Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
Hitec Medical Co., Ltd.
Room 703, No. 1328 Hengnan Road, Minhang District,
201114
Shanghai
China
China
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
This company is co-exhibitor of
China Chamber of Commerce for Import & Export of Medicines & Health Products
Contact
Jackie Sheng
director
Our range of products
Product categories
- 05 Commodities and consumer goods
- 05.07 Disposables
- 05.07.01 Disposable articles for hospitals
Disposable articles for hospitals
- Laryngeal Mask Airways
- oxygen mask with tubing
- aerosol mask
- Nebulizer mask with tubing
- Non-rebreath mask
- Multi-vent mask
- Adjustable Venturi mask with 6diluters
- Venturi T-piece
- Tracheostomy mask
- Nebulizer kit
- Nasal Oxygen Cannula
- Oxygen tubing
- PVC air cushion face mask
- reusable Silicone air cushion face mask
- Breathing circuit
- Catheter mount
- Guedel airway
- nasopharngeal airway
- Heat and moisture filter
- Anti-bacterial filter
- PVC manual resuscitator
- silicone manual resuscitator
- endotracheal tube cuffed
- endotracheal tube uncuff
- oral preformed endotracheal tube
- nasal preformed endotracheal tube
- Reinforced endotracheal tube
- endotracheal tube with suction lumen
- Silicone reinforced endotracheal tube-reusable
- Tracheostomy tube cuffed
- Tracheostomy tube uncuff
- Tracheostomy tube with suction lumen
- intubatiuon stylet
- endotracheal tube introducer(bougie)
- Endotracheal tube kit
- Endobronical tube
- Endobronchial Blocker tube
- PVC Larngeal mask airway
- Single use silicone laryngeal mask airway
- Reusable silicone laryngeal mask airway
- Reusable & reinforced silicone laryngeal mask airway
- Soda Lime
- Spinal Needle
- Epidural needle
- Spinal Kit
- Epidural kit
- Combined spinal&epidural needle
- Yankauer suction handle
- Suction connecting tube
- Suction connecting tube with yankauer handle
- Latex suction catheter
- Suction catheter
- Nasogastric tube(feeding tube)
- PVC Stomach tube
- silicone stomach tube
- Rectal tube
- closed suction catheter
- Holer for tracheostomy tube
- Strap for leg bag
- infusion set
- Blood transfusion set
- Burrette set
- Scalp vein set
- extension tube
- IV cannula
- PVC closed wound drainage system
- Closed wound drainage system(Spring)
- Silicone reservoir
- Drainage bag
- Silicone thoracic drainaga tube
- Silicone round perforrated drainage tube
- Silicone T Biliary Drains
- Silicone flat fluted drains
- Enema bag set
- Hemodialysis bloodline
- A.V.fistula needle
- Hemodialyzer
- Auto disable syringes
- 05 Commodities and consumer goods
- 05.10 Catheters / urinary catheters and accessories
Catheters / urinary catheters and accessories
- Latex Foley Catheter
- Economic Urine Bag
- Holder for foley catheter
- Silicone foley catheters
- Silicone foley catheter with temprature sensor
- Hematuria catheter
- Latex malecot catheter
- Latex urethral catheter
- Spigot for foley catheters
- latex male eexternal catheter
- silicone male external catheter
- Ureteral stent kit
- double J stent
- Economic Urine bag
- Simple luxury urine bag
- urine leg bag
- Luxury urine bag
- Urine meter
- PVC nelaton catheter
- pediatric urine bag
- Suprapublic silicone foley catheter
- silicone foley catheter with groove on surface
- Tiemann silicone foley catheter
- Tiemann latex foley cahteter
- 05 Commodities and consumer goods
- 05.14 Personal protective equipment
- 05.14.02 OT face masks, OT cap-disposables
OT face masks, OT cap-disposables
Our products
Product category: Catheters / urinary catheters and accessories
Latex Foley Catheter
Surface:
- Smooth surface and tip allows atraumatic insertion for enhanced patient conform
- 100% silicone coated, good for patients with latex allergy
- Hydrophilic coating is available
- Thickened catheter tail, effectively avoids cavity collapse
- Less trauma to urethral mucosa
- Larger diameters maximize urine flow, and reducing clotting
- Latex balloon is designed to retain its shape with good concentricity
- Latex balloon with perfect rebound elasticity after deflation, less trauma and maximize patient comfort during removing catheter out of bladder through urethral
- No balloon burst or leakage after being dipped inside artificial urine for 7 days
- Capacity ranges from 3ml-50ml
- Available with Rubber valve (Soft valve) and Plastic valve (Hard valve)
- 2 way Fr 06-30
- 3 way Fr 16-30. The third channel is used to infuse sterile saline or another irrigation solution, and used after surgery on the bladder or prostate, to wash away blood and blood clots.
Product category: Catheters / urinary catheters and accessories
Economic Urine Bag
Inlet tube:
- Smooth surface and kink-resistant
- At length of 90cm, other lengths available as per request
- With conical connector with steps, provide an easy and firm connection to the drainage catheter
- No sample port
- No clamps
- No hanger
- Available with outlet Push-Pull valve, Screw valve and T valve
- Push-Pull valve/ Screw valve: for easy emptying and minimal spillage
- T valve: for easy one-handed bag drainage
- With non-return valve to avoid the back flow of urine, increase patient safety
- With graduated scales printed on
- Color with White or Transparent
- Bag capacity with 1000/1500/2000 ml
Product category: Disposable articles for hospitals
Laryngeal Mask Airways
Cuff:
- Classic shape for optimum anatomical conformance
- Firm smooth-surface back plate to aid ease of insertion
- Reinforced tip on the cuff for fast and accurate positioning
- Cuff color of PVC type is transparent; while Silicone type can be transparent, pink or blue color
- Touch sensitive for cuff pressure monitoring
- Available with color coded balloon for easier size identification
- Available with color coded cuff inflator
- With standard and reinforced tube
- Reinforced tube with kink-free steel wire, eliminates the risk of airway tube occlusion, improves surgical access without any loss of seal. Reinforced laryngeal mask is specially designed for ENT, ophthalmic, dental and other head/neck surgeries. The high flexibility of the tube enables positioning airway from the surgical field without any loss of seal
- Tube is printed with size, length and other information for quick visual reference
- With X-ray line on the tube
- Reusable type can be utilized and sterilized for 40 times
- Single use PVC and Reinforced
- Single use Silicone and Reinforced
- Reusable silicone and Reinforced
Product category: OT face masks, OT cap-disposables
medical 3ly face mask
MEDICAL FACE MASK Class I
-Three-layer folding design
-Elastic earloops
-Flexible noseband and soft metal make the disposable face mask fit your face better
Material:
1st layer: pp 25g
2nd layer: 25-30g
3rd layer: PP 25g
Size 17.5x9.5CM
Colour blue
Polypropylene inner and outer facing assures comfortable on the inside and protection on the outside.;
Conform with EN14683 Type 1
Certificate CE, GB
Box of 50pcs
-Three-layer folding design
-Elastic earloops
-Flexible noseband and soft metal make the disposable face mask fit your face better
Material:
1st layer: pp 25g
2nd layer: 25-30g
3rd layer: PP 25g
Size 17.5x9.5CM
Colour blue
Polypropylene inner and outer facing assures comfortable on the inside and protection on the outside.;
Conform with EN14683 Type 1
Certificate CE, GB
Box of 50pcs
Product category: Disposable articles for hospitals
oxygen mask with tubing
Raw material:
- Odorless & soft medical graded PVC brings utmost safety & comfort to patients
- Both ‘with DEHP’ type and ‘DEHP free’ type are available for options
- Be with white transparent and green transparent polyvinyl chloride particle.
- Normally 2m or 2.1m tube is configured
- Star lumen designing to minimize risk of airflow termination although its kinked
- Be with luer slip (conventional) connector and luer lock (universal new type) connector
- Ergonomic designing facilitates full covering and reduces oxygen gas leakage
- Adjustable nose clip makes comfortable fitting
- Good edge curling
- Stronger hole prevent break of face mask edge when being pulled by elastic strap
- Elasticity enables longer or shorter to fix to different patients head
- Can be latex or latex free type
- With tie to prevent being pulled off from mask
- Pediatric standard（S)
- Pediatric elongated (M)
- Adult standard(L)
- Adult elongated(XL)
Product category: Disposable articles for hospitals
aerosol mask
Raw material:
- Odorless & soft medical graded PVC brings utmost safety & comfort to patients
- Both ‘with DEHP’ type and ‘DEHP free’ type are available for options
- Be with white transparent and green transparent polyvinyl chloride particle.
