etc
Type: Medical Adhesive
Description:
Consists of plain-weave gauze fabric coated with blend of alpha and beta calcium caliphate crystals, spooled on round perforated plastic core.
Benefits:
Immersion time 2 to 3 seconds only
Excellent molding ability
Initial setting time within 3 to 5 minutes, at immersion water temperature of 20c°.
Can be carefully subjected to weight bearing after 30 minutes
Very low plaster loss
When completely hardened have high strength at low bandage consumption
Indications:
Immobilization of all types of fractures.
Immobilization of diseased bones and joints
Correction of deformities
Color: White
Application: Medical Care
Size: 5*2.7cm;7.5*2.7cm;10*2.7cm;etc
Type: Medical Adhesive
Description:
Consists of plain-weave gauze fabric coated with blend of alpha and beta calcium caliphate crystals, spooled on round perforated plastic core.
Benefits:
Immersion time 2 to 3 seconds only
Excellent molding ability
Initial setting time within 3 to 5 minutes, at immersion water temperature of 20c°.
Can be carefully subjected to weight bearing after 30 minutes
Very low plaster loss
When completely hardened have high strength at low bandage consumption
Indications:
Immobilization of all types of fractures.
Immobilization of diseased bones and joints
Correction of deformities
Product category: Disposable articles for hospitals
Disposable Hospital Patient Adult PVC ID Identification Bands
Material: PVC
Color: Blue, pink, white, yellow, grey, green, transparent
Size: Adult and child
Feature: Waterproof, soft, eco-friendly
Usage: Single use
Description:
PVC wristbands are made from soft comfortable PVC and feature a snap closure. Our Vinyl wristbands are available in a wide variety of colors and sizes. The surface will accept handwritten patient information.
Features:
Non-toxic PVC film, medical grade
Waterproof, moisture-proof, anti-mildew
Closed loop wristband, easy to wear
Non-transferable, secure plastic snap provides maximum security
Hospital use: Pocket insert card type & write-on type &coating type
Color: Blue, pink, white, yellow, grey, green, transparent
Size: Adult and child
Feature: Waterproof, soft, eco-friendly
Usage: Single use
Description:
PVC wristbands are made from soft comfortable PVC and feature a snap closure. Our Vinyl wristbands are available in a wide variety of colors and sizes. The surface will accept handwritten patient information.
Features:
Non-toxic PVC film, medical grade
Waterproof, moisture-proof, anti-mildew
Closed loop wristband, easy to wear
Non-transferable, secure plastic snap provides maximum security
Hospital use: Pocket insert card type & write-on type &coating type
Product category: Disposable articles for hospitals
Surgical Carbon Steel Blade
Material: Stainless steel, carbon steel
Size: 10#,10A#, 11#, 12#,12B#,13#, 14#, 15#,15C# 16#, 18#, 19#, 20#, 21#, 22#, 23#, 24#, 25#, 25A#,26#, 27#, 34#, 36#
Sterilization: EO gas / Gamma Radiation
Certificate: CE & ISO
MOQ: 50,000pcs
Packing: 100pcs/box, 5000pcs/ctn, 34*20*17cm
Application: Used for cutting soft tissues in the basic surgical surgery
Size: 10#,10A#, 11#, 12#,12B#,13#, 14#, 15#,15C# 16#, 18#, 19#, 20#, 21#, 22#, 23#, 24#, 25#, 25A#,26#, 27#, 34#, 36#
Sterilization: EO gas / Gamma Radiation
Certificate: CE & ISO
MOQ: 50,000pcs
Packing: 100pcs/box, 5000pcs/ctn, 34*20*17cm
Application: Used for cutting soft tissues in the basic surgical surgery
Product category: Disposable articles for hospitals
Disposable SMS Surgical Gown
Material: PP, PE+PP.SMS or Spunlace non-woven fabric
Color: Blue; Customized
Gram Weight: 40gsm(30-55gsm are available)
Application: Healthcare, Surgical Room and Medical Room
Size: 115*127cm,115*136cm, 115*145cm,130*150cm; Customized
Description:
Key Feature: Soft and light weight material provides long term comfort for long procedures;
Water-repellent, oil-repellent, alcohol repellent, blood repellent and antistatic.
Application:
Healthcare, Surgical Room and Medical Room; Chemical industrial use.
To help prevent contamination between caregivers and patients
Color: Blue; Customized
Gram Weight: 40gsm(30-55gsm are available)
Application: Healthcare, Surgical Room and Medical Room
Size: 115*127cm,115*136cm, 115*145cm,130*150cm; Customized
Description:
Key Feature: Soft and light weight material provides long term comfort for long procedures;
Water-repellent, oil-repellent, alcohol repellent, blood repellent and antistatic.
