Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
ORTHOS XXI Ltd.
Rua Santa Leocádia, 2735,
4809-012
Guimarães
Portugal
Portugal
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Contact
Vera AMORIM
Please log in
You must be logged in to use matchmaking
Please log in for matchmaking
Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.
Let's get started!
Welcome to Matchmaking. Would you like to get in touch with ?
Visit us
16 Nov 2020
Topic
09:30
ORTHOS XXI - HOSPITAL BEDS AND EQUIPMENT FOR COVID-19
WE WILL BE OK!
The ORTHOS XXI team continues to leave the house to manufacture the equipment needed to help beat this enemy of us all!
At ORTHOS XXI we are aware of the extent of Covid19 and its impact on the health of the population. As manufacturers of Medical Devices, we ensure the continuity of the productive activity, implementing all safety measures and precautions, in order to serve, better than ever, in this battle.
In these 35 years of history, we have had good and bad times but we never gave up, we continue to work together to bring to all of those the needed medical and hospital equipment. We manufacture DM, in accordance with current European standards, also holding ISO 9001.
In this context, we present a selection of our products most necessary to the moment we are living. Our main focus in this selection of products is:
- Offer suitable for IICU Care and Ward, also campaign hospitals
- Bacteriologically immune and easy to desinfect materials
- Practical to use, handle and transport
The ORTHOS XXI team continues to leave the house to manufacture the equipment needed to help beat this enemy of us all!
At ORTHOS XXI we are aware of the extent of Covid19 and its impact on the health of the population. As manufacturers of Medical Devices, we ensure the continuity of the productive activity, implementing all safety measures and precautions, in order to serve, better than ever, in this battle.
In these 35 years of history, we have had good and bad times but we never gave up, we continue to work together to bring to all of those the needed medical and hospital equipment. We manufacture DM, in accordance with current European standards, also holding ISO 9001.
In this context, we present a selection of our products most necessary to the moment we are living. Our main focus in this selection of products is:
- Offer suitable for IICU Care and Ward, also campaign hospitals
- Bacteriologically immune and easy to desinfect materials
- Practical to use, handle and transport
12:00
ORTHOS XXI - REHABILITATION
ORTHOS XXI
WE MANUFACTURE IN PORTUGAL, EUROPE, REHABILITATION EQUIPMENT
- CUSTOMIZATION
- FIT FOR PURPOSE
- USER FRIENDLY
WE MANUFACTURE IN PORTUGAL, EUROPE, REHABILITATION EQUIPMENT
- CUSTOMIZATION
- FIT FOR PURPOSE
- USER FRIENDLY
17 Nov 2020
Topic
08:00
ORTHOS XXI - SMART WALKER, THE AI WALKER FOR SEVERE GAIT DISFUNCTIONS
Smart Walker is an innovative research project developed in Portugal, Europe, aiming at the creation of multifunctional walker which allows, on one hand, to improve stability and pathological gait, and on the other hand, allows for therapists to use the walker as a tool to monitor the patient´s condition, to make it an effective and smart rehabilitation tool!
This project was developed in cooperation between ORTHOS XXI, Minho University and other partners, check up a summary in the link:
https://www.youtube.com/watch?v=BvgU0wdweQ0&t=6s
This project was developed in cooperation between ORTHOS XXI, Minho University and other partners, check up a summary in the link:
https://www.youtube.com/watch?v=BvgU0wdweQ0&t=6s
18 Nov 2020
Topic
09:00
ORTHOS XXI - GERIATRICS
Orthos XXI is a manufacturer and distributor of orthopaedic material and medical and hospital devices located in Portugal, Europe, with 35 years experience.
Our aim is to improve the quality of life of users of our equipment, mainly disabled and reduced mobility people.
We have a wide range of own manufactured products (hospital and nursing home beds and other hospital equipment, wheelchairs, walking aids, hoists, etc.); complemented with some products we distribute, thus offering a wide catalogue in the medical and orthopaedic sectors.
Our offer is presented in 10 brands and GERIATRICSis a long time developed one!
We manufacture nursing homes and home care beds and associated equipment (overbed tables and bedside cabinets,) along with other equipment for the care of patients in institutions, such as medicine and examination trolleys. we offer the possibility to fully customise our products to suit the institutions needs.
Our aim is to improve the quality of life of users of our equipment, mainly disabled and reduced mobility people.
We have a wide range of own manufactured products (hospital and nursing home beds and other hospital equipment, wheelchairs, walking aids, hoists, etc.); complemented with some products we distribute, thus offering a wide catalogue in the medical and orthopaedic sectors.
Our offer is presented in 10 brands and GERIATRICSis a long time developed one!
We manufacture nursing homes and home care beds and associated equipment (overbed tables and bedside cabinets,) along with other equipment for the care of patients in institutions, such as medicine and examination trolleys. we offer the possibility to fully customise our products to suit the institutions needs.
13:30
ORTHOS XXI - LET'S PLAY! LET'S ENJOY THE OPEN!
ORTHOS XXI supports adapted sports!
Take a peak at some of our latest productions!
Going to the beach and enjoying the seashore is a dream come true with our SPLASH wheelchair!
Made in UV resistant and water tight materials, 4 wheels suitable for sand and dunes, Splash is now available in 3 sizes.
The attraction of the sea draws us to the waters! Our ADAPTED PADDLE chair allows daring, fun and safe in this growingly popular sport!
Made in stainless steel and UV resistant materials, suitable for adapted Paddle Boards.
Inclusive football is a team sport now re-invented for adults and children!
FOOTBALL INCLUSIVE WHEELCHAIR is prepared for Foothand, each chair is adjustable for 3 sizes.
These products were developed in cooperation with partners to promote adapted sports and the enjoyment of nature.
ORTHOS XXI, We are Inclusive!
Take a peak at some of our latest productions!
Going to the beach and enjoying the seashore is a dream come true with our SPLASH wheelchair!
Made in UV resistant and water tight materials, 4 wheels suitable for sand and dunes, Splash is now available in 3 sizes.
The attraction of the sea draws us to the waters! Our ADAPTED PADDLE chair allows daring, fun and safe in this growingly popular sport!
Made in stainless steel and UV resistant materials, suitable for adapted Paddle Boards.
Inclusive football is a team sport now re-invented for adults and children!
FOOTBALL INCLUSIVE WHEELCHAIR is prepared for Foothand, each chair is adjustable for 3 sizes.
These products were developed in cooperation with partners to promote adapted sports and the enjoyment of nature.
ORTHOS XXI, We are Inclusive!
Our range of products
Product categories
- 01 Electromedical equipment / medical technology
- 01.09 Hospital equipment, care equipment
- 01.09.01 Patient room furniture, patient room equipment
Patient room furniture, patient room equipment
- 01 Electromedical equipment / medical technology
- 01.09 Hospital equipment, care equipment
- 01.09.02 Patient beds and nursing beds
Patient beds and nursing beds
- 1 Hospital Bed PRIDE PLUS
- 1 Paediatric Bed MINI VICTORY
- 1 Hospital Bed PRIDE ADVANCE
- 1 Nursing Bed VICTORY MANUAL - ROSE
- 1 Nursing Bed TRIUMPH PLUS VICTORY
- 1 VICTORY Couch and Stretcher
- 1 Nursing Electric Bed TRIUMPH PLUS MISTERY
- 1 Nursing Electric Bed VICTORY VIOLET
- 1 Nursing Manual Bed VICTORY VIOLET
- 1 Nursing Bed HI-LO FANTASY
- 1 Nursing Electric Bed ALZHEIMER
- 1 Hospital Bed VICTORY HO HPL
- 1 Hospital Bed VICTORY HO ABS
- 1 Hospital ICU Bed EUPHORIA
- Nursing Hi-lo Bed VICTORY CHAMELIA
- 01 Electromedical equipment / medical technology
- 01.09 Hospital equipment, care equipment
- 01.09.03 Patient lifting systems
Patient lifting systems
- 01 Electromedical equipment / medical technology
- 01.09 Hospital equipment, care equipment
- 01.09.15 Other equipment for hospital and care
Other equipment for hospital and care
- 1 Aluminium Bath/Shower Chair INDIAN
- 1 Stainless steel Bath/Shower Tilt in Space Chair BALTIC
- 1 SHOWER TROLLEY
- 1 Aluminium Bath/Shower Chair ATLANTIC
- 1 Stainless steel Bath/Shower Chair ANTARCTIC
- 1 Stainless steel Bath/Shower Chair ARCTIC
- 1 Aluminium Bath/Shower Chair ADRIATIC
- 1 Aluminium Bath/Shower Chair PACIFIC
- 1 Relax Couch SAVANNAH PLUS
- 1 Relax Couch EXÓTICO
- 1 Couch BOLINÊS
- 1 MEDICATION TROLLEY
- 1 MEDICAL SCREEN
- 1 Examination Couch VICTORY ELECTRIC/HYDRAULIC
- 1 HYDRAULIC STRETCHER
- 1 DRESSING TROLLEY
- 1 PARALLEL BARS
- 1 BATH IN BED SOLUTION - SHOWERCARE
- 04 Physiotherapy / orthopaedic technology
- 04.04 Walking and mobility aids
Walking and mobility aids
- 04 Physiotherapy / orthopaedic technology
- 04.12 Rehabilitation equipment and devices
Rehabilitation equipment and devices
- 04 Physiotherapy / orthopaedic technology
- 04.16 Wheelchairs
Wheelchairs
- 1 Manual Wheelchair CELTA COMPACT 3
- 1 Positioning Tilt in Space Wheelchair CARIBE
- 1 Aluminium Manual Wheelchair LATINA COMPACT
- 1 Aluminium manual wheelchair LATINA
- 1 Power Wheelchair VICKING SUSPENSION
- 1 Paediatric Tilt in Space Frame DORY
- 1 Paediatric Wheelchair LILIPUT
- 1 Paediatric Wheelchair LILIPUT LIGHT
- 1 Power wheelchair AZTECA
- 1 Paediatric Tilt in Space Wheelchair DORY
- 1 Lightweight Wheelchair ATIVA SIOUX
- 1 Lightweight wheelchair ATIVA INVICTUS
- 1 Manual Wheelchair MAIA
- 1 Manual Wheelchair CELTA
- 1 Manual Wheelchair CELTA BED
Our products
Product category: Patient beds and nursing beds
1 Hospital Bed PRIDE PLUS
PRIDE PLUS Hospital bed specifically conceived for use in environments with high bacteriological risk, with materials resistant to disinfection.