- Ergonomic designing facilitates full covering and reduces oxygen gas leakage
- Adjustable nose clip makes comfortable fitting
- Good edge curling
- Stronger hole prevent break of face mask edge when being pulled by elastic strap
- Elasticity enables longer or shorter to fix to different patients head
- Can be latex or latex free type
- With tie to prevent being pulled off from mask
- Pediatric standard（S)
- Pediatric elongated (M)
- Adult standard(L)
- Adult elongated(XL)
Product category: Disposable articles for hospitals
Nebulizer mask with tubing
Raw material:
- Be made from odorless & soft medical grade PVC(Mask and Oxygen tubing) and PC(Nebulizer chamber) which brings utmost safety & comfort to patients
- Be with white transparent and green transparent polyvinyl chloride bothly
- Nebulizer chamber: Be made from polycarbonate (abbreviated as ‘PC’) with better physical and biological compatibility than polystyrene (abbreviated as ‘PS’). Wall thickness>21mm
- Both ‘with DEHP’ and ‘DEHP free’ type are available for options, while ‘DEHP free’ type is trended to more and more widely used.
- Normally 2m or 2.1m tube is configured
- Star lumen designing to minimize risk of airflow termination when it’s kinked
- Be with luer slip (conventional) connector and luer lock (universal new type) connector, while luer lock connector is designed for more tightly connection with central oxygen supplying system in hospitals
- Ergonomic designing facilitates full covering and enable sufficient inhalation of nebulized drugs
- Adjustable nose clip makes comfortable fitting and prevents nondirective moving
- Good edge curling
- Thickened hole prevent break of face mask edge when being elastic strap is being pulled
- Be made from polycarbonate (abbreviated as ‘PC’) with better physical and biological compatibility than polystyrene (abbreviated as ‘PS’).
- Chamber wall thickness > 21mm, much stronger than those whose thickness less than 18mm
- Available with nebulizer 6ML,8ML, 20ML
- Elasticity enables longer or shorter to fix to different patients head
- Can be latex or latex free type
- With tie to prevent being pulled off from mask
- Pediatric standard(S)
- Pediatric elongated(M)
- Adult standard(L)
- Adult elongated(XL)
Product category: Disposable articles for hospitals
Non-rebreath mask
Raw materials:
- Be made from odorless medical grade PVC, to be light and more comfortable, consists of mask, oxygen tube, reservoir bag and connector
- Be with white transparent and green transparent colors while transparent plastic mask makes it be visible, allowing care providers to be better monitor patient’s conditions instantly
- Both ‘with DEHP’ and ‘DEHP free’ types are available for options, while ‘DEHP free’ type is trended to more and more widely used
- Normally 2m or 2.1m tube is configured
- Star lumen designing to minimize risk of airflow termination when it’s kinkedBe with luer slip (conventional) connector and luer lock (universal new type) connector, while luer lock connector is designed for more tightly connection with central oxygen supplying system in hospitals
- Ergonomic designing facilitates full covering and enable sufficient inhalation of nebulized drugs
- Adjustable nose clip makes comfortable fitting and prevents nondirective moving
- Good edge curling
- Double silicon sheets is for non-rebreathing aim, to enable exhalant gas be out but prevent air to be inhalated
- Thickened hole prevent break of face mask edge when being elastic strap is being pulled
- Be intended to supply oxygen or other gases to an individual for oxygen therapy, and the reservoir bag is able to prevent rebreathing
- Provide high oxygen concentration, being up to 90% and even higher, for better therapy effect
- Usually 1L and 1.5ML are available
- Elasticity enables longer or shorter to fix to different patients head
- Can be latex or latex free type
- With tie to prevent being pulled off from mask
- Pediatric standard(S)
- Pediatric elongated(M)
- Adult standard(L)
- Adult elongated(XL)
Product category: Disposable articles for hospitals
Multi-vent mask
Raw materials:
Oxygen tube:
FLO2 Ratio O2 Liter Flow (to patient)
24% 25.3:1 3 LPM 79 LPM
26% 14.8:1 3 LPM 47 LPM
28% 10.3:1 6 LPM 68 LPM
30% 7.8:1 6 LPM 53 LPM
35% 4.6:1 9 LPM 50 LPM
40% 3.2:1 12 LPM 50 LPM
50% 1.7:1 15 LPM 41LPM
Size:
- Be made from odorless medical grade PVC, to be light and more comfortable
- Be with white transparent and green transparent colors while transparent plastic mask makes it be visible, allowing care providers to be better monitor patient’s conditions instantly
- Both ‘with DEHP’ and ‘DEHP free’ types are available for options, while ‘DEHP free’ type is trended to more and more widely used
Oxygen tube:
- Normally 2m or 2.1m tube is configured
- Star lumen designing to minimize risk of airflow termination when it’s kinked
- Be with luer slip (conventional) connector and luer lock (universal new type) connector, while luer lock connector is designed for more tightly connection with central oxygen supplying system in hospitals
- Ergonomic designing facilitates full covering and enable sufficient inhalation of nebulized drugs
- Adjustable nose clip makes comfortable fitting and prevents nondirective moving
- Good edge curling
- Thickened hole prevent break of face mask edge when being elastic strap is being pulled
- Be intended to supply oxygen and other gases to an individual for oxygen therapy and allow adjustment of oxygen concentration
- Different oxygen diluters , (green: 24%, 26%, 28% and 30%, white: 35%, 40%, 50%) is for selected for appropriate rate
- Recommended rate as below:
FLO2 Ratio O2 Liter Flow (to patient)
24% 25.3:1 3 LPM 79 LPM
26% 14.8:1 3 LPM 47 LPM
28% 10.3:1 6 LPM 68 LPM
30% 7.8:1 6 LPM 53 LPM
35% 4.6:1 9 LPM 50 LPM
40% 3.2:1 12 LPM 50 LPM
50% 1.7:1 15 LPM 41LPM
Size:
- Pediatric standard(S)
- Pediatric elongated(M)
- Adult standard(L)
- Adult elongated(XL)
Product category: Disposable articles for hospitals
Adjustable Venturi mask with 6diluters
Single diluter for one concentration, seven diluters can be selected for :
- Pediatric standard(S)
- Pediatric elongated(M)
- Adult standard(L)
- Adult elongated(XL)
- 24%(blue) 4L/min,
- 28%(yellow) 4L/min,
- 31%(white) 6L/min,
- 35%(green) 10L/min,
- 40%(pink) 8L/min,
- 50%(orange) 10L/min
- 60%(red)
- Pediatric standard(S)
- Pediatric elongated(M)
- Adult standard(L)
- Adult elongated(XL)
Product category: Disposable articles for hospitals
Nebulizer kit
Raw materials:
- Be made from medical grade ABS, PP, HDPE and PVC, which bring utmost safety & comfort to individuals
- Oxygen tube be with white transparent and green transparent color
- Both ‘with DEHP’ and ‘DEHP free’ type are available for options
- Normally 2m or 2.1m tube is configured
- Star lumen designing to minimize risk of airflow termination when it’s kinked
- Be with luer slip (conventional) connector and luer lock (universal new type) connector, while luer lock connector is designed for more tightly connection with central oxygen supplying system in hospitals
- Be made from polycarbonate (abbreviated as ‘PC’) with better physical and biological compatibility than polystyrene (abbreviated as ‘PS’).
- Chamber wall thickness > 21mm, much stronger than those whose thickness less than 18mm
- Available with nebulizer 6ML,8ML, 20ML
- To be connected with one side of T-piece
- Corrugated tube designing too prevent nebulized air or oxygen which is with liquid medicine be leaked
- Length: 150mm
Product category: Disposable articles for hospitals
Nasal Oxygen Cannula
Raw materials:
- Be made from odorless medical grade PVC, being consists of oxygen tube and nose tip
- Be with white transparent and green transparent colors bothly, while transparent plastic material enables it to be visible, allowing care providers to better monitor patient’s conditions instantly
- ‘DEHP free’ type is available for option which is trended to more and more widely used
- Normally 2m or 2.1m tube is configured
- Inner diameter: 5mm and 6mm is for options usually
- Star lumen designing to minimize risk of airflow termination when it’s kinked
- Be with luer slip (conventional) connector and luer lock (universal new type) connector, while luer lock connector is designed for more tightly connection with central oxygen supplying system in hospitals
- Available with: straight nose tip, curved nose tip(softer material gives more comfortable to patients), flared nose tip.
- Smallest size, Neonate size is available for preference besides other common sizes, Infant, Pediatric and Adult.
Product category: Disposable articles for hospitals
PVC air cushion face mask
Air Cushion:
- Non-toxic PVC, available with scented and unscented
- Soft cushion creates a gentle, low pressure seal with patient’s face, maximize patient comfort
- Profiled air cushion facilitates optimum air-seal with patient’s face, decreasing the incidence of facial pressure necrosis and associated problems
- Malleable cone conforms to patient features
- Crystal clear cone allows the continuous clinician visual observation of the patient
- 22 mm colored retaining rings, easy for size identification. The ring is removable for hand-held procedures
- 22 mm fresh gas inlet located centrally over the patient’s mouth , facilitating fibre optic intubation and airway suctioning
- The inflation port providing a customized fit and increased comfort
- Available with “Sleeping” inflation valve
- Available with “Standing” inflation valve
- 0# Neonate
- 1# infant
- 2# Child standard
- 3# small adult
- 4#Medium sdult
- 5#Large adult
Product category: Disposable articles for hospitals
reusable Silicone air cushion face mask
Silicone Anesthesia Mask(One-piece)
All-in-one piece soft silicone cushion for better seal and comfort.