Application:
Healthcare, Surgical Room and Medical Room; Chemical industrial use.
To help prevent contamination between caregivers and patients
Product category: Disposable articles for hospitals
Reusable Stainless Steel Veterinary injection Needle
1) Made of stainless steel which is reusable .
2)Luer-Lock can be available in square and round Hub and HUB is made from nickle plated brass.
3)Stamp mark on the Hubs and easy to idenfy the gauge size of the needles.
4)Cannula made of stainless steel surgical grade steel, triple bevel sharp point grinding for easy penetration.
5)Thick walled cannula prevent needle point bending during repeated use.
6)Leak proof joint between Hub and cannula prevents cannula come out of Hub during injection.
7)Supplied in plastic box packing of 12 pcs. Different needle bevels or blunt type
8)Different size available, bulk or sterile.
2)Luer-Lock can be available in square and round Hub and HUB is made from nickle plated brass.
3)Stamp mark on the Hubs and easy to idenfy the gauge size of the needles.
4)Cannula made of stainless steel surgical grade steel, triple bevel sharp point grinding for easy penetration.
5)Thick walled cannula prevent needle point bending during repeated use.
6)Leak proof joint between Hub and cannula prevents cannula come out of Hub during injection.
7)Supplied in plastic box packing of 12 pcs. Different needle bevels or blunt type
8)Different size available, bulk or sterile.
Product category: Disposable articles for hospitals
Surgical Silk Tape
Features:
1. With reliable adhesiveness. low sensitization excellent compliance, no residue glue, no harm to skin and air permeability, it enables the skin to breath freely
2. Most are easy-to-tear products, making usage very convenient and comfortable
Application:
Apply to clean and dry skin
When adhesive, please gently press the adhesive tape from center to the two sides
Making it closely combine the skin
Please don't adhere the center of adhesive tape to the wound
1. With reliable adhesiveness. low sensitization excellent compliance, no residue glue, no harm to skin and air permeability, it enables the skin to breath freely
2. Most are easy-to-tear products, making usage very convenient and comfortable
Application:
Apply to clean and dry skin
When adhesive, please gently press the adhesive tape from center to the two sides
Making it closely combine the skin
Please don't adhere the center of adhesive tape to the wound
Product category: Disposable articles for hospitals
Disposable Medical Skin/White High Elastic Bandage
Description:
1.Material: 72% polyester, 28% rubber/ 82% polyester, 18% rubber/ 58% cotton, 25% polyester, 17% rubber
2.Weight: 85gsm, 90gsm, 100gsm, 110gsm, etc.
3.Color: Skin color/natural white
4.Size: length(stretched): 4m, 4.5m, 5m
5.Width:5, 7.5, 10, 15cm
6.Packing: Individually packed in cellophane, 12rolls/PE bag
7.Note: Personalized specifications as possible as customer's request
Indications:
For treatment, after-care and prevention of recurrence of working and sports injuries, after-care of varicose veins damage and operation as well as for therapy of vein insufficiency.
1.Material: 72% polyester, 28% rubber/ 82% polyester, 18% rubber/ 58% cotton, 25% polyester, 17% rubber
2.Weight: 85gsm, 90gsm, 100gsm, 110gsm, etc.
3.Color: Skin color/natural white
4.Size: length(stretched): 4m, 4.5m, 5m
5.Width:5, 7.5, 10, 15cm
6.Packing: Individually packed in cellophane, 12rolls/PE bag
7.Note: Personalized specifications as possible as customer's request
Indications:
For treatment, after-care and prevention of recurrence of working and sports injuries, after-care of varicose veins damage and operation as well as for therapy of vein insufficiency.
Product category: Disposable articles for hospitals
Portable Dental LED CURING LIGHT
Quick Details:
- Product name: LED CURING LIGHT
- Material: metal, plastic, Metal, Plastic
- Size: 295mm*185mm*100mm
- Light Intensity: >1500mw/cm2
- Light Wavelength: 420~480nm
- Power Supply: AC110~220V,50/60Hz
- Usage: Dental
- High-power LED (5W);
- The battery has a large capacity and can be used for 480 times in a single charge;
- The curing time can be adjusted, and the adjustment range is 3-15 seconds;
- The light intensity can be adjusted from P1-P9; 200-1800 MW/cm2;
- The working mode is adjustable, and the modes are optional: strong light, incoming light and pulse;
- Automatic power-on detection function; Show power;
- All aluminum body, durable;
- Equipped with highly permeable glass fiber.