Steel frame with epoxy paint. Articulated bed of 4 sections (fixed pelvic section and 3 articulated sections), in ABS, with holes for ventilation of the mattress. Self-regression of the back section to avoid abdominal compression during the articulation of the bed. Headboards and footboards in ABS, easily detachable. Protection stops in the 4 corners of the bed. 125mm wheels with brake. Electrical articulation of the back and legs. Mechanical rack for the actuation of the feet section.
Mechanical CPR with actuation on both sides of the bed. Emergency battery. Structure prepared for different configurations. It allows to attach different accessories. Compatibility with other equipment (eg hoists). Robust and resistant materials to the disinfection recommended in hospital environment. Available model with fixed height (PRIDE PLUS), with bed elevation (PRIDE PLUS ELEV) and with elevation, Trendelenburg and reverse (PRIDE PLUS TREN).
Maximum user weight: 225kg. Safety work load: 310Kg. Possibility of manufacturing by measure.
Steel frame with epoxy paint. Articulated bed of 4 sections (fixed pelvic section and 3 articulated sections), in ABS, with holes for ventilation of the mattress. Self-regression of the back section to avoid abdominal compression during the articulation of the bed. Headboards and footboards in ABS, easily detachable. Protection stops in the 4 corners of the bed. 125mm wheels with brake. Electrical articulation of the back and legs. Mechanical rack for the actuation of the feet section.
Mechanical CPR with actuation on both sides of the bed. Emergency battery. Structure prepared for different configurations. It allows to attach different accessories. Compatibility with other equipment (eg hoists). Robust and resistant materials to the disinfection recommended in hospital environment. Available model with fixed height (PRIDE PLUS), with bed elevation (PRIDE PLUS ELEV) and with elevation, Trendelenburg and reverse (PRIDE PLUS TREN).
Maximum user weight: 225kg. Safety work load: 310Kg. Possibility of manufacturing by measure.
Product category: Patient beds and nursing beds
1 Paediatric Bed MINI VICTORY
MINI VICTORY, specially developed for paediatric use with compact dimensions. Electric bed with robust steel frame and epoxy paint. With 4 section mattress support with 3 articulated planes and 1 fixed, through low tension motors. Fiber polymer slats, for an effective disinfection. Electric system for height adjustment. MDF wood exterior available in pleasing and colourful tones. Also available model with fixed height, with 4 legs with wheels and brake.
Product category: Patient beds and nursing beds
1 Hospital Bed PRIDE ADVANCE
PRIDE ADVANCE, hospital bed specifically designed for use in environments with high bacteriological risk, with materials resistant to disinfection. Steel frame with epoxy paint. Articulated bed of 4 planes (fixed pelvic section and 3 articulated sections), in ABS, with holes for ventilation of the mattress. Self-regression of the back section to avoid abdominal compression during the articulation of the bed. Headboards and footboards in ABS, easily detachable. Protection stops in the 4 corners of the bed. 125mm wheels with brake. Electric articulation of the back and legs by independent motors, through electric control with helical cable. Mechanical rack for the actuation of the feet section. Bed lift system and functions of Trendelenburg and reverse. Mechanical CPR with actuation on both sides of the bed. Supervisory control with functions of Fowler, semi-Fowler, cardiac chair, auto caregiver and bed output, electric CPR and function lock. Emergency battery. Power failure alarm. Structure prepared for different configurations. It allows to attach different accessories. Compatibility with other equipment (eg hoists). Robust and resistant materials to the disinfection recommended in hospital environment. Fireproof material. Maximum user weight: 225Kg. Safety load: 310Kg. Possibility of manufacturing by measure.
Product category: Patient beds and nursing beds
1 Nursing Bed VICTORY MANUAL - ROSE
VICTORY, manual bed recommended for environments with medium or high bacteriological risk, like clinics, geriatric residencies and palliative care. With steel structure 60x30x1,5mm with epoxy paint. 4-section mattress support with 3 articulated sections and 1 fixed, with fiber slats for easy disinfection. Independent manual articulation of the back and legs, through 2 retractable crancks in steel of high resistance. Rose headboards and footboards with metal ring, beech colour. Option: fixed mattress support without articulation. Structure prepared for application of serum support and lifting pole. Legs with 100mm wheels. Modular design, this model allows the bed to easily convert from manual to electric or from fixed height to adjustable height through scissor or double H elevator. Maximum user weight: 195Kg. SWL: 230Kg. Possibility of manufacturer by measure.
Product category: Patient beds and nursing beds
1 Nursing Bed TRIUMPH PLUS VICTORY
TRIUMPH PLUS, electric bed recommended for environments with medium/high bacteriological risk, such as clinics, geriatric residences and palliative care. With steel structure 60x30x1,5mm with epoxy paint. 4-section Victory mattress support with 3 articulated sections and 1 fixed, with fiber polymer slats for easy disinfection. Robust and attractive Triumph Plus headboards and footboards with integrated motors for height adjustment. Electric articulation of the back and legs, through low voltage motors. Motors hidden in the headboard and footboard. Solid beech side guards. Bottom space completely free for easy access from hoists or other devices. Structure prepared for application of serum support and lifting pole. Optional: Trendelemburg and reverse. Maximum user weight: 195Kg. SWL: 230Kg.
Product category: Rehabilitation equipment and devices
1 STANDER BOB
BOB is an adjustable electric tilting stander that allows to go from the horizontal to the vertical position through electric control, allowing to assume the prone position. With trunk and pelvis section adjustable in height and depth through central column, this stander also allows several independent adjustments to the knee and foot supports. With abduction function (optional) for each leg until 40º (totalizing 80º), individual adjustable with adjustments to 5º in 5º. Angle and height-adjustable activity tray (optional). Headrest 100% adjustable (optional). Double containment belts for better safety. Several accessories available. Also available manual version. Possible to convert in supine position (need headrest).
Product category: Rehabilitation equipment and devices
1 TILT TABLE FLINTSTONE
FLINTSTONE, electric tilting table, allows to go to the vertical position starting from the horizontal position, through the simple actuation of an electric control. Bipartite structure with 2 padded and adjustable bodies with straps. With a 6cm thick padding in viscoelastic foam, for greater user comfort. Adjustable footrest in depth with holes for sandals (optional). Coated vinyl fabric available in various colours. It has the added value of owning a battery, being able to be used in any space. Battery easily detachable. Wide range of accessories available (eg head support, armrest, tray).
This stander acts as a marquise of treatments and simultaneously allows to assume the vertical position, with all the benefits that this position provides at the circulatory, digestive and respiratory level.
This stander acts as a marquise of treatments and simultaneously allows to assume the vertical position, with all the benefits that this position provides at the circulatory, digestive and respiratory level.
Product category: Walking and mobility aids
1 TRADITIONAL CRUTCHES
Aesthetic, durable, light, silent, are the characteristics of Orthos Walking Aids crutches. C1, adult crutches with fixed open cuff or C8, adult crutches with mobile and closed cuff. With modern design y verifiable enduring, they are light due to components optimisation and to the aluminium’s quality. Reduction of noise through an inner nylon component. High resistance. With 20mm anti slip rubber tips for safety. Natural or champagne tube colour. Height adjustable. Models with double adjustment for taller users. Reinforcable for users up to 125kg. Option: model C7 in chrome steel tube with soft mobile cuff.