Ergonomic Shape for lower dead space and better air circulation.
Made of 100% clear, medical grade Silicon, latex free.
Reusable, all parts are fully autoclavable up to 134℃.
avaliable szies:
All-in-one piece soft silicone cushion for better seal and comfort.
Ergonomic Shape for lower dead space and better air circulation.
Made of 100% clear, medical grade Silicon, latex free.
Reusable, all parts are fully autoclavable up to 134℃.
avaliable szies:
- 0# Neonate
- 1# infant
- 2# Child standard
- 3# small adult
- 4#Medium sdult
- 5#Large adult
Product category: Disposable articles for hospitals
Breathing circuit
Features:
- Medical-grade EVA/PE material
- Available with gas bag and water traps
- Available with latex/latex free bag
- Available with extra limb
- Available with Corrugated tube flexible tube and smoothbore tube
- Non-toxic PVC, available with scented and unscented
- vailable with Corrugated / Expandable / Smoothbore
- Qualified material and connectors avoid leakage
- both for child and adult
- Type: Latex / Latex Free
- Capacity available with 1 / 1.5 / 2 / 3 / 4 L
Product category: Disposable articles for hospitals
Guedel airway
Airway tube:
Size
Length (mm) No. Color code
40 000 pink
50 00 dark blue
60 0 black
70 1 white
80 2 green
90 3 yellow
100 4 red
110 5 light blue
120 6 orange
- Center channel, Guedel type
- Semi-rigid, nontoxic, flexible design
- Smoothly finished and rounded edges, less oral trauma, maximize patient comfort
- Smooth airway path for easy cleaning
- Size identified on the flange end
- Latex Free
- Reinforced bite block helps prevent biting of tongue and airway occlusion
- Color coded for easy size identification
Size
Length (mm) No. Color code
40 000 pink
50 00 dark blue
60 0 black
70 1 white
80 2 green
90 3 yellow
100 4 red
110 5 light blue
120 6 orange
Product category: Disposable articles for hospitals
nasopharngeal airway
Airway tube:
- Maximum kink-resistance helps to ensure a patent airway
- Soft PVC, nontoxic, flexible design
- Smoothly finished and rounded edges, less nasal trauma, maximize patient comfort
- Smooth surface facilitates insertion
- Size identified on the tube
- Tube with flared end preventing the device from becoming lost inside the patient’s nose
- Latex Free
- Maximum kink-resistance helps to ensure a patent airway
- Soft PVC, nontoxic, flexible design
- Smoothly finished and rounded edges, less nasal trauma, maximize patient comfort
- Smooth surface facilitates insertion
- Size identified on the tube
- Tube with flared end preventing the device from becoming lost inside the patient’s nose
- Latex Free
Product category: Disposable articles for hospitals
Heat and moisture filter
Features:
- Made of PP-medical grade
- Utilized in combination with breathing circuits and tracheal tubes
- Providing optimal moisture and heat output with low resistance to flow and bi- directional filtration with bacterial/viral efficency
- Offering cross-contamination protection for patients and equipment when the clinical gas pass through
- infant
- child
- adult
Product category: Disposable articles for hospitals
Anti-bacterial filter
Features:
- Made of PP-medical grade
- Utilized in combination with breathing circuits and tracheal tubes
- Providing optimal moisture and heat output with low resistance to flow and bi- directional filtration with bacterial/viral efficency
- Offering cross-contamination protection for patients and equipment when the clinical gas pass through
- infant
- child
- adult
Product category: Disposable articles for hospitals
PVC manual resuscitator
- - Standard with air bag, silicone mask, oxygen tube;
- - Accessories such as mouthpieces, oropharyngeal airways, and lifting straps can be freely selected;
- - 100% medical grade PVC, latex-free;
- - Integral intake valve design, direct connection of air storage bag and oxygen tube;
- - Use by a single patient;
- - The non-slip effect of the rough surface of the recovery balloon can give the rescuer good operability.
- -size: infant, child, adult
Product category: Disposable articles for hospitals
silicone manual resuscitator
- Standard with air bag, silicone mask, oxygen tube;
- - Accessories such as mouthpieces, oropharyngeal airways, and lifting straps can be freely selected;
- - 100% medical grade silicone, latex-free; liquid material is softer, more resilient, higher transparency; can be reused by high temperature sterilization; - set 60cmH2O safety pressure limiting valve;
- - Integral intake valve design, direct connection of air storage bag and oxygen tube;
- - In addition to oxygen tubes, air bags and optional mouthpieces, oropharyngeal airway accessories, spheres, masks, and PC attachments can be sterilized at a high temperature of 134°C and can be reused.-
- - Use by a single patient;
- - The non-slip effect of the rough surface of the recovery balloon can give the rescuer good operability.
- -size: infant, child, adult
Product category: Disposable articles for hospitals
endotracheal tube cuffed
Tube:
2.5mm~10.0mm
- Thermosensitive and kink-resistant PVC ensure flexibility of tube, perfectly fit to airways
- Double ring marks accurate intubation positioning
- Tube is printed with size, length and other information for quick visual reference
- Smooth tubing wall prevents secretions gathering
- With X-ray line
- Bevel tip, atraumatic and rounded with smoothly formed Murphy eyes
- High volume low pressure cuff, minimizes the risk of trauma
- Thin and delicate walls reduce effectively loss of seal
2.5mm~10.0mm
Product category: Disposable articles for hospitals
endotracheal tube uncuff
Tube:
2.0mm~10.0mm
- Thermosensitive and kink-resistant PVC ensure flexibility of tube, perfectly fit to airways
- Double ring marks accurate intubation positioning
- Tube is printed with size, length and other information for quick visual reference
- Smooth tubing wall prevents secretions gathering
- With X-ray line
- Bevel tip, atraumatic and rounded with smoothly formed Murphy eyes
2.0mm~10.0mm
Product category: Disposable articles for hospitals
oral preformed endotracheal tube
Tube:
- Thermosensitive and kink-resistant PVC ensure flexibility of tube, perfectly fit to airways
- Double ring marks accurate intubation positioning
- Tube is printed with size, length and other information for quick visual reference
- Smooth tubing wall prevents secretions gathering
- With X-ray line
- Bevel tip, atraumatic and rounded with smoothly formed Murphy eyes
- oral preformed type
Product category: Disposable articles for hospitals
nasal preformed endotracheal tube
Tube
- Thermosensitive and kink-resistant PVC ensure flexibility of tube, perfectly fit to airways
- Double ring marks accurate intubation positioning
- Tube is printed with size, length and other information for quick visual reference
- Smooth tubing wall prevents secretions gathering
- With X-ray line
- Bevel tip, atraumatic and rounded with smoothly formed Murphy eyes
- nasal preformed type
Product category: Disposable articles for hospitals
Reinforced endotracheal tube
Tube:
Cuff
size:
3.0~10.0mm
- - With spiral stainless steel reinforcement inside tubing, extremely flexible for and soft for optimal anatomical adaption
- - Thermosensitive and kink-resistant PVC ensure flexibility of tube, perfectly fit to airways
- - Double ring marks accurate intubation positioning
- - Tube is printed with size, length and other information for quick visual reference
- - Smooth tubing wall prevents secretions gathering
- - With X-ray line
- - Bevel tip, atraumatic and rounded with smoothly formed Murphy eyes
Cuff
- - High volume low pressure cuff, minimizes the risk of trauma
- - Thin and delicate walls reduce effectively loss of seal
size:
3.0~10.0mm
Product category: Disposable articles for hospitals
endotracheal tube with suction lumen
Features:
from 6.0mm to 9.0mm
- Medical-grade PVC(DEHP or DEHP free available)
- With lumen suctioning secretions accumulated under cuff
- With X-ray line on tubing
- With 15mm standard connector
- Atraumatic soft rounded beveled tip and Murphy eyes are less invasive
- High volume low pressure cuff provides anffective low pressure seal
- with suction lumen
from 6.0mm to 9.0mm
Product category: Disposable articles for hospitals
Silicone reinforced endotracheal tube-reusable
- - Both of the tube and cuff are made of medical grade silicone, better biocompatibility
- - High volume, low pressure silicone cuff maintains good sealing.
- - Silicone tube with spiral reinforced wire reducing risk of kinking.
- - 100% medical grade silicone and soft tip, reduce the damage to the tracheal wall and airway mucosa.
- - Single-use and reusable 2 types available, both two types with style equipped.
- - Reusable type is autoclave sterilization only, can be reused up to 10 times.