Product category: Disposable articles for hospitals
Disposable Single Use Bone Marrow Trucut Biopsy Needle
Quick Details:
- Product name: Bone Marrow Biopsy Needle
- Size: 11g, 12g, 13g, 11g, 12g, 13g
- Material: Plastic, Stainless Steel 304/ 316
- Length: 80--100mm
- Hub: PC and ABS
- Special Trocar needle and sharp tubing ensure minimal invasion;
- 5 side holes at front end of tubing , multi-way collect bone marrow, more efficient and less pain;
- Human ergonomics handle, comfortable and easy operation;
- Provide one more needle, ensure sharpness and less pain when multi-point invasion;
- Used in human ilium puncture to take myeloid tissue and bone cortex for biopsy.
Product category: Disposable articles for hospitals
Disposable Reusable Ambu Bag Adultes Silicone Manual Resuscitator Oxygen
Quick Details:
- Product name: Silicone Manual Resuscitator Ambu Bag
- Material: Silicone/PVC/SEBS, SiliconeFunction: Emerfgency CareApplication: medical/first aid/breathing system
- It is semi-transparent and come with a pressure limitation valve for patient safty;
- A textured surface ensuring a firm grip and providing effec-tive ventilation. Patient connector is 22/15mm;
- PVC resuscitator conforms to the standard:ISO10651-4:2-002,and it also confoms to council Directive MDD/93/42/ECC concerning Medical Devices;
- For single patient use only.
Product category: Disposable articles for hospitals
AED 7000 Automated External Defibrillator Monitor Medical Desfibrilador Monitor Portatil
Quick Details:
- Product name: Automatic External Defibrillator
- After-sale Service: Return and Replacement
- Energy Sequence: 150, 150, 200J
- Audible Prompts: 22 audible prompts
- Three-step defibrillation process
- Two-button operation
- Extensive voice and visual propts for the operator
- Biphasic energy output
- Lock-out protection to prevent inadvertent defibrillation
Product category: Disposable articles for hospitals
Portable High Accuracy Oxygen O2 Gas Analyser
Quick Details:
- Product name: Oxygen Analyzer
- Feature: Portable Multi 4 Gas Detector
- Function: Measure Gas Purity
- Convenient to use with small size
- The battery is chargeable(3.7V) that is convenient to carry
- Stable performance and high precision
- Economical and practical
Product category: Disposable articles for hospitals
Continuous Blood Glucose Monitoring System Devices
Quick Details:
- Product name: Blood Glucose Monitoring System
- Measuring range: 20-600mg/dL(1.1-33.3mmol/L)
- Measuring time: 5 Seconds
- Assay Method: GOD
- No Coding
- Result in 5 seconds
- 200 - group memoried results
- The average of 7 days, 14 days and 28 days
- Display with large screen, automatic start - up / shut - off
- Temperature adjustment and automatic equalizatio
Product category: Disposable articles for hospitals
Medical Disposable Infusion Pump Portable
Quick Details:
- Product name: Infusion Pump
- Material: plastic, Plastic, Medical grade material
- Volume: 60ml, 100ml,150ml, 200ml, 275ml
- Shell: Soft Shell and Hard Shell Available
- Take out the infusion pump from the sterile package
- Remove the cap from the add-medicine inlet, clip the stopper closed, infuse the prepared medicine by syringe into the liquid bursa stocker
- When adding medicine, please make sure there is no air in syringes, then infuse the medicine. if there is air in bursa, you can turn round and take out all the air( as the bursa can exhaust itself; if there is few air, it can exclude after 1-2 hours later)
Product category: Disposable articles for hospitals
Shandong Qingdao Baby Plastic Oral Dispenser Dosing Syringe
Quick Details：
- Product name: Oral Syringe
- Size: 3ML 5ML 10ML 20ML, 3ML 5ML 10ML 20ML
- Color: Blue, Purple, Yellow, Red , ETC
- Feature: Eco-friendly
- Non-Luer Tip, can not fit with hypodermic needles
- Latex free, medical grade PP
- Transparent barrel, colored plunger
- With tip for recap after use
Product category: Disposable articles for hospitals
Human 32 Dental Tooth Model Medical Teaching/Dental Anatomy Model
Quick Details：
Excellent tool for dental offices for patient's teeth demonstrations and also for legal presentations. Can be used in dental
schools and colleges in educational programs, teeth demonstrations, student study and so on. Helps people better understand the structure and function of teeth, helpful to explain the importance of teeth insertion. Complete teeth model of natural size, great tool for dentists and teeth learners. High quality, not easy to deform, lightweight for convenient demonstration use.