Product category: Walking and mobility aids
1 MOULDING CRUTCHES
COMPLETE MOULDING CRUTCHES, lightweight, innovative and attractively designed. The complete moulding crutches combine new technology and materials to provide greater comfort and functionality. In aluminium tube of high resistance and low weight. Silent, with 20mm non-slip tips for added safety. Soft handle with reflector, fixed (C1) or mobile (C8). With height adjustment in the lower zone. Possibility to apply an extender for taller people. Standard model with no shock absorber or extremely comfortable shock absorber that reduces impact forces and helps protect the joints, especially the shoulder joint. Tube in natural or black aluminium (black tube only for model with black handle). Complete moulding in black, blue, red, green or yellow.
Product category: Rehabilitation equipment and devices
1 Positioning Tilt in Space Frame TUPI
TUPI is a rigid frame for use with multiple seating systems. Available with different options of seat and back interfaces, with various adjustments options. With structure made of steel, it provides stability, robustness and safety. Tilt-in-space frame up to 45º, easy to handle through gas spring, helps pressure redistribution. Mechanic reclining backrest provides comfort. Push handles height adjustable. Armrests height and depth adjustable, with multiple pads available. Various footrests options. Anti-tippers.
Product category: Walking and mobility aids
1 Walker A1 & A2
Fixed, non-articulated, low weight aluminum WALKER. Recommended for users with difficulty of locomotion, facilitates the realization of march with security. Available in two sizes, A1 and A2 (smaller size, A2, for children and adults up to 1.50m). Height adjustable from 880mm to 980mm (model A1) and from 790mm to 890mm (model A2), allows the user to adapt correctly to the height. With non-slip ends for added safety.
Product category: Walking and mobility aids
1 Walker A3
Articulated walker in aluminium, with 2-level handles. The lower level handle makes it easy to lift independently and gradually. It has the features of a fixed walker and the added value of the articulation. Allows to be fixed when required through an existing manual device. Folding for better storage. Height adjustable from 890mm to 990mm. With non-slip rubber tips for added safety.
1 Manual Wheelchair CELTA COMPACT 3
CELTA COMPACT 3 is a manual wheelchair made of steel with a sturdy and functional structure. Indicated for users with general mobility impairment, it is a sturdy chair, practical to use on a day-to-day basis and, moreover, economical. Reinforced structure with tubes of 25mm in diameter and triple cross for greater robustness. Blue structure and black upholstery. Detachable armrests. Detachable and adjustable in height footrests. Fire-resistant upholstery according to EN 1102: 1995. Massive 600mm rear wheels, with nylon wheel. Option: rear traffic wheels (300mm), in cases where the user is not able to propel the wheelchair. Solid 200x30 front wheels. Robust and lightweight structure with only 14,6kg (total weight). Seat width: 400, 430 or 460mm. Maximum user weight: 150Kg.
1 Positioning Tilt in Space Wheelchair CARIBE
CARIBE, is a wheelchair adjustable to the user's needs, providing various adjustments at the seat and backrest level. Indicated for users with reduced mobility who need good postural support and frequent position changes in order to compensate for situations of respiratory, circulatory and joint difficulties. Steel positioning chair, with pneumatic tilt (0º to 30º or -5º to 25º) and recline (89º to 114º or 96º to 120º). Rigid backrest adjustable in height, with Comfort Back Lateral PU cushion. Rigid seat adjustable in depth (from 400mm to 500mm) and width (50mm through the armrests) with ComfortSeat PU cushion. Various options available for seat and backrest cushions. Armrests "T" shape, adjustable in height and width (50mm) with large cushion. Elevating footrests height adjustable and with depth adjustment (50mm). Equipped with 300mm or 600mm solid rear wheels and 200mm solid front wheels. Adjustable and removable anti-tip wheels. For more configuration options and accessories consult the order form.
Product category: Walking and mobility aids
1 Walker A4
Articulated walker in aluminium. It has the features of a fixed walker and the added value of the articulation. This walker is intended for users with walking and balance difficulties, allowing safe walking. This provides a more functional and physiological gait. Very versatile, it allows to be fixed when required through an existing manual device. Folding for better storage. Height adjustable from 820mm to 920mm. With non-slip rubber tips for added safety.
Product category: Walking and mobility aids
1 Walker A6
Designed for users with limited mobility, the A6 WALKER allows safe and continuous gait (with wheels, no need to stop to lift and move the walker). In aluminum, it is very practical and compact and is designed for the comfort and mobility of the user. Folding structure (stands up even when closed). Height adjustable anatomical handles from 79cm to 89cm. Interior wheels for easy passage in narrow spaces. Non-slip tips for added safety.
1 Aluminium Manual Wheelchair LATINA COMPACT
LATINA COMPACT, a compact and lightweight aluminium wheelchair with triple cross bar. White or grey structure and black upholstery. Upholstery colour options: lilac, pistachio, dark green and cream (additional cost). Folding armrests. Detachable and height adjustable footrests. With quick release Ø600mm (spokes rims) and Ø300mm (transit) wheels. Seat width: 400,430,460mm. Maximum user weight: 125Kg.
1 Aluminium manual wheelchair LATINA
LATINA, a lightweight aluminium chair with triple cross bar and an attractive design. With structure in white or grey and upholstery in black. Upholstery with optional colors: lilac, pistachio, dark green and cream. Folding armrests (option: detachable) and footrests adjustable in height and detachable. In 5 sizes, with 600mm pneumatic or solid rear wheels with quick release system for easy transport and storage. Options 300mm wheels (transit). Solid 200mm front wheels. Seat width: 370, 400, 430, 460, 500mm. Maximum user weight: 125Kg.
Product category: Patient beds and nursing beds, Rehabilitation equipment and devices
1 VICTORY Couch and Stretcher
VICTORY, examination couch conceived for observation and treatment. With bipartite structure in painted steel with epoxy paint finish. Removable for easy storage. Fixed height in 3 positions, by adjusting the position of the legs. Padded bed in foam coated with nappa. Articulated headboard with hole for face placement. With paper roll holder. Coating available in various colours.
1 Power Wheelchair VICKING SUSPENSION
VICKING SUSPENSION, power wheelchair, fully adjustable, designed for outdoor use, with integrated suspension system. Due to its compact dimensions, it can also be used indoors. Robust steel structure. It guarantees the correct positioning and security of the user. With right hand control (standard), it can be placed on the left. Back with tensioning straps with 3D cover. Modular seat composed of rigid plates continuously adjustable in width (from 400 to 500mm) and in depth (from 400 to 500mm), with Comfort Seat 3D cushion. Mechanical recline and electric tilt (other options available). Armrest “T” shape adjustable in height and depth, detachable, with large pad. Footrests with bilateral opening, height and depth adjustment. Pneumatic rear wheels 350mm and front 200mm. Anti-tip wheels. Batteries AGM 12V 50Ah without maintenance. 300W motors. Autonomy 30Km. Maximum speed 8Km/h, under normal floor conditions and user weight. Various configuration options and accessories (see order form).
Product category: Other equipment for hospital and care
1 Aluminium Bath/Shower Chair INDIAN
INDIAN, economic chair with sanitary function and for bath. Conceived for users with slight difficulties, it allows to take a seated bath and can even be used as an alternative to the raised toilet seat, having the added value of owning fixed arms for greater support. Structure in aluminum, resistant to oxidation. Seat height adjustable from 48 to 52cm. With sanitary seat in ABS (also available only structure). Easy cleaning and disinfection.
Product category: Other equipment for hospital and care
1 Stainless steel Bath/Shower Tilt in Space Chair BALTIC
BALTIC is the new bath and sanitary chair for adults with significant motor disabilities, such as paraplegia and tetraplegia. Tilt in space, easy to act by the caregiver, it promotes comfort and safety for the user, including users with poor trunk control. Robust stainless steel frame, anti-corrosion and high durability. Comfortable and detachable mesh back, easy to clean. Anatomical seat in integral skin, with opening and wedge. Removable bucket. Headrest height, depth and angle adjustable. Stainless steel gas pumps for tilt in space, actuated by handles. Seat height adjustable (10cm) for easy transfers. Foldable armrests. Detachable and height adjustable legrests. With 100mm wheels, all with brakes. Cleaning and disinfection resistant materials.
1 Paediatric Tilt in Space Frame DORY
DORY is a paediatric tilt-in-space growth frame. Adaptable to growing needs, it is compatible with various positioning systems and accessories. Tilt function up to 45º actuated in the handles, assists in pressure relief as well as maintaining posture. The frame has a brace bar that guarantees the similar actuation of both tilt actuators. Optional rigid seat and back easily detachable (without tools). Height, depth and width adjustable armrests. Height adjustable, foldable and detachable legrests. 300mm pneumatic quick release rear wheels and 200mm solid front wheels. Removable and height adjustable anti-tippers. Aluminium frame available in 2 versions: Foldable Dory (with cross bar to allow the chair to be closed; this feature associated with the lightweight frame is a good option when you need to store the wheelchair in the car or in small places) and Fixed Dory (it maintains all growth characteristics, however the frame is not foldable). Other configurations available – see order form.