- - avaliable size: from 3.5mm~9.5mm
Product category: Disposable articles for hospitals
Tracheostomy tube cuffed
Tube:
from 4.0mm~10.0mm
- Made of thermosensitive material, with sufficient initial rigidity for insertion, confirms to individual patients’ upper respiratory tract at the body temperature
- Tube is printed with size, length and other information for quick visual reference
- Tip atraumatic and rounded
- Tube holds the tracheostomy open, bypass the upper airway obstruction, provide long-term ventilation support and manage tracheal/bronchial secretion, delivery oxygen to the lungs
- Obturator: used to insert the tube, to provide a smooth surface that guides the tube when it is being inserted
- Flange end, clearly and anatomically-shaped, provides better access for stoma care, extends from the side of the outer tube, and has holes to attach cloth ties or Velcro straps around the neck
- All tube supplied with two neck tapes
- High volume low pressure cuff, minimizes the risk of trauma
- Thin and delicate walls reduce effectively loss of seal
- This item is packed in individual hard blister package, sterilized.
from 4.0mm~10.0mm
Product category: Disposable articles for hospitals
Tracheostomy tube uncuff
Tube:
from 3.0mm~10.0mm
- Made of thermosensitive material, with sufficient initial rigidity for insertion, confirms to individual patients’ upper respiratory tract at the body temperature
- Tube is printed with size, length and other information for quick visual reference
- Tip atraumatic and rounded
- Tube holds the tracheostomy open, bypass the upper airway obstruction, provide long-term ventilation support and manage tracheal/bronchial secretion, delivery oxygen to the lungs
- Obturator: used to insert the tube, to provide a smooth surface that guides the tube when it is being inserted
- Flange end, clearly and anatomically-shaped, provides better access for stoma care, extends from the side of the outer tube, and has holes to attach cloth ties or Velcro straps around the neck
- All tube supplied with two neck tapes
from 3.0mm~10.0mm
Product category: Disposable articles for hospitals
Tracheostomy tube with suction lumen
Features:
4.0mm~9.0mm
- Medical-grade PVC (DEHP or DEHP free available)
- With X-ray line on tubing
- Atraumatic soft rounded tip is less invasive
- With lumen suctioning secretions accumulated above cuff
4.0mm~9.0mm
Product category: Disposable articles for hospitals
intubatiuon stylet
Features:
Size (Fr/CH) Applicable tracheal tube Length (mm)
6 < 3.5 mm 310
10 4.0-5.0 mm 390
14 >5.5 mm 390
- Easily adapted to any desired shape for tracheal tube intubation
- Low friction between stylet and the tracheal tube for easy insertion and withdrawal
- Smooth distal tip end
- Soft, slippery sheath extends past distal metal end to form atraumatic tip to reduce trauma during intubation
Size (Fr/CH) Applicable tracheal tube Length (mm)
6 < 3.5 mm 310
10 4.0-5.0 mm 390
14 >5.5 mm 390
Product category: Disposable articles for hospitals
endotracheal tube introducer(bougie)
Tip:
Size (Fr) Type Length (mm)
6 Solid 535
10 Solid 700
15 Solid 700
10 Hollow 700
15 Hollow 700
- The endotracehal tube introducer with atraumatic Coudé tip(35-40°) to reduce the potential for patient trauma
- designed to assist in tracheal tube exchange during difficult intubation. It is most commonly known as Bougie
- Low friction between bougie and the tracheal tube for easy insertion and withdrawal
- Product markings on surface act as excellent indicators of intubation
- Size ranges provided facilitate use with tracheal tubes from size 2.0 mm to 10.0mm
Size (Fr) Type Length (mm)
6 Solid 535
10 Solid 700
15 Solid 700
10 Hollow 700
15 Hollow 700
Product category: Disposable articles for hospitals
Endotracheal tube kit
Features:
laryngoscope,Endotracheal Tube, Intubating Stylet, Connecting Tube, Suction Catheter, Bite Block, Medical rubber coated Fabric, Oropharyngeal Airway, Disposable Syringe, Gauze Pads, Cup, Latex Gloves and Non-fabric Drape
- The kit includes all components assisting intubation of a tracheal tube
- Tracheal tubes are available in a wide range of sizes and types
- Oropharyngeal airways, intubating stylet and suction catheters are available in a wide range of sizes and types
laryngoscope,Endotracheal Tube, Intubating Stylet, Connecting Tube, Suction Catheter, Bite Block, Medical rubber coated Fabric, Oropharyngeal Airway, Disposable Syringe, Gauze Pads, Cup, Latex Gloves and Non-fabric Drape
Product category: Disposable articles for hospitals
PVC Larngeal mask airway
Cuff:
#1.0/1.5/2.0/2.5/3.0/4.0/5.0
- Classic shape for optimum anatomical conformance
- Firm smooth-surface back plate to aid ease of insertion
- Reinforced tip on the cuff for fast and accurate positioning
- Cuff is transparent
- Touch sensitive for cuff pressure monitoring
- Available with color coded cuff inflator
- The high flexibility of the tube enables positioning airway from the surgical field without any loss of seal
- Tube is printed with size, length and other information for quick visual reference
#1.0/1.5/2.0/2.5/3.0/4.0/5.0
Product category: Disposable articles for hospitals
Single use silicone laryngeal mask airway
Cuff:
#1.0/1.5/2.0/2.5/3.0/4.0/5.0
- Classic shape for optimum anatomical conformance
- Firm smooth-surface back plate to aid ease of insertion
- Reinforced tip on the cuff for fast and accurate positioning
- Cuff color can be transparent, pink or blue color
- Touch sensitive for cuff pressure monitoring
- Available with color coded balloon for easier size identification
- Available with color coded cuff inflator
- The high flexibility of the tube enables positioning airway from the surgical field without any loss of seal
- Tube is printed with size, length and other information for quick visual reference
#1.0/1.5/2.0/2.5/3.0/4.0/5.0
Product category: Disposable articles for hospitals
Reusable silicone laryngeal mask airway
Cuff:
Pilot balloon:
Tube:
Size:
#1.0/1.5/2.0/2.5/3.0/4.0/5.0
- Classic shape for optimum anatomical conformance
- Firm smooth-surface back plate to aid ease of insertion
- Reinforced tip on the cuff for fast and accurate positioning
- Cuff color can be transparent, pink or blue color
Pilot balloon:
- Touch sensitive for cuff pressure monitoring
- Available with color coded balloon for easier size identification
- Available with color coded cuff inflator
Tube:
- The high flexibility of the tube enables positioning airway from the surgical field without any loss of seal
- Tube is printed with size, length and other information for quick visual reference
- With X-ray line on the tube
- Reusable type can be utilized and sterilized for 40 times
Size:
#1.0/1.5/2.0/2.5/3.0/4.0/5.0
Product category: Disposable articles for hospitals
Reusable & reinforced silicone laryngeal mask airway
Cuff:
Pilot balloon:
Tube:
Size:
#1.0/1.5/2.0/2.5/3.0/4.0/5.0
- Classic shape for optimum anatomical conformance
- Firm smooth-surface back plate to aid ease of insertion
- Reinforced tip on the cuff for fast and accurate positioning
- Cuff color can be transparent, pink or blue color
Pilot balloon:
- Touch sensitive for cuff pressure monitoring
- Available with color coded balloon for easier size identification
- Available with color coded cuff inflator
Tube:
- Reinforced tube with kink-free steel wire, eliminates the risk of airway tube occlusion, improves surgical access without any loss of seal. Reinforced laryngeal mask is specially designed for ENT, ophthalmic, dental and other head/neck surgeries. The high flexibility of the tube enables positioning airway from the surgical field without any loss of seal
- Tube is printed with size, length and other information for quick visual reference
- Reusable type can be utilized and sterilized for 40 times
Size:
#1.0/1.5/2.0/2.5/3.0/4.0/5.0
Product category: Disposable articles for hospitals
Spinal Needle
Features:
- Medical grade stainless steel needle and stylets
- full sizes of anesthesia needle
- Identified as spinal needle bevel quincke tip, pencil point tip and epidural needle
- Needle bevel enables smooth, sharpness, maximize, patient comfort.
- size from 18G to 27G
Product category: Disposable articles for hospitals
Epidural needle
Features:
- Medical grade stainless steel needle and stylets
- full sizes of anesthesia needle
- Identified as spinal needle bevel quincke tip, pencil point tip and epidural needle
- Needle bevel enables smooth, sharpness, maximize, patient comfort.