- Product name: Dental Teaching Model
- Material: PVC Material
- Usage: Teaching Demonstration
- Function: Students Understand Human Structure
Excellent tool for dental offices for patient's teeth demonstrations and also for legal presentations. Can be used in dental
schools and colleges in educational programs, teeth demonstrations, student study and so on. Helps people better understand the structure and function of teeth, helpful to explain the importance of teeth insertion. Complete teeth model of natural size, great tool for dentists and teeth learners. High quality, not easy to deform, lightweight for convenient demonstration use.
Product category: Disposable articles for hospitals
BD Blood Collection Additive Tubes EDTA K2/K3 EDTA Accucheck Active Tube
Quick Details：
Used for venous specimen blood collection and separate the serum, it can be used for biochemical, immunological, serological, detection of drug concentration and detection of trace elements, additives sprayed on the serum tube inner wall can prevent blood attach on tube wall. Centrifugation Conditions : After blood coagulation, 10 minutes' centrifugation under 1300g, room temperature 25℃
- Product name: Vacuum Blood Collection Tube
- Tube Size: 13*75mm,13*100mm, 16*100mm
- Color: Red, Blue, Black, Purple...
- Additive: Sodium Citrate, Activator, Clot, EDTA K2/K3...
- Material: PET/Glass
Used for venous specimen blood collection and separate the serum, it can be used for biochemical, immunological, serological, detection of drug concentration and detection of trace elements, additives sprayed on the serum tube inner wall can prevent blood attach on tube wall. Centrifugation Conditions : After blood coagulation, 10 minutes' centrifugation under 1300g, room temperature 25℃
Product category: Disposable articles for hospitals
Medical Paramedic Surgical Bandage Scissor
Quick Details：
- Product name: Bandage Scissors
- Material: Stainless Steel
- Function: Surgery Medical
- Usage: Hospitals, Laboratories
- Bandages, sports tape, gauze dedicated scissors
- Curved tips make it easier to cut tape and bandages,it also can cut canvas, emery cloth, car seat belts
- Widely used in hospitals, homes, factories and car medical boxes
Product category: Disposable articles for hospitals
Low Pressure Coiled CT Connecting Tube Y Shape Connector, Angiography MRI Injection Spiral Patient Extension Tubing
Quick Details：
- Product name: CT Pressure Connector Tube
- Size: 75CM, 120CM, 100CM, 150CM, 200CM, 220CM, 250CM
- Color: Transparent
- Usage: Hospital Medical
- Application: Medical Care
- Is used to transfuse the medicine liquid into Angiography Syringes
- Is used to connect with the monitoring tube and transfuse
Product category: Disposable articles for hospitals
Automatic Blood Lancing Device Bloodet Pen Lancet Pen
Quick Details：
Safety Blood Lancing Device, assist diabetic patients to monitor their glucose levels, easily and safely with an adjustable dial,lancing depth can be set to an appropriate level for the individual . Any standard lancet can be used with these devices, to obtain small blood samples for accurate blood glucose, hemoglobin and other blood components testing.
- Product name: Lancing Device
- Material: Plastic
- Needle tip shape: Tri-bevel
- Application: Blood collection
- Packing: 1pcs/box, 100pcs/ctn
Safety Blood Lancing Device, assist diabetic patients to monitor their glucose levels, easily and safely with an adjustable dial,lancing depth can be set to an appropriate level for the individual . Any standard lancet can be used with these devices, to obtain small blood samples for accurate blood glucose, hemoglobin and other blood components testing.
About us
Company details
All Pro Corporation is founded in 2004 and is the largest exporter of professional healthcare products in Qingdao, China.
We provide a wide range of medical, health science and laboratory products and services to hundreds of partners in more than 130 countries, including: Disposable health and medical supplies, medical equipment, dental products, laboratory supplies, surgeon supplies, medical models, animal care products, health products (GMP certificates), Chinese herbal medicines, biological extracts, capsules, biochemical supplies and instruments, etc.
All our sales and manufacturers operate in strict accordance with ISO 9001 and ISO 13485 standards and requirements. Most of our products are CE and/or FDA certified. We focus on talent, products and marketing, provide first-class products and services, and are committed to becoming China's top medical product supplier.
We provide a wide range of medical, health science and laboratory products and services to hundreds of partners in more than 130 countries, including: Disposable health and medical supplies, medical equipment, dental products, laboratory supplies, surgeon supplies, medical models, animal care products, health products (GMP certificates), Chinese herbal medicines, biological extracts, capsules, biochemical supplies and instruments, etc.
All our sales and manufacturers operate in strict accordance with ISO 9001 and ISO 13485 standards and requirements. Most of our products are CE and/or FDA certified. We focus on talent, products and marketing, provide first-class products and services, and are committed to becoming China's top medical product supplier.