1 Paediatric Wheelchair LILIPUT
LILIPUT, paediatric wheelchair in steel, with modern and appealing design. Structure in light green, upholstery in red. With triple cross bar, detachable armrests and detachable and height adjustable footrests. Available with 550mm or 300mm solid rear wheels (LILIPUT TRANSIT) and 150mm solid front wheels. The rear transit wheels (300mm) are indicated when the user is not able to propel the chair. Suitable for children with reduced mobility. Foldable frame for easy transport and storage. Seat width: 31, 34, 37cm. Maximum user weight: 125Kg. Various accessories and other configurations available.
Product category: Other equipment for hospital and care
1 SHOWER TROLLEY
HYDRAULIC SHOWER TROLLEY, designed to facilitate the hygiene of bedridden people, with the greatest comfort and safety. Especially recommended for institutional use. With epoxy painted steel structure, with anti-corrosion treatment. Bath with phenolic resistant base and user support surface in thermo-welded PVC protected foam. Variable height from 450 to 800mm, via pedal. It has 4 125mm wheels with integrated brake. Stainless steel folding handrails. Water drainage hose with support clip at the bottom of the plane. Available also model with structure in stainless steel, with superior resistance to oxidation. Centralized brake option. Function option for Trendelemburg and anti-Trendelemburg.
1 Paediatric Wheelchair LILIPUT LIGHT
LILIPUT LIGHT, aluminum pediatric wheelchair, ideal for active children. Attractive and modern design. Structure in white, with upholstery in color (options: pink, blue, pistachio, red). With triple cross bar, detachable armrests and detachable and height adjustable footrests. Available with 550mm or 300mm solid rear wheels (LILIPUT LIGHT TRANSIT) and 150mm solid front wheels. The rear traffic wheels (300mm) are indicated when the user is not able to propel the chair. Foldable frame for easy transport and storage. Seat width: 310, 340, 370mm. Maximum user weight: 125Kg. Various accessories (eg, sideguard and trays) and other configurations available.
1 Power wheelchair AZTECA
AZTECA, power wheelchair for indoor and outdoor use. With compact dimensions and foldable structure, facilitating the storage and transport. Manual control on the right (standard) or on the left. Detachable armrests. Footrests detachable, foldable and height adjustable. The basket that supports the batteries is detachable allowing to close the chair to occupy less space during the transport. It is possible to disconnect the electrical system and operate the chair manually, through a handle located near the batteries. The compact dimensions allow a good manoeuvrability (radius of rotation of 920mm). Pneumatic wheels at the front and rear to decrease the impacts and thus ensure a more comfortable ride. With anti-tip wheels. It also has a memory foam seat with anatomical shape. Maintenance-free AGM gel batteries 12V and 38Ah, placed in two boxes to divide the weight to be easier to remove from the chair. 24V and 5A battery charger. Motor with power of 200W. Autonomy of 25km, maximum forward speed of 6Km/h and in reverse of 3Km/h, under normal floor conditions and user weight. Maximum user weight: 125Kg.
Product category: Other equipment for hospital and care
1 Aluminium Bath/Shower Chair ATLANTIC
The bath and sanitary chair ATLANTIC is a "2 in 1" model: made of materials that allow the use in the bath (structure in anodized aluminum, with high resistance and durability, its composition prevents oxidation in the presence of humidity), has bucket and seat with opening for sanitary use. It has as added value the existence of folding armrests in order to facilitate the transfers. Bilateral opening footrests, detachable and foldable in and out. Allows direct use of the chair over the toilet, or use through the bucket. The bucket stands out for its width and depth, preventing leaks. Easy to clean and disinfect. With two seat types available: seat in "skin integral polyurethane", extremely comfortable, anatomically shaped, rear wedge opening and lid; or ABS seat with front or rear opening. There are two models available: (1) model with four 100mm castors, with 2 brakes; or (2) model with two 100mm castors and 600mm rear wheels, with brake. A product that will facilitate the day-to-day of the user and caregivers, as it helps to avoid going to the bathroom at night and helps in the trips to the bath, reducing the number of transfers made.
Product category: Patient lifting systems
1 Transfer Hoist ECLIPSE 135/150/180
ECLIPSE transfer hoists provide a comfortable transfer from a bed, chair or even the floor. The base legs, equipped with 100mm double resistant wheels (2 with brake), are opened by a lever to simplify front access in total stability and safety. Small wheels allow easy hoist entry under a bed. Easy to manoeuvre in small spaces and narrow aisles. Mounts in less than 1 minute. The arm movement is guaranteed by an electric actuator, equipped with a safety system in case of power failure, emergency button and mechanical anti-panic lowering. Powered by 2 batteries 12V 2,9Ah each, with autonomy up to 40 cycles. Maximum user weight: 135Kg (Eclipse 135); 150Kg (Eclipse 150), 180kg (Eclipse 180/180 Plus) and 220Kg (Eclipse 220). Models Eclipse 180Plus and Eclipse 220 with 10.000N electrical system and detachable battery. Other options and configurations: electric foot opening, 4 point sling hook, scale, 150Kg model with actuation by hydraulic system, additional battery for models Eclipse 180Plus and Eclipse 220.
Suitable for transfers to and from bed, chair, bath or even floor, it can be used by patients with amputation, paraplegia, tetraplegia, among other conditions, by applying the most suitable transfer slings. Note: slings purchased separately.
Suitable for transfers to and from bed, chair, bath or even floor, it can be used by patients with amputation, paraplegia, tetraplegia, among other conditions, by applying the most suitable transfer slings. Note: slings purchased separately.
Product category: Other equipment for hospital and care
1 Stainless steel Bath/Shower Chair ANTARCTIC
ANTARCTIC, bath and toilet chair, with stainless steel structure anti-corrosion and high resistance and durability for intensive use. Bilateral opening footrests, detachable and foldable in and out. Folding armrests in order to facilitate the transfers. Allows direct use of the chair over the toilet, or use through the bucket. The bucket stands out for its width and depth, preventing leaks. Easy to clean and disinfect. With two seat types available: seat in phenolic resin with anterior wedge opening, with exceptional strength and durability and phenolic back; or ABS seat with front or rear opening and waterproof back. Available with four 125mm castors (two with brakes). Designed for persons with mobility problems, it can be used for bath and toilet, safely and with maximum comfort. Its bacteriologically immune materials make it suitable for hospital use.
Product category: Other equipment for hospital and care
1 Stainless steel Bath/Shower Chair ARCTIC
ARCTIC is a foldable bath and toilet wheelchair, with stainless steel structure anti-corrosion and high resistance and durability. It has bucket and seat with opening for sanitary use. Detachable footrests and folding armrests make it easy to use. Easy to clean and disinfect. With comfortable anatomic integral skin seat with wedge opening and lid. May be used directly or with bucket. Foldable structure makes it easy to storage. Available in 2 models: (1) with two 100mm castors and 600mm wheels with brake or (2) with four 100mm castors (two with brakes). A product that will facilitate the day-to-day of the user and caregivers, as it helps to avoid going to the bathroom at night and helps in the trips to the bath, reducing the number of transfers made.
Product category: Patient lifting systems
1 BARIATRIC HOIST ECLIPSE XXL 300
ECLIPSE XXL is a transfer hoist that provides a comfortable transfer from a bed, chair or even the floor, with the maximum space for users. The base, equipped with 120mm dual- wheels (two with brake), are opened by a lever to simplify front access, with total stability and safety. The movement of the arm is ensured by an electric actuator, equipped with a safety system. In case of power failure, it is powered by two 24v batteries, with buttons to increase and decrease the control and the automatic emergency brake. Maximum user weight 300Kg. There are several types of harnesses available.
Designed to facilitate transfers with maximum safety and comfort for both the user and the caregiver. Suitable for transfers to and from bed, chair, bath or even floor, it can be used by patients with amputation, paraplegia, tetraplegia, among other conditions, applying the most suitable transfer slings.
Designed to facilitate transfers with maximum safety and comfort for both the user and the caregiver. Suitable for transfers to and from bed, chair, bath or even floor, it can be used by patients with amputation, paraplegia, tetraplegia, among other conditions, applying the most suitable transfer slings.
Product category: Other equipment for hospital and care
1 Aluminium Bath/Shower Chair ADRIATIC
The bath and toilet chair ADRIATIC is a "2 in 1" model: made of materials that allow the use in the bath (aluminum structure, with high resistance and durability, its composition prevents oxidation in the presence of humidity), it includes bucket and seat with opening for sanitary use. Flip up armrests facilitate transfers and avoid loose parts. With height adjustable “swan neck” footrests detachable and foldable (option: bilateral opening footrests detachable and foldable in and out and height adjustable). Allows direct use of the chair over the toilet, or use through the bucket. The bucket stands out for its width and depth, preventing leaks. Easy to clean and disinfect. Seat made of molded “Integral Skin polyurethane", extremely comfortable, anatomically shaped, rear wedge opening and lid. As option, the seat may be made of ABS (with front or rear opening). Model with four 100mm castors, with 2 brakes. Detachable backrest for easier transport and storage (optional: detachable backrest with handles). A product that will facilitate the day-to-day of the user and caregivers, as it helps to avoid going to the bathroom at night and helps in the trips to the bath, reducing the number of transfers made.