- size from 18G to 27G
Product category: Disposable articles for hospitals
Combined spinal&epidural needle
Epidural needle: 16/18G *80mm
Spinal Needle: 25G*110mm, Pencil point
Epidural catheter: multiport with mark 0.8 /1.0mm≥850mm
Epidural Filter: 0.22μm,hydrophobic membrance, luer lock
LOR syringe: 7ml, 10ml available
Catheter adaptor: TBA, secure the catheter completely
Spinal Needle: 25G*110mm, Pencil point
Epidural catheter: multiport with mark 0.8 /1.0mm≥850mm
Epidural Filter: 0.22μm,hydrophobic membrance, luer lock
LOR syringe: 7ml, 10ml available
Catheter adaptor: TBA, secure the catheter completely
Product category: Disposable articles for hospitals
Suction connecting tube with yankauer handle
Tube:
- High quality tube can maintain its shape during suctioning
- The wall thickness prevents the tube from collapsing when the tube is used under high negative pressure
- Tube length at 2m, 3m or other lengths as per request
- Tube can be DEHP or DEHP FREE
- Each end of the tube has universal female connectors for convenient and secure attachment to yankauer handle and suction apparatus
- Suction connecting tube with yankauer handle are intended for the use of suctioning body fluid in combination with suction apparatus during operation on thoracic cavity or abdominal cavity, so as to offer an clear surgical field
- Available with 3 types of tips. They are: Plain, Bulb and Crown tip
- Available with or without vacuum control at the distal end of the handle for finger tip / Thumb control facility during suction management
- Handle is open with 4 lateral eyes to withstand negative pressure and ensure continuous and easy suction available with or without filter
Product category: Disposable articles for hospitals
Suction catheter
Catheter:
Fr6~Fr20
- Smooth surface and tip allows atraumatic insertion for enhanced patient conform
- Low friction between suction catheter and the tracheal tube/bronchial tube for easy insertion and withdrawal, ease the job of removing respiratory secretions from the airway, so as to keep the airway clear of secretions and prevent plugging
- With distal end open tip, atraumatic
- Available with X-ray line
- Catheter can be DEHP or DEHP FREE
- Smoothly formed and less trauma
- Larger diameters maximize flow rate
- Color coded connecters for fast size identification
- There are five types of connectors supplied by Hitec Medical. They are: Plain type, T type, Cap-cone type, Y type and Transparent Y type
Fr6~Fr20
Product category: Disposable articles for hospitals
Nasogastric tube(feeding tube)
Tube:
from Fr4 to Fr20
- Smooth surface and tip allows atraumatic insertion for enhanced patient conform
- With distal end open tip, atraumatic, enhance the function of providing nutrition to patients who cannot obtain nutrition by mouth, are unable to swallow safely, or need nutritional supplementation
- Available with X-ray line
- Catheter can be DEHP or DEHP FREE
- Feeding tube is inserted through nasal passageway for short term use
- Smoothly formed and less trauma
- Larger diameters maximize flow rate
- Color coded connecters for fast size identification
from Fr4 to Fr20
Product category: Disposable articles for hospitals
PVC Stomach tube
Tube:
- Smooth surface and tip allows atraumatic insertion for enhanced patient conform
- With distal end open tip(closed tip available as well), atraumatic, enhance the function of providing nutrition to patients who cannot obtain nutrition by mouth, are unable to swallow safely, or need nutritional supplementation, or on mechanical ventilators
- Available with X-ray line
- Catheter can be DEHP or DEHP FREE
- Stomach tube is inserted through nasal passageway or mouth and pushed down into the stomach, allows nurse to make sure that stomach does not get over filled with food or stomach juice, and to make sure the stomach juice does not become too acid, and also to feed the patient.
- Ticker(than Feeding tube) tube can be used to suck out stomach fluid for testing
Lateral Eyes:
- Smoothly formed and less trauma
- Larger diameters maximize flow rate
Connector and types:
- Color coded connecters for fast size identification
Sizes:
Fr6 to Fr22
- Smooth surface and tip allows atraumatic insertion for enhanced patient conform
- With distal end open tip(closed tip available as well), atraumatic, enhance the function of providing nutrition to patients who cannot obtain nutrition by mouth, are unable to swallow safely, or need nutritional supplementation, or on mechanical ventilators
- Available with X-ray line
- Catheter can be DEHP or DEHP FREE
- Stomach tube is inserted through nasal passageway or mouth and pushed down into the stomach, allows nurse to make sure that stomach does not get over filled with food or stomach juice, and to make sure the stomach juice does not become too acid, and also to feed the patient.
- Ticker(than Feeding tube) tube can be used to suck out stomach fluid for testing
Lateral Eyes:
- Smoothly formed and less trauma
- Larger diameters maximize flow rate
Connector and types:
- Color coded connecters for fast size identification
Sizes:
Fr6 to Fr22
Product category: Disposable articles for hospitals
Rectal tube
Tube:
- Smooth surface and tip allows atraumatic insertion for enhanced patient conform(Tube beed to be lubricated before insertion)
- With distal end tip, atraumatic,
- Available with X-ray line
- Catheter can be DEHP or DEHP FREE
- Rectal tube is used to help remove gas from the lower intestines, or to remove fecal matter, to relieve discomfort in patients who suffer from severe intestinal gas and distention, when gas medications, exercise, and other remedies have been exhausted without adequate results
Lateral Eyes:
- Smoothly formed and less trauma
- Larger diameters maximize flow rate
Connector and types:
- Color coded connecters for fast size identification
Size:
Fr18~Fr36
- Smooth surface and tip allows atraumatic insertion for enhanced patient conform(Tube beed to be lubricated before insertion)
- With distal end tip, atraumatic,
- Available with X-ray line
- Catheter can be DEHP or DEHP FREE
- Rectal tube is used to help remove gas from the lower intestines, or to remove fecal matter, to relieve discomfort in patients who suffer from severe intestinal gas and distention, when gas medications, exercise, and other remedies have been exhausted without adequate results
Lateral Eyes:
- Smoothly formed and less trauma
- Larger diameters maximize flow rate
Connector and types:
- Color coded connecters for fast size identification
Size:
Fr18~Fr36
Product category: Disposable articles for hospitals
closed suction catheter
Features
- Medical-grade PVC (DEHP or DEHP free available)
- With 2 irrigation ports
- With transparent sleeves
- Catheter tip is smoothly designed to cause less trauma to mucous membranes
- With safety control switch
- Color coding for identification
size:
Fr6 to Fr20
- 24h type, 48h type, 72h type are available
- Medical-grade PVC (DEHP or DEHP free available)
- With 2 irrigation ports
- With transparent sleeves
- Catheter tip is smoothly designed to cause less trauma to mucous membranes
- With safety control switch
- Color coding for identification
size:
Fr6 to Fr20
- 24h type, 48h type, 72h type are available
Product category: Disposable articles for hospitals
Holer for tracheostomy tube
HOLDER FOR TRACHEOSTOMY TUBE
1. Secure and easy to use Velcro tabs fit any size of tracheostomy tube’s flange ends
2. Length adjustable to fit most patients, from pediatric to adult
3. Latex-Free
Click to Favorites
Product details
Holder for Tracheostomy Tube
Holder components:
- Two piece neck bands at different lengths
- Velcro tabes. Two on shorter band, one on the longer
Neck bands:
- Latex-Free
- With moisture repellent lining reduces the risk of skin breakdown. Help to keep neck dry, prevent skin excoriation on neck
- Leaves no residue on patient’s skin
- Skin-friendly, clear and breathable
- No hard plastic parts on the holder, minimize the risk of skin breakdown
- Soft cotton material decrease patient irritation and skin trauma, maximize patient’s comfort
- Stretch material allows for normal daily activities, increase patient’s confidence in life
- Length adjustable to fit most patients, from pediatric to adult
Velcro tape:
- Adhesive enough to offer secure positions of tracheostomy tube on patients
- Secure and easy to use Velcro tabs fit any size of tracheostomy tube’s flange ends
- Secure the Velcro tabs limit movement of tracheostomy tube reducing accident decannulation, and hold the tube in place, reduce the tracheal irritation by the tube and prevent damage to tracheal mucosa
- Helps to keep stoma area clean and dry, and enhances recovery by assuring intact airway
1. Secure and easy to use Velcro tabs fit any size of tracheostomy tube’s flange ends
2. Length adjustable to fit most patients, from pediatric to adult
3. Latex-Free
Click to Favorites
Product details
Holder for Tracheostomy Tube
Holder components:
- Two piece neck bands at different lengths
- Velcro tabes. Two on shorter band, one on the longer
Neck bands:
- Latex-Free
- With moisture repellent lining reduces the risk of skin breakdown. Help to keep neck dry, prevent skin excoriation on neck
- Leaves no residue on patient’s skin
- Skin-friendly, clear and breathable
- No hard plastic parts on the holder, minimize the risk of skin breakdown
- Soft cotton material decrease patient irritation and skin trauma, maximize patient’s comfort
- Stretch material allows for normal daily activities, increase patient’s confidence in life
- Length adjustable to fit most patients, from pediatric to adult
Velcro tape:
- Adhesive enough to offer secure positions of tracheostomy tube on patients
- Secure and easy to use Velcro tabs fit any size of tracheostomy tube’s flange ends
- Secure the Velcro tabs limit movement of tracheostomy tube reducing accident decannulation, and hold the tube in place, reduce the tracheal irritation by the tube and prevent damage to tracheal mucosa
- Helps to keep stoma area clean and dry, and enhances recovery by assuring intact airway
Product category: Catheters / urinary catheters and accessories
Holder for foley catheter
Holder components:
- Adhesive and stretch body
- Velcro tape
- Writable base surface
- Adhesive tab with two wings
Adhesive and stretch body:
- Latex-Free
- Water-resistant
- Leaves no residue on patient’s skin
- Skin-friendly, clear and breathable
- No constriction on blood flow of superficial or deep veins
- No hard plastic parts on the holder, minimize the risk of skin breakdown
- Soft cotton material decrease patient irritation and skin trauma, maximize patient’s comfort
- Stretch material allows for normal daily activities, increase patient’s confidence in life
Velcro tape:
- Adhesive enough to offer secure positions of foley catheter on patients
- Easy to be unfastened for a required secure position
Writable base surface:
- To recode patient data
Two wings tab:
- One size fits all types of foley catheters, no fear of choosing the incorrect product or size
- Can be secured on the shaft or the Y-port of foley catheter. Catheter will not slide out of position, reduce the risk of urethral erosion and traumatic removal
- The adhesive tab can be easily repositioned several times for different usage
- Can be applied to abdomen
- Adhesive and stretch body
- Velcro tape
- Writable base surface
- Adhesive tab with two wings
Adhesive and stretch body:
- Latex-Free
- Water-resistant
- Leaves no residue on patient’s skin
- Skin-friendly, clear and breathable
- No constriction on blood flow of superficial or deep veins
- No hard plastic parts on the holder, minimize the risk of skin breakdown
- Soft cotton material decrease patient irritation and skin trauma, maximize patient’s comfort
- Stretch material allows for normal daily activities, increase patient’s confidence in life
Velcro tape:
- Adhesive enough to offer secure positions of foley catheter on patients
- Easy to be unfastened for a required secure position
Writable base surface:
- To recode patient data
Two wings tab:
- One size fits all types of foley catheters, no fear of choosing the incorrect product or size
- Can be secured on the shaft or the Y-port of foley catheter. Catheter will not slide out of position, reduce the risk of urethral erosion and traumatic removal
- The adhesive tab can be easily repositioned several times for different usage
- Can be applied to abdomen
Product category: Disposable articles for hospitals
infusion set
Tube:
- Made of medical grade PVC or DEHP free
- Length is available from 150cm to 250cm
- High flexible and kink resistant
Spike:
- Made of medical grade ABS for easily puncture
- With wings or without wings
- Air vented with closure or non vented
Drip chamber:
- Injection molding or extrusion molding
- With or without fluid filter
- 20drops/min or 60drops/min
Flow regulator:
- Medical grade PE or ABS
- With or without clamp
- Different colors for choice
Injection site:
- Latex or latex free
- Y-site, straight tube or ball shape tube for option
- Needle free is available;
Connector:
- Avaliable with Luer slip or luer lock connector
Needle:
- With or without needle
- Available with hypodermic needle or scalp vein set
- Needle size from 18G to 27G
- Made of medical grade PVC or DEHP free
- Length is available from 150cm to 250cm
- High flexible and kink resistant
Spike:
- Made of medical grade ABS for easily puncture
- With wings or without wings
- Air vented with closure or non vented
Drip chamber:
- Injection molding or extrusion molding
- With or without fluid filter
- 20drops/min or 60drops/min
Flow regulator:
- Medical grade PE or ABS
- With or without clamp
- Different colors for choice
Injection site:
- Latex or latex free
- Y-site, straight tube or ball shape tube for option
- Needle free is available;
Connector:
- Avaliable with Luer slip or luer lock connector
Needle:
- With or without needle
- Available with hypodermic needle or scalp vein set
- Needle size from 18G to 27G
Product category: Disposable articles for hospitals
Blood transfusion set
Tube:
- Made of medical grade PVC or DEHP free
- Length is available from 150cm to 250cm
- High flexible and kink resistant
Spike:
- Made of medical grade ABS for easily puncture
- With wings or without wings
- Air vented with closure or non vented
Drip chamber:
- Injection molding or extrusion molding
- With or without fluid filter
- 20drops/min or 60drops/min
Flow regulator:
- Medical grade PE or ABS
- With or without clamp
- Different colors for choice
Injection site:
- Latex or latex free
- Y-site, straight tube or ball shape tube for option
- Needle free is available;
Connector:
- Avaliable with Luer slip or luer lock connector
- Made of medical grade PVC or DEHP free
- Length is available from 150cm to 250cm
- High flexible and kink resistant
Spike:
- Made of medical grade ABS for easily puncture
- With wings or without wings
- Air vented with closure or non vented
Drip chamber:
- Injection molding or extrusion molding
- With or without fluid filter
- 20drops/min or 60drops/min
Flow regulator:
- Medical grade PE or ABS
- With or without clamp
- Different colors for choice
Injection site:
- Latex or latex free
- Y-site, straight tube or ball shape tube for option
- Needle free is available;
Connector:
- Avaliable with Luer slip or luer lock connector
Product category: Disposable articles for hospitals
Burrette set
burette with bold graduation, soft and kink resistant PVC tubing 200cm, siliconized needle size 23Gx1'', drip chamber with fluid filter(15-20 micron) and air vent way, sharp airway plastic needle, flow rate: 60 drops/ml.
sizes:
100ML/11ML/150ML
sizes:
100ML/11ML/150ML
Product category: Disposable articles for hospitals
Scalp vein set
Needle:
- Beveled and siliconized needle facilitates atraumatic cannulation
- Thin wall provides better flow rate
- 18G-27G for option
- medical grade PVC or DEHP free
- Length is 300mm
- High flexible and kink resistant
- Butterfly shaped wings facilities trouble-free handing and attachment with the skin
- Color coded for instant identification of needle size
Product category: Disposable articles for hospitals
extension tube
Tube:
Component:
Y-injection site, latex tube, three-way stopcock and flow regulator for option
Pressure:
Low pressure or high pressure for choice
- Made of medical grade PVC or DEHP free
- Length is available from 15cm to 250cm
- High flexible and kink resistant
- Luer lock connector at both ends
- Rotating luer lock adapter is available, which reduce the risk of twisting of tubing during connection
Component:
Y-injection site, latex tube, three-way stopcock and flow regulator for option
Pressure:
Low pressure or high pressure for choice
Product category: Disposable articles for hospitals
IV cannula
Needle:
Flash Back Chamber
Each I.V. Catheter is provided with a threaded stopper
- Stainless 3-facet Needle point, siliconized for smooth and painless puncture
- 14G to 26G for option
- FEP material and latex free
- Special tapered, beveled tip and siliconized. The improved tip design minimizes the resistance during insertion
- Thin walled catheter allows maximum flow rate
Flash Back Chamber
- Unique air vented hub for higher flow rate and quick easy confirmation of correct vascular access
- Avoids blood spillage
- Prevents air bubbles
Each I.V. Catheter is provided with a threaded stopper
Product category: Catheters / urinary catheters and accessories
Silicone foley catheters
Surface:
Lateral Eyes:
Balloon:
2 way Pediatric Fr 06/08/10
2 way standard Fr12~Fr26
3 way standard Fr 16~Fr28
- Smooth surface and tip allows atraumatic insertion for enhanced patient conform
- Catheter with X-ray line
- Tip with X-ray line, easy for checking position of catheter tip
- 100% silicone with good biocompatibility, an alternative for patient who need a Latex Free catheter
- The maximum time to be kept inside bladder is no more than 28 days
Lateral Eyes:
- Less trauma to urethral mucosa
- Larger diameters maximize urine flow, and reducing clotting
Balloon:
- Silicone balloon is designed to retain its shape with good concentricity
- Silicone balloon with perfect rebound elasticity after deflation, less trauma and maximize patient comfort during removing catheter out of bladder through urethral
- Capacity ranges from 3ml-50ml
2 way Pediatric Fr 06/08/10
2 way standard Fr12~Fr26
3 way standard Fr 16~Fr28
Product category: Catheters / urinary catheters and accessories
Silicone foley catheter with temprature sensor
eatures:
- 100% silicone, medical-grade
- Length of 410mm
- Catheter with X-ray line
- Available with balloon in variety of capacity
- Monitor patient's bladder temperature to assist clinical diagnosis
- 100% silicone, medical-grade
- Length of 410mm
- Catheter with X-ray line
- Available with balloon in variety of capacity
- Monitor patient's bladder temperature to assist clinical diagnosis
Product category: Catheters / urinary catheters and accessories
Hematuria catheter
Natural latex, medical-grade
- Silicone coated or hydrophilic coated both available
- 2-way and 3-way are both available, 3-way type is more preferable in hospitals
- Reinforced design with nylon spiral to provide better flow and prevent collapse or block when doing suction with strong negative pressure
- Provide continuous irrigation
- Drainage speed more than 3 times of ordinary catheter
- Larger balloon 60=80 ml is available for hemostasis after prostatectomy surgery
- Silicone coated or hydrophilic coated both available
- 2-way and 3-way are both available, 3-way type is more preferable in hospitals
- Reinforced design with nylon spiral to provide better flow and prevent collapse or block when doing suction with strong negative pressure
- Provide continuous irrigation
- Drainage speed more than 3 times of ordinary catheter
- Larger balloon 60=80 ml is available for hemostasis after prostatectomy surgery
Product category: Catheters / urinary catheters and accessories
Latex malecot catheter
Surface:
Tip:
Types:
Intended for use:
- Smooth surface and tip allows atraumatic insertion for enhanced patient conform
- 100% silicone coated, good for patients with latex allergy
- Hydrophilic coating is available
Tip:
- Catheter end with four small wings
- Wings stabilize the catheter and hold it in place, reducing the risk of slipping out and dislodgment
Types:
- one way Fr 12-40
Intended for use:
- For temporary drainage in patient with incontinence or kidney stone
- Kidney stone can also be passed by inserting the malecot catheter directly into the urethra. The catheter act as a stent that will allow the stone to pass safely, and urine will be also drained
Product category: Catheters / urinary catheters and accessories
Latex urethral catheter
- Smooth surface and tip allows atraumatic insertion for enhanced patient conform
- 100% silicone coated, good for patients with latex allergy
- Latex for increased radiopacity and firmness
- Hydrophilic coating is available
Lateral Eyes:
- Less trauma to urethral mucosa
- Larger diameters maximize urine flow, and reducing clotting
Types:
- one way Fr 06-30
- Available with Coudé(tiemann) tip : catheter with a 45°bend at the tip, allows easier passage through an enlarged prostate
- Suitable for male and female catheterization
Product category: Catheters / urinary catheters and accessories
silicone male external catheter
Silicone type:
- 100% silicone, avoid allergic reaction to latex proteins
- The silicone is soft and breathable enough to make patients more comfortable
- Double sided adhesive tape increase patient comfort and ease of application. Its high quality aids in securment
- Visual inspection of skin without moving the catheter is workable
- Odor free
- 100% silicone, avoid allergic reaction to latex proteins
- The silicone is soft and breathable enough to make patients more comfortable
- Double sided adhesive tape increase patient comfort and ease of application. Its high quality aids in securment
- Visual inspection of skin without moving the catheter is workable
- Odor free
Product category: Catheters / urinary catheters and accessories
Ureteral stent kit
Intended use:
Ureteral stents are used to ensure the patency of a ureter, which may be compromised by a kidney stone, tumors, blood clots, postsurgical swelling. Or when an enlarged prostate pushes against the urethra, blocking the flow of urine, the placement of a stent can open the obstruction. Or following an operation on the ureters, it take time for the ureters to heal and a temporary measure to prevent obstruction becomes essential. Or there are damages to nerves controlling the bladder. The Ureteral stent help urine drain from the kidney to the bladder or to an external collection system.