Product category: Patient lifting systems
1 STAND UP HOIST ECLIPSE 150
ECLIPSE STAND UP 150 specially designed for users who still have some lower limb strength, this hoist enables transfer from any type of seat or wheelchair. It allows to stand up the user, facilitating activities such as diaper changes, intimate hygiene or even going to the bathroom. It offers great stability and it is easy to use. Removable into two parts. Its dimensions allow it to be used in narrow spaces, in hospital environment, geriatric institutions or even in the house, under the total control of the caregiver. The base legs open through a lever to facilitate front access to the wheelchair or sofa. Equipped with double Ø100mm wheels (2 with brake), it allows easy entry of the hoist under the bed. Electric actuator, 1500N, speed 13mm/s, equipped with safety system in case of power failure, with two 24V batteries and emergency button. Chest sling included. Maximum user weight: 150Kg.
Product category: Patient lifting systems
1 SLINGS for Transfer Hoists
SLINGS for use in transfer hoists. Designed to meet the needs of the user due to their pathology, mobility potential and type of transfer. Suitable for transfers to and from bed, chair, bath or even floor, it can be used by patients with amputation, paraplegia, tetraplegia, among other conditions, by applying the most suitable transfer slings. With three types of different finishes: Quilted and Comfort line for transfer of bed and chair; Washable PVC bath line for transfers to the bathroom. Available in 4 formats: dorsal harness (size S to XXL), harness with head support (Tetraplegic) (size S to XXL), harness with a thoracic band (single size) and amputee harness (size M and L). Its constitution allows for maximum user comfort. The headrest models contain additional reinforcement, with high strength longitudinal bands. Possibility of making other sizes.
Product category: Patient room furniture, patient room equipment
1 Bedside table ABS
Designed for hospital use in environments with high bacteriological risk. Easy cleaning and disinfection structure with rounded corners, no edges. Upper and lateral structure in ABS, with doors and drawers in phenolic resin. With drawer and cupboard with bottom shelf, the bottom is ventilated to evacuate odors. Top cup holder. Top tray with anti-spill collar, adjustable in height and swivel. With four wheels, two with brakes. Shock protection stops in the 4 corners of the table. Depending on the configuration selected, the table can have single front or double front. The double front allows access to the drawer and cabinet on both sides, and can be used to the left or right of the bed. The bedside table can be purchased independently from the bed board or, alternatively, as a single structure. Collapsible tray (optional).
Product category: Patient lifting systems
1 Transfer Device EASY TRANSFER
EASY TRANSFER is an easy-to-use day-to-day transfer device. Designed for everyday needs, such as the transfer of the bed to the bathroom, it allows the user to move safely and effortless. The seat rotates to facilitate the entry. With foot support and padded knee support. Handles for user and handles for the attendant. With 4 wheels, 2 with brakes. Due to the compact dimensions, it can easily be used at home, but is also an excellent solution for institutional use, helping to prevent the appearance of injuries in caregivers. Easy Transfer comes in 3 versions:
Easy Transfer Compact (fixed 5-wheels base), Easy Transfer with opening legs, Easy Transfer with opening legs and stand up assist.
Easy Transfer Compact (fixed 5-wheels base), Easy Transfer with opening legs, Easy Transfer with opening legs and stand up assist.
Product category: Patient room furniture, patient room equipment
1 Bedside table HPL
Designed for hospital use in environments with high bacteriological risk. Easy cleaning and disinfection structure with rounded corners, no edges. Made in HPL (phenolic compact). Robust and durable structure. With four wheels, two with brakes.
Product category: Patient room furniture, patient room equipment
1 Overbed table ABS
OVERBED TABLE, design for use in environments with high bacteriological risk, with materials resistant to disinfection. Steel frame with epoxy paint, adjustable in height. Tray in HPL, adjustable in inclination. Four wheels, two with brakes.
Product category: Patient room furniture, patient room equipment
1 Overbed table HPL
OVERBED TABLE, design for use in environments with high bacteriological risk, with materials resistant to disinfection. Steel frame with epoxy paint, adjustable in height. Tray in HPL, adjustable in inclination. Four wheels, two with brakes.
Product category: Patient room furniture, patient room equipment
1 Transport Chair ORIENTAL
ORIENTAL, reclining chair designed for use in a clinical, hospital and institutional environment in general, so as to provide a comfortable seating for patients and companions. With a robust and resistant in steel tube 30x1,5mm in the base and 22x1,25mm in the backrest. Backrest with lumbar reinforcement allows to accompany the lumbar curvature, promoting a greater support and consequent sensation of comfort. Reclining backrest up to 155º through 500N gas actuator. Lifting feet support through 200N gas actuator. It supports arms adjustable in height to the height of the seat facilitating the patient in and out of the chair, as well as the lateral transfers. 125mm wheels with brake system on two wheels. Vinyl screen upholstery with a wide range of colors available. Several options available: concave armrests, serum support, centralized brake system, etc.
Product category: Patient lifting systems
1 Transfer Hoist ECLIPSE 220
ECLIPSE transfer hoists provide a comfortable transfer from a bed, chair or even the floor. The base legs, equipped with 100mm double resistant wheels (2 with brake), are opened by a lever to simplify front access in total stability and safety. Small wheels allow easy hoist entry under a bed. Easy to manoeuvre in small spaces and narrow aisles. Mounts in less than 1 minute. The arm movement is guaranteed by an electric actuator, equipped with a safety system in case of power failure, emergency button and mechanical anti-panic lowering. Powered by 2 batteries 12V 2,9Ah each, with autonomy up to 40 cycles. Maximum user weight: 135Kg (Eclipse 135); 150Kg (Eclipse 150), 180kg (Eclipse 180/180 Plus) and 220Kg (Eclipse 220). Models Eclipse 180Plus and Eclipse 220 with 10.000N electrical system and detachable battery. Other options and configurations: electric foot opening, 4 point sling hook, scale, 150Kg model with actuation by hydraulic system, additional battery for models Eclipse 180Plus and Eclipse 220.
Suitable for transfers to and from bed, chair, bath or even floor, it can be used by patients with amputation, paraplegia, tetraplegia, among other conditions, by applying the most suitable transfer slings. Note: slings purchased separately.
Suitable for transfers to and from bed, chair, bath or even floor, it can be used by patients with amputation, paraplegia, tetraplegia, among other conditions, by applying the most suitable transfer slings. Note: slings purchased separately.
Product category: Rehabilitation equipment and devices
1 Stander SIMPSON
SIMPSON, with sturdy metallic structure and wooden work tray. Knee supports height, width and depth adjustable. Footrests width and depth adjustable. Height adjustable structure for users between 145cm and 185cm high. Adjustable rear locking system. This equipment assists users with limited motor functions to assume the biped position, with all the benefits that this position promotes in the cardiorespiratory, circulatory, osteoarticular, digestive and vestibular systems.
1 Paediatric Tilt in Space Wheelchair DORY
DORY is a paediatric tilt-in-space growth wheelchair. Adaptable to growing needs, it is compatible with various configurations and accessories. Tilt function up to 45º actuated in the handles, assists in pressure relief as well as maintaining posture. The wheelchair has a brace bar that guarantees the similar actuation of both tilt actuators. Rigid seat and back easily detachable (without tools). Includes ComfortBack 3D back cushion, ComfortSeat 3D seat cushion and “U” headrest. Height, depth and width adjustable armrests. Height adjustable, foldable and detachable legrests. 300mm pneumatic quick release rear wheels and 200mm solid front wheels. Removable and height adjustable anti-tippers. Aluminium frame available in 2 versions: Foldable Dory (with cross bar to allow the chair to be closed; this feature associated with the lightweight frame, the foldable back and the detachable seating is a good option when you need to store the wheelchair in the car or in small places) and Fixed Dory (it maintains all growth characteristics, however the chassis is not foldable). Other configurations available – see order form.
Product category: Patient beds and nursing beds
1 Nursing Electric Bed TRIUMPH PLUS MISTERY
TRIUMPH PLUS, electric bed recommended for environments with medium/high bacteriological risk, such as clinics, geriatric residences and palliative care. With steel structure 60x30x1,5mm with epoxy paint. Collapsible bed in two parts for easy storage and transport. 4-section Mistery mattress support with 3 articulated sections and 1 fixed, with fiber polymer slats for easy disinfection. Robust and attractive Triumph Plus headboards and footboards with integrated motors for height adjustment. Electric articulation of the back and legs, through low voltage motors. Motors hidden in the headboard and footboard. Solid beech side guards. Bottom space completely free for easy access from hoists or other devices. Structure prepared for application of serum support and lifting pole. Optional: Trendelemburg and reverse. Maximum user weight: 175Kg. SWL: 210Kg.
Product category: Patient beds and nursing beds
1 Nursing Electric Bed VICTORY VIOLET
VICTORY, electric bed recommended for environments with medium or high bacteriological risk, like clinics, geriatric residencies and palliative care. With steel structure 60x30x1,5mm with epoxy paint. 4-section mattress support with 3 articulated sections and 1 fixed, with fiber slats for easy disinfection. Independent electric articulation of the back and legs, through 6000N electric motors of low voltage. Simple, intuitive operation control with helical cable. Violet headboards and footboards in rounded varnished MDF, beech colour. Structure prepared for application of serum support and lifting pole. Height adjustable legs without wheels. Modular design, this model allows the bed to easily convert from manual to electric or from fixed height to adjustable height through scissor or “double H” elevator. Maximum user weight: 195Kg. SWL: 230Kg. Possibility of manufacturer by measure.
Product category: Patient beds and nursing beds
1 Nursing Manual Bed VICTORY VIOLET
VICTORY, manual bed recommended for environments with medium or high bacteriological risk, like clinics, geriatric residencies and palliative care. With steel structure 60x30x1,5mm with epoxy paint. 4-section mattress support with 3 articulated sections and 1 fixed, with fiber slats for easy disinfection. Independent manual articulation of the back and legs, through 2 retractable crancks in steel of high resistance. Violet headboards and footboards in rounded varnished MDF, beech colour. Option: fixed mattress support without articulation. Structure prepared for application of serum support and lifting pole. Height adjustable legs without wheels. Modular design, this model allows the bed to easily convert from manual to electric or from fixed height to adjustable height through scissor or “double H” elevator. Maximum user weight: 195Kg. SWL: 230Kg. Possibility of manufacturer by measure.
1 Lightweight Wheelchair ATIVA SIOUX
ATIVA SIOUX, active and light wheelchair made of aluminium (weight without wheels: 7,2Kg). Rigid chassis, resistant and functional. Height and depth adjustments. Solid back and seat. Back and seat memory foam cushions for maximum comfort. Foldable backrest, angle adjustable. Height, depth and angle adjustment of the seat. Unique footrest height adjustable. Side panels. Pneumatic 600mm rear wheels with quick release and spoke rims allows easy storage and transport. 100mm solid front wheels. Seat width: 370, 400, 430, 460, 500mm. Maximum user weight: 125Kg.
Product category: Patient beds and nursing beds
1 Nursing Bed HI-LO FANTASY
FANTASY HI-LO SCISSOR, electric bed recommended for environments with reduced bacteriological risk. It presents itself as a simple and modern line. With 50x20x2mm steel frame with epoxy paint finish, resistant to ultraviolet rays and with a salt resistance of 1000h (proof carried out in accordance with ASTM B117 with no visible signs of corrosion). 4-Section mattress support, 3 articulated sections and 1 fixed, with wooden slats. Electric actuation of head and foot sections with 2 low tension electric motors, voltage 6000N. Simple, intuitive actuation control with helical cable. Bed lift by electric scissor lift. Iris headboards and feetboards in melamine with beech, cherry or wenge finish. Structure prepared for application of serum and pendulum support. 100mm wheels, 2 with brake. Prepared for application of universal grids. Max user weight: 175Kg. SWL: 210Kg.
1 Lightweight wheelchair ATIVA INVICTUS
ACTIVA INVICTUS, resistant and functional Ø25mm tubes and triple cross bar wheelchair made of aluminium. Sideguard (option: folding armrest). Height and tension adjustable upholstery, with memory foam and 3D cover. Height adjustable independent footrests. Height and depth adjustments of the rear wheels. Pneumatic rear wheels with quick release allows easy storage and transport. Seat width: 400, 430, 460mm. Maximum user weight: 125Kg.
1 Manual Wheelchair MAIA
MAIA, wheelchair with innovative design, designed specifically for institutional use. Easy storage, without having to close the chair, for convenience and speed. With rigid steel frame, without detachable components and reinforced structure for users up to 180Kg. Folding armrests, with wide support surface for comfort. Seat with ergonomic inclination of 10º. Removable with a zipper, easily washable upholstery very resistant in net type. Polyester seat available in different colors. Ergonomic handles. Footrests metallic, with unique non-slip base. Rear wheels of 600mm (option: wheels 300mm). Solid 150mm front wheels, rotating 360º. Optional components: flag with institution ID, coin dispenser system, oxygen bottle holder, serum holder, seat belt and interchangeable upholstery. Recommended for use not only in hospitals and clinics, but also for use in shopping centers, airports and car parks.
Product category: Patient beds and nursing beds
1 Nursing Electric Bed ALZHEIMER
Line recommended for environments with medium/high bacteriological hazards, such as clinics, nursing homes, continued
care units. Conceived for people affected with Alzheimer or other autonomy lost related pathologies, risking
falling off the bed.
Alzheimer Bed has epoxy painted steel frame 60x30x1,5mm. With 4-Section mattress support, three articulated sections
and a fixed one. Its polymer fiber slats enable easy disinfection and reduction of bacteriological hazards. Electric actuation
of head and foot sections with 2 low tension 6000N motors operated by an easy and intuitive remote control with
safety functions (self contour, retarded action, entrapment protection on head section). Robust and stable elevator,
with 125mm wheels, 2 with brakes, ensures robustness and lateral stability is safer for the user as it lowers to 26cm, avoiding
injuries in case of fall. Maximum height 75cm to ensure a better positioning and ergonomics for the carers, also
enabling easy movement at any intermediate height. With 2 accessories supports in the structure. .Jasmine head- and
foot boards in MDF (medium density fiberboard) rounded and varnished, beech finishing. Beech solid wood side rails.
Options available (ex. Central brakes).
care units. Conceived for people affected with Alzheimer or other autonomy lost related pathologies, risking
falling off the bed.
Alzheimer Bed has epoxy painted steel frame 60x30x1,5mm. With 4-Section mattress support, three articulated sections
and a fixed one. Its polymer fiber slats enable easy disinfection and reduction of bacteriological hazards. Electric actuation
of head and foot sections with 2 low tension 6000N motors operated by an easy and intuitive remote control with
safety functions (self contour, retarded action, entrapment protection on head section). Robust and stable elevator,
with 125mm wheels, 2 with brakes, ensures robustness and lateral stability is safer for the user as it lowers to 26cm, avoiding
injuries in case of fall. Maximum height 75cm to ensure a better positioning and ergonomics for the carers, also
enabling easy movement at any intermediate height. With 2 accessories supports in the structure. .Jasmine head- and
foot boards in MDF (medium density fiberboard) rounded and varnished, beech finishing. Beech solid wood side rails.
Options available (ex. Central brakes).
1 Manual Wheelchair CELTA
Attractive design, functionality and robustness define the CELTA steel wheelchair. Indicated for users with general mobility impairment, it is a sturdy and durable chair, practical to use on a day to day basis. In addition, it allows various configurations and the inclusion of accessories to better adjust to the condition of the user, over time. Reinforced structure with tubes of 25mm in diameter and triple cross for greater resistance. Easily detachable armrests. Height adjustable and detachable footrests. Rear wheels 600mm (optional 300mm wheels on CELTA TRANSIT model), pneumatic or solid. Nylon or spoked rims. Solid 200x30mm front wheels (option with cost: pneumatic wheels 200x50mm). Easy to carry, it is fodlable and has quick release of the rear wheel (exception: size 500 has no quick release). Seat upholstery: 370, 400, 430, 460, 500mm. Maximum user weight: 150Kg.
Product category: Rehabilitation equipment and devices
1 AXILLARY WALKER
Designed and used especially in the rehabilitation process, the AXILLARY WALKER allows to assume the vertical position and gait in children with reduced mobility. Dynamic, with height adjustable axillary, hand and pelvic support. The axillary and pelvic supports are padded for user comfort and have a safety back closure. Robust base with 4 wheels of 100mm, all with brake. Foot separator (option). Appealing and modern design. Size L (also available paediatric sizes S and M).
1 Manual Wheelchair CELTA BED
CELTA CAMA, the manual wheelchair that allows the user to assume the horizontal position in a comfortable way, combining the reclining back with the elevation of the footrests. Reclining of backs through spring lockers, actuated at the level of the wrists, from 90º to 170º. Reinforced structure with 25mm diameter and triple cross tubes to provide greater strength. With trunk and head support. Height-adjustable side wedge headrest for comfort and user stability. Easily detachable armrests. Detachable, fold-out lift footrests with cushioned back leg support. Rimmed wheels with 600mm pneumatic or solid rear wheels and massive 200x30mm front wheels. Attachable for easy transport. Maximum user weight: 125Kg.
Product category: Rehabilitation equipment and devices
1 PARAPLEGIC STANDER
Paraplegic stander with sturdy metallic structure and wooden work tray. Knee support adjustable in height and distance. Adjustable locking system and upper trunk pad. This equipment helps adults with limited motor functions to assume the vertical position, with all the benefits that this position promotes in the cardiorespiratory, circulatory, osteoarticular, digestive and vestibular systems.