- The ureteral stent is made from medical grade polyurethane material. It is a thin, flexible tube, durable and non-reactive
Surface:
Ureteral stents are used to ensure the patency of a ureter, which may be compromised by a kidney stone, tumors, blood clots, postsurgical swelling. Or when an enlarged prostate pushes against the urethra, blocking the flow of urine, the placement of a stent can open the obstruction. Or following an operation on the ureters, it take time for the ureters to heal and a temporary measure to prevent obstruction becomes essential. Or there are damages to nerves controlling the bladder. The Ureteral stent help urine drain from the kidney to the bladder or to an external collection system.
- The ureteral stent is made from medical grade polyurethane material. It is a thin, flexible tube, durable and non-reactive
Surface:
- Tapered tip and smooth surface ease the insertion and effective negotiation around obstructions
- Excellent radiopacity for improved visualization
- The stent softens up at body temperature promoting enhanced comfort and minimal friction
- Smoothly formed lateral eyes at both ends and larger inner lumen to facilitate drainage and patency
- Bladder markings to confirm placement
- Coiled ends with single / double pig-tails, can prevent it from moving out of place
- The stent is flexible enough to withstand various body movements
- Coiled ends with smoothly formed lateral eyes, ease the urine to be drained out
- Teflon coated
- Hydrophilic coated
- Zebra guidewire
Product category: Catheters / urinary catheters and accessories
double J stent
Intended use:
Ureteral stents are used to ensure the patency of a ureter, which may be compromised by a kidney stone, tumors, blood clots, postsurgical swelling. Or when an enlarged prostate pushes against the urethra, blocking the flow of urine, the placement of a stent can open the obstruction. Or following an operation on the ureters, it take time for the ureters to heal and a temporary measure to prevent obstruction becomes essential. Or there are damages to nerves controlling the bladder. The Ureteral stent help urine drain from the kidney to the bladder or to an external collection system.
- The ureteral stent is made from medical grade polyurethane material. It is a thin, flexible tube, durable and non-reactive
Surface:
Coiled ends (Pig-tails)
Ureteral stents are used to ensure the patency of a ureter, which may be compromised by a kidney stone, tumors, blood clots, postsurgical swelling. Or when an enlarged prostate pushes against the urethra, blocking the flow of urine, the placement of a stent can open the obstruction. Or following an operation on the ureters, it take time for the ureters to heal and a temporary measure to prevent obstruction becomes essential. Or there are damages to nerves controlling the bladder. The Ureteral stent help urine drain from the kidney to the bladder or to an external collection system.
- The ureteral stent is made from medical grade polyurethane material. It is a thin, flexible tube, durable and non-reactive
Surface:
- Tapered tip and smooth surface ease the insertion and effective negotiation around obstructions
- Excellent radiopacity for improved visualization
- The stent softens up at body temperature promoting enhanced comfort and minimal friction
- Smoothly formed lateral eyes at both ends and larger inner lumen to facilitate drainage and patency
- Bladder markings to confirm placement
Coiled ends (Pig-tails)
- Coiled ends with single / double pig-tails, can prevent it from moving out of place
- The stent is flexible enough to withstand various body movements
- Coiled ends with smoothly formed lateral eyes, ease the urine to be drained out
Product category: Catheters / urinary catheters and accessories
Economic Urine bag
Inlet tube:
- Smooth surface and kink-resistant
- With conical connector with steps, provide an easy and firm connection to the drainage catheters
- Available with outlet Push-Pull valve, Screw valve and T valve
- Push-Pull valve/ Screw valve: for easy emptying and minimal spillage
- T valve: for easy one-handed bag drainage
- With non-return valve to avoid the back flow of urine, increase patient safety
- With graduated scales printed on
- Color with White or Transparent
- Bag capacity with 1000/1500/2000 ml
Product category: Catheters / urinary catheters and accessories
Simple luxury urine bag
Inlet tube:
T valve: for easy one-handed bag drainage
Bag:
- Smooth surface and kink-resistant
- At length of 90 cm, other lengths available as per request
- With conical connector, provide an easy and firm connection to the drainage catheters
- With needleless sample port for safe urine sampling
T valve: for easy one-handed bag drainage
Bag:
- With non-return valve to avoid the back flow of urine, increase patient safety
- With graduated scales printed on
- Color with White or Transparent
- Bag capacity with 2000ml for standard use
Product category: Catheters / urinary catheters and accessories
urine leg bag
Inlet tube:
Outlet:
Bag:
- Smooth surface and kink-resistant
- Tube length available as per request
- With conical connector with steps, provide an easy and firm connection to the drainage catheters
Outlet:
- Available with outlet Push-Pull valve, Screw valve and T valve
- Push-Pull valve/ Screw valve: for easy emptying and minimal spillage
- T valve: for easy one-handed bag drainage
Bag:
- With non-return valve to avoid the back flow of urine, increase patient safety
- With graduated scales printed on
- Color with White or Transparent
- Bag capacity with 500/750/1000ml
- With latex –free elastic straps pre-connected to each bag, convenient for tying on thigh with optional elastic straps
- Available with Non-woven Back side, maximize patient comfort
Product category: Catheters / urinary catheters and accessories
Luxury urine bag
Inlet tube:
Outlet:
T valve: for easy one-handed bag drainage
Bag:
- Smooth surface and kink-resistant
- At length of 90 cm, other lengths available as per request
- With conical connector, provide an easy and firm connection to the drainage catheters
- With needleless sample port for safe urine sampling
- With adjustable bed-sheet clamp for securing drain bag tubing. With tube clamp for stopping the urine flow when required
- Anti-reflux chamber provides reflux protection without mechanical parts to hinder flow, minimize back flow and increase patient safety. Non-wettable air filter, helps prevent vacuum action and facilitate drainage
Outlet:
T valve: for easy one-handed bag drainage
Bag:
- With non-return valve to avoid the back flow of urine, increase patient safety
- Bag capacity with 2000 ml for standard use; 4000 ml for use with continuous bladder irrigation
- Bag with air filter to help prevent vacuum action and facilitate drainage
Product category: Catheters / urinary catheters and accessories
Urine meter
inlet tubing:
Outlet:
T valve: for easy one-handed bag drainage
Meter:
- Smooth surface and kink-resistant
- At length 120cm, other lengths available as per request
- With conical connector, provide an easy and firm connection to the drainage catheters
- With needleless sample port for safe urine sampling
- With adjustable bed-sheet clamp for securing drain bag tubing. With tube clamp for stopping the urine flow when required
- Reinforced hander with built-in anti-kink drain tube guide
- Anti-reflux chamber provides reflux protection without mechanical parts to hinder flow, minimize back flow and increase patient safety. Non-wettable air filter, helps prevent vacuum action and facilitate drainage
Outlet:
T valve: for easy one-handed bag drainage
Meter:
- With non-return valve to avoid the back flow of urine, increase patient safety
- With graduated scales printed on
- Bag capacity with 2000/2600ml
- Bag with air filter to help prevent vacuum action and facilitate drainage
Product category: OT face masks, OT cap-disposables