Product category: Rehabilitation equipment and devices
1 QUADRIPLEGIC STANDER
Quadriplegic stander with sturdy metallic structure and wooden work tray. Knee support adjustable in height and distance. Adjustable locking system and upper trunk pad. This equipment helps adults with limited motor functions to assume the vertical position, with all the benefits that this position promotes in the cardiorespiratory, circulatory, osteoarticular, digestive and vestibular systems.
Product category: Rehabilitation equipment and devices
1 VENTRAL AND DORSAL STANDER
Ventral and dorsal inclined stander, with structure in square tube. Allows various inclination positions, from vertical (90º) to horizontal position. With 2 padded boddies. It has 2 adjustable straps for trunk and leg support. With 4 castors, 2 with brake. Tray (optional) adjustable in height and inclination. This stander assists the rehabilitation process by allowing to assume the vertical position, with all the benefits that this position provides at the circulatory, digestive and respiratory level. Available in adult size (also available paediatric models).
Product category: Other equipment for hospital and care
1 Aluminium Bath/Shower Chair PACIFIC
The bath and sanitary chair PACIFIC is a "2 in 1" model: made of materials that allow the use in the bath (structure in anodized aluminum, with high resistance and durability, its composition avoids oxidation in the presence of humidity), has bucket and seat with opening for sanitary use. With fixed armrests. Allows direct use of the chair over the toilet, or use through the bucket. The bucket stands out for its width and depth, preventing the existence of leaks. Easy cleaning and disinfection. With two seat types available: seat in "skin integral polyurethane", extremely comfortable, anatomically shaped, rear wedge and lid; or ABS seat with front or rear opening. There are two models available: (1) model with four 100mm castors, with two brakes; or (2) model without castors, with legs height adjustable. A product that will facilitate the day-to-day of the user and caregivers, as it helps to avoid going to the bathroom at night and helps in the trips to the bath, reducing the number of transfers made.
Product category: Other equipment for hospital and care
1 Relax Couch SAVANNAH PLUS
SAVANNAH PLUS, extra comfort reclining couch. Extremely comfortable and cozy. With a modern and attractive design, it perfectly matches any space. It has a legrest that lifts simultaneously with the progressive inclination of the back. Very comfortable seat with silicone fiber cushion to help prevent pressure ulcers. Easily detachable armrests for easier transfers. The armrests have a detachable padded upholstery, when used they allow to decrease the useful seat width for thinner people. Rainbow upholstery for the structure antibacterial and antifungal protection, resistant to salt and chlorinated water, UV light (7 grade) and abrasion resistance > 100k cycles. Easy to clean, with additional protective layer for better stain response. Fire protection EN 1021-1:2006/ EN 1021-2:2006. Suede upholstery in the central zone with soft finish, easy to clean (removable and washable at 40º), breathable, with fire protection EN 1021-1:2006 and abrasion resistance > 40k cycles. Upholstery according to REACH regulation. Colours: brown, beige and grey. Available in manual or electric version, without castors or with castors with scratch protection.
Product category: Other equipment for hospital and care
1 Relax Couch EXÓTICO
EXÓTICO, is a comfort sofa recommended for home use, homes and hospitals, for patients and caregivers. With traditional and rounded lines, it is very practical and allows a change of position in patients with motor difficulties. It has a legrest that lifts simultaneously with the progressive inclination of the back. It has fixed arms, lateral head support, leg support and comfort seat width a top layer in viscoelastic foam 55Kg/m3 (memory foam). The legrest is foldable/ extendable allowing greater support. Stable in all positions. Medical upholstery with antibacterial protection, fire protection EN 1021-1:2006/ EN 1021-2:2006 and abrasion resistance > 100k cycles. Upholstery according to REACH regulation. Colours available: brown, black and blue. Available in manual or electric version, without castors or with castors with scratch protection. Also available EXOTICO PLUS with detachable armrests.
Product category: Rehabilitation equipment and devices
1 SMART WALKER - FOR SEVERE GAIT DISFUNCTIONS
Smart Walker is an innovative research project developed in Portugal, Europe, aiming at the creation of multifunctional walker which allows, on one hand, to improve stability and pathological gait, and on the other hand, allows for therapists to use the walker as a tool to monitor the patient´s condition, to make it an effective and smart rehabilitation tool!
Product category: Other equipment for hospital and care
1 Couch BOLINÊS
BOLINÊS, specially designed for homes and day centers, provide a comfortable seating for patients and companions. Made of solid wood to guarantee total stability and robustness; with rounded corners for safety reasons. Armrests in wood. Versatile and complete line with 1, 2 or 3 seats, and can have separate or united places. With normal or high back. Individual models with high reclining backs and lift-up legrest option. Rainbow synthetic leather upholstery with antibacterial and antifungal protection, resistant to salty and chlorinated water, UV light (grade 7) and exceptional abrasion> 100k cycles. Easy to clean, with additional protective cover for better response to stains. Fireproof protection EN 1021-1: 2006 / EN 1021-2: 2006. According to REACH regulations. Wide range of colors to choose from.
Product category: Other equipment for hospital and care
1 MEDICATION TROLLEY
MEDICATION TROLLEY, with capacity for 15, 30, 45, 60 and 90 trays. Robust interior steel frame. Exterior panels, base and cover in phenolic compact. With the exception of the medication cart with 15 trays, in the remaining trolley sizes the trays are accessed by two fronts. Structure with 4 double 100mm castors, with brake. Door(s) with lock for added security and protection. It allows the application of weekly drug trays with 7 removable modules, each with 4 adjustable and removable interior spaces. Trays purchased separately
Product category: Patient beds and nursing beds
1 Hospital Bed VICTORY HO HPL
VICTORY HO, hospital electric bed designed and recommended for environments with medium or high bacteriological risk. Robust 60x30x1.5mm steel frame with epoxy paint. Victory frame with four sections, three articulated and one fixed, with polymer fibre slats, which allow for easy disinfection and reduce bacteriological risks. Independent electrical articulation of the backrest and legs, through 6000N low-voltage motors suitable for hospital environments. Bed elevation by electric double H elevator (photo) or scissor elevator, guarantees robustness and lateral stability. Simple and intuitive user control. Detachable headboards and footboards in HPL (phenolic compact, grey), for easy access and disinfection. Includes 3 plastic blockers to avoid movement of mattress. With wall protectors on 4 corners. Structure prepared for the application of 2 poles (ex. IV pole and monkey pole). 125mm ABS wheels (with double H elevator) or 100mm steel wheels (scissor elevator), 2 with brakes. Prepared for application of steel universal folding side rails with epoxy paint. Maximum user weight: 195Kg. SWL: 230Kg. CE Certification. Manufactured in accordance with EU hospital beds standards.
Option: Victory HO manual, with 2 cranks for manual operation of head and legs sections.
Option: Victory HO manual, with 2 cranks for manual operation of head and legs sections.
Product category: Patient beds and nursing beds
1 Hospital Bed VICTORY HO ABS
VICTORY HO, hospital electric bed designed and recommended for environments with medium or high bacteriological risk. Robust 60x30x1.5mm steel frame with epoxy paint. Victory frame with four sections, three articulated and one fixed, with polymer fibre slats, which allow easy disinfection and reduce bacteriological risks. Includes 3 plastic blockers to avoid movement of mattress. Independent electrical articulation of the backrest and legs, through low-voltage motors suitable for hospital environments. Bed elevation by electric double H elevator (photo) or scissor elevator. Simple and intuitive user control. Detachable ABS headboards and footboards for easy access and disinfection. With wall protectors on 4 corners. Structure prepared for the application of 2 poles (ex. IV pole and monkey pole). 125mm wheels (with double H elevator) or 100mm steel wheels (scissor elevator), 2 with brakes. Optional (on photo): steel universal folding side rails with epoxy paint, central brake. Maximum user weight: 195Kg. SWL: 230Kg. CE Certification. Manufactured in accordance with EU hospital beds standards.
Option: Victory HO manual, with 2 cranks for manual operation of head and legs sections
Option: Victory HO manual, with 2 cranks for manual operation of head and legs sections
Product category: Patient beds and nursing beds
1 Hospital ICU Bed EUPHORIA
Hospital bed specifically designed for use in environments with high bacteriological risk, such as intensive care units, with materials resistant to disinfection. Steel frame with epoxy paint. Articulated bed of 4 planes (fixed pelvic section and 3 articulated sections), in ABS, with holes for ventilation of the mattress. Self-regression of the back section to avoid abdominal compression during the joint of the bed. Headboards and footboards in ABS, easily detachable. Protection stops in the 4 corners of the bed. 125mm wheels with brake. Electric articulation of the back and legs by independent motors, through electric control with helical cable. Mechanical rack for the actuation of the feet section. Columns bed lift system and functions of Trendelenburg and reverse. Mechanical and electrical CPR. Supervisory control with functions of Fowler, semi-Fowler, cardiac chair, auto caregiver and bed output and function lock. Emergency battery. Power failure alarm. Structure prepared for different configurations. It allows to attach different accessories. Compatibility with other equipment (eg hoists). Robust and resistant materials to the disinfection recommended in hospital environment. Available configurations: EUPHORIA BASIC, EUPHORIA PLUS and EUPHORIA PLUS COMMAND SIDE RAILS. Maximum user weight: 250 kg. Safety load: 335Kg. Possibility of manufacturing by measure.
Product category: Other equipment for hospital and care
1 MEDICAL SCREEN
TRIPLE MEDICAL SCREEN W / WHEELS - Structure in steel tube, epoxy paint, 1240x900 panels in hospital screen, equipped with wheels.
DOUBLE MEDICAL SCREEN W / WHEELS - Structure in steel tube, epoxy paint, 1240x900 panels in hospital screen, equipped with wheels.
DOUBLE MEDICAL SCREEN W / WHEELS - Structure in steel tube, epoxy paint, 1240x900 panels in hospital screen, equipped with wheels.
Product category: Other equipment for hospital and care
1 Examination Couch VICTORY ELECTRIC/HYDRAULIC
EXAMINATION COUCH VICTORY, with bipartite structure in steel with epoxy paint finish. Practical and robust, it is a great option for use in physiotherapy clinics and gyms, for observation and treatment of users. Adjustable in height, from 400 to 800mm, it facilitates the user's climb to the examination couch, as well as the ergonomics of the caregiver. The height adjustment can be done in two ways: hydraulic, through pedal, or electric, through intuitive use command. Quilted PU foam bed and memory foam coated with high strength vinyl fabric (available in various colors). Articulated headboard through pneumatic system. Contains paper roll holder. It has two fixed feet and two castors with brakes; this system facilitates the movement of the examination couch in occasional small offices.
Product category: Other equipment for hospital and care
1 HYDRAULIC STRETCHER
HYDRAULIC TRANSPORT STRETCHER, designed for use in institutional and hospital environments, for observation and treatment. Promotes caregiver ergonomics and facilitates user access. Built in steel with epoxy paint finish resistant to ultraviolet rays and with a degree of resistance to salt spray of 1000h (test carried out in accordance with ASTM B117 without any visible sign of corrosion). Bipartite bed in a phenolic compact, operated by gas pumps. Height adjustment by scissor system, with hydraulic actuators, pedal operated, on both sides of the stretcher, approx. from 40cm to 80cm. Version with Trendelemburg and hydraulic anti-Trendelemburg operated by handle is also available. Driving bars at both ends of the stretcher for easy handling. Protection stops in the 4 corners. Folding side rails. Protection stops in the 4 corners. Serum support. Oxygen bottle holder. Mattress with bielastic cover impermeable to liquids and permeable to gauze, with straps for better attachment to the bed. Cover with flameproof protection, according to BS 7175 1989, Crib 5. Resistant to the recommended disinfections in a hospital environment.
Product category: Rehabilitation equipment and devices
1 COLUMNS STRETCHER
Designed for use in hospital and institutional environment, for observation and treatment. It promotes the ergonomics of the caregiver and facilitates the access of the user. Constructed of steel with epoxy paint resistant to ultraviolet rays and with a degree of resistance to saline fog of 1000h (test performed in accordance with ASTM B117 without any visible signs of corrosion). Bipartite (or tripartite) bed in phenolic compact, radiotransparent, operated by gas pumps. Height adjustment by hydraulic columns, pedal operated, on both sides of the stretcher, from 50cm to 90cm. Trendelemburg and reverse hydraulically actuated by double pedal, on both sides of the stretcher. Driving bars on both ends for easy handling. Stainless steel folding side rails. Protection ends in the 4 corners. Serum holder with stainless steel hooks. Oxygen bottle holder and belongings/clothing support in stainless steel. Central brake with 200mm directional wheels and 1 anti-static wheel. Anti-static mattress with 80mm thickness, with bielastic cover impermeable to liquids and permeable to gazes, with straps for better attachment to the bed. Fireproof cover, according to BS 7175 1989, Crib 5. Resistant to the recommended disinfection in hospital environment.
Product category: Other equipment for hospital and care
1 DRESSING TROLLEY
DRESSING TROLLEY, stainless steel plasters desk with 1 drawer + 1 bowl. With a shelf, drawer and top in frosted stainless steel plate. Protection grid on top. Bowl in stainless steel, collapsible and removable. Equipped with 75mm castors. Indicated for use in nursing homes, clinics or hospitals.
Product category: Other equipment for hospital and care
1 BATH IN BED SOLUTION - SHOWERCARE
Showercare®️ is an all in one innovator system with 4 components - impermeable, antibacterial and antiviral lining; a dispositive that allows the bath in bed and its platform of automated cleaning; and an AI platform which detects patterns of contagion. It allows the high dependent patients to take a bath with running water, without the need to leave their bed.
Relying on our industrial partner, ORTHOS XXI, we expect to reach the market in the year 2021, generating relevant economic-financial gains with direct impact on the hospitalar macro management.
Diana Pires, CEO
ihcare - innovation hospital care, lda, Rua Pedro Nunes, Ed. C
3030-199 Coimbra | PORTUGAL
Mobile: +351914553201
SkypeID:dianapires5
Www.ihcare.pt
ORTHOS XXI
+351 936 199 005
Relying on our industrial partner, ORTHOS XXI, we expect to reach the market in the year 2021, generating relevant economic-financial gains with direct impact on the hospitalar macro management.
Diana Pires, CEO
ihcare - innovation hospital care, lda, Rua Pedro Nunes, Ed. C
3030-199 Coimbra | PORTUGAL
Mobile: +351914553201
SkypeID:dianapires5
Www.ihcare.pt
ORTHOS XXI
+351 936 199 005
Product category: Patient beds and nursing beds
Nursing Hi-lo Bed VICTORY CHAMELIA
Electric bed recommended for environments with medium/high bacteriological risk, such as clinics, nursing homes, continuing care units. Made of 60x30x1,5mm steel structure with epoxy paint finish. With 4-Section mattress, 3 articulated and 1 fixed section, with fiberglass rulers, for easy disinfection. Electric articulation independent of the back and legs, through low voltage electric motors. Simple, intuitive actuation control with helical cable. Bed lift by double H electric elevator ensures robustness and lateral stability. Chamelia headboards and bedsheets in beech-colored varnished plated MDF with rails for the application of up and down wooden side rails. Includes solid wood side rails. Structure prepared for application of IV support and pendant. 125mm wheels, 2 with brake. Maximum user weight: 195Kg. SWL: 230Kg. Possibility of manufacture by measure.
About us
Company portrait
ORTHOS XXI is a manufacturer of Medical Devices located in Portugal, Europe. In 2020 we celebrate 35 years of experience.
We have a consolidated portfolio of products organised in 11 brands:
ORTHOS MOBILITY ORTHOS MOBILITY TECH
ORTHOS PAEDIATRICS ORTHOS BATH&CLEAN
ORTHOS GERIATRICS ORTHOS TRANSFER
ORTHOS HOSPITAL ORTHOS PREVENTION
ORTHOS WALKING AIDS ORTHOS SIT&STAND
ORTHOS BARIATRICS
We are convinced that, with our work, we contribute daily to improve the quality of life and to meet the needs of the users of our products and services.
We consider a constant investment in innovation and product development is crucial, hence we have a dedicated R&D team for this purpose. This endeavour allows us to present new products and developments as well as to respond to the customized needs of users.
The quality of our products can be confirmed in the best hospitals, clinics and nursing homes that show their preference towards our products.
Most ORTHOS XXI products are Class I medical devices and bear the CE marking according to Regulation (EU) 2017/745 and they are notified to Infarmed, the Portuguese Health Authority, linked to the European Health Authority. Many of these are, at the time of their launch, tested by accredited and independent entities, namely the IBV (Instituto de Biomecanica de Valencia, in Spain). The company is also certified according to EN ISO 9001.
We have a consolidated portfolio of products organised in 11 brands:
ORTHOS MOBILITY ORTHOS MOBILITY TECH
ORTHOS PAEDIATRICS ORTHOS BATH&CLEAN
ORTHOS GERIATRICS ORTHOS TRANSFER
ORTHOS HOSPITAL ORTHOS PREVENTION
ORTHOS WALKING AIDS ORTHOS SIT&STAND
ORTHOS BARIATRICS
We are convinced that, with our work, we contribute daily to improve the quality of life and to meet the needs of the users of our products and services.
We consider a constant investment in innovation and product development is crucial, hence we have a dedicated R&D team for this purpose. This endeavour allows us to present new products and developments as well as to respond to the customized needs of users.
The quality of our products can be confirmed in the best hospitals, clinics and nursing homes that show their preference towards our products.
Most ORTHOS XXI products are Class I medical devices and bear the CE marking according to Regulation (EU) 2017/745 and they are notified to Infarmed, the Portuguese Health Authority, linked to the European Health Authority. Many of these are, at the time of their launch, tested by accredited and independent entities, namely the IBV (Instituto de Biomecanica de Valencia, in Spain). The company is also certified according to EN ISO 9001.
Company data
Export content
max. 50%
Number of employees
100-499
Foundation
1985
Area of business
- Imaging and diagnostics / medical equipment & devices
- Physiotherapy / Orthopaedic Technology