Surgical face mask
SURGICAL FACE MASK (Type IIR)
BFE≥98%
PFE≥98%
-Three-layer folding design
-Elastic earloops
-Flexible noseband and soft metal make the disposable face mask fit your face better
Size 17.5x9.5CM
Colour blue
Polypropylene inner and outer facing assures comfortable on the inside and protection on the outside.;
Conform with EN14683 Type IIR
Certificate CE, GB
Box of 50
BFE≥98%
PFE≥98%
-Three-layer folding design
-Elastic earloops
-Flexible noseband and soft metal make the disposable face mask fit your face better
Size 17.5x9.5CM
Colour blue
Polypropylene inner and outer facing assures comfortable on the inside and protection on the outside.;
Conform with EN14683 Type IIR
Certificate CE, GB
Box of 50
Product category: OT face masks, OT cap-disposables
FF2 face mask-fold type
Filter performance ≥ 94%
Flow rate 95 L/min
Total inward leakage (TIL)* – tested on human subjects each performing exercises≤ 8% leakage (arithmetic mean)
Inhalation resistance – max pressure drop ≤ 70 Pa (at 30 L/min) ≤ 240 Pa (at 95 L/min) ≤ 500 Pa (clogging)
Exhalation resistance - max pressure drop ≤ 300 Pa
Flow rate 160 L/min
CO2 clearance requirement≤ 1%
Flow rate 95 L/min
Total inward leakage (TIL)* – tested on human subjects each performing exercises≤ 8% leakage (arithmetic mean)
Inhalation resistance – max pressure drop ≤ 70 Pa (at 30 L/min) ≤ 240 Pa (at 95 L/min) ≤ 500 Pa (clogging)
Exhalation resistance - max pressure drop ≤ 300 Pa
Flow rate 160 L/min
CO2 clearance requirement≤ 1%
Product category: OT face masks, OT cap-disposables
FFP2-cup type
Filter performance ≥ 94%
Flow rate 95 L/min
Total inward leakage (TIL)* – tested on human subjects each performing exercises≤ 8% leakage (arithmetic mean)
Inhalation resistance – max pressure drop ≤ 70 Pa (at 30 L/min) ≤ 240 Pa (at 95 L/min) ≤ 500 Pa (clogging)
Exhalation resistance - max pressure drop ≤ 300 Pa
Flow rate 160 L/min
CO2 clearance requirement≤ 1%
Flow rate 95 L/min
Total inward leakage (TIL)* – tested on human subjects each performing exercises≤ 8% leakage (arithmetic mean)
Inhalation resistance – max pressure drop ≤ 70 Pa (at 30 L/min) ≤ 240 Pa (at 95 L/min) ≤ 500 Pa (clogging)
Exhalation resistance - max pressure drop ≤ 300 Pa
Flow rate 160 L/min
CO2 clearance requirement≤ 1%
Product category: OT face masks, OT cap-disposables
FFP3 face mask
The FFP3 mask is the most filtering of the FFP masks. It protects against very fine particles such as asbestos and ceramic. It does not protect against gases and in particular nitrogen oxide.
Aerosol filtration percentage: Not less than 99%.
Internal leak rate: Maximum 2%
Aerosol filtration percentage: Not less than 99%.
Internal leak rate: Maximum 2%
Product category: OT face masks, OT cap-disposables
KN95 face mask
Nonwoven Fabric
5 ply (100% new material)
1st ply: 50g leak proof Non-Woven Fabric
2nd ply: 40g Ethylene-Propylene Side By Side
3rd ply: 25g High Density Fliter Layer
4th ply: 25g High Density Fliter Layer
5th ply: 20g Direct Contact Skin Layer
Filling Meltblown Nonwoven Fabric
Size: 16×11cm
Color: white
Certificate: CE
Filters at least 95% of airborne particles
Only effective in the absence of oil particles, such as lubricants, cutting fluids, or glycerine
5 ply (100% new material)
1st ply: 50g leak proof Non-Woven Fabric
2nd ply: 40g Ethylene-Propylene Side By Side
3rd ply: 25g High Density Fliter Layer
4th ply: 25g High Density Fliter Layer
5th ply: 20g Direct Contact Skin Layer
Filling Meltblown Nonwoven Fabric
Size: 16×11cm
Color: white
Certificate: CE
Filters at least 95% of airborne particles
Only effective in the absence of oil particles, such as lubricants, cutting fluids, or glycerine
Product category: OT face masks, OT cap-disposables
KN95 face mask with valve
Nonwoven Fabric
5 ply (100% new material)
1st ply: 50g leak proof Non-Woven Fabric
2nd ply: 40g Ethylene-Propylene Side By Side
3rd ply: 25g High Density Fliter Layer
4th ply: 25g High Density Fliter Layer
5th ply: 20g Direct Contact Skin Layer
Filling Meltblown Nonwoven Fabric
Size: 16×11cm
Color: white
Certificate: CE
Filters at least 95% of airborne particles
Only effective in the absence of oil particles, such as lubricants, cutting fluids, or glycerine
5 ply (100% new material)
1st ply: 50g leak proof Non-Woven Fabric
2nd ply: 40g Ethylene-Propylene Side By Side
3rd ply: 25g High Density Fliter Layer
4th ply: 25g High Density Fliter Layer
5th ply: 20g Direct Contact Skin Layer
Filling Meltblown Nonwoven Fabric
Size: 16×11cm
Color: white
Certificate: CE
Filters at least 95% of airborne particles
Only effective in the absence of oil particles, such as lubricants, cutting fluids, or glycerine
Product category: Catheters / urinary catheters and accessories
PVC nelaton catheter
Catheter:
- Smooth surface and tip allows atraumatic insertion for enhanced patient conform
- Kink-resistant PVC tube, can be clear or frosted
- Available with X-ray line
- For short term bladder catheterization through urethra
- Available with Coudé tip
- Smoothly formed and less trauma
- Larger diameters maximize flow rate
- Universal funnel shaped connector for safe connection to urine bags
- Color coded connecters for fast size identification
- Female type at the length of 22cm
- Male type at the length of 40cm
Product category: Disposable articles for hospitals
Closed wound drainage system(Spring)
- This product includes 3-spring evacuator, PVC tubing, Y connector, PVC drainage tube and stainless steel trocar.
- The design of 3-spring evacuator minimizes the Collapse-Resistance.
- The PVC drainage tube inside can be replaced by our other silicone drains, if need.
- The design of 3-spring evacuator minimizes the Collapse-Resistance.
- The PVC drainage tube inside can be replaced by our other silicone drains, if need.
Product category: Disposable articles for hospitals
Silicone reservoir
- Made of imported medical grade silicone.
- Provided with internal anti-reflux valve.
- Bulb silicone walls provide easy activation of suction.
- Regular system is to be used together with silicone flat drains, but we also recommend innovative solutions which are combined with our round fluted drains or round perforated drains.
- size: 100ML/150ML/200ML/400ML
- Provided with internal anti-reflux valve.
- Bulb silicone walls provide easy activation of suction.
- Regular system is to be used together with silicone flat drains, but we also recommend innovative solutions which are combined with our round fluted drains or round perforated drains.
- size: 100ML/150ML/200ML/400ML
Product category: Disposable articles for hospitals
Drainage bag
- The drainage bag is designed to be connected with our silicone reservoir to collect, store and record the fluid after the surgeries.
- Be equipped with internal one-way valve to prevent reflux.
- Be equipped with an extension PVC tube and a luer lock to be connected with our silicone reservoir.
- Can be replaced individually.
- 1000ML
- Be equipped with internal one-way valve to prevent reflux.
- Be equipped with an extension PVC tube and a luer lock to be connected with our silicone reservoir.
- Can be replaced individually.
- 1000ML
Product category: Disposable articles for hospitals
Silicone flat fluted drains
- Made of imported medical grade silicone.
- Flat four channels shape allows for greater muti-channel drainage.
- Channel drain offers important advantage over regular perforated drains by capillary effect.
- Radio-opaque line for easy X-ray visualization
- Available with or without “Three Face” stainless steel trocar
- Flat four channels shape allows for greater muti-channel drainage.
- Channel drain offers important advantage over regular perforated drains by capillary effect.
- Radio-opaque line for easy X-ray visualization
- Available with or without “Three Face” stainless steel trocar
Product category: Disposable articles for hospitals
Enema bag set
Features:
- Bag 1500ml without non-return valve (same as plasti-med bag)
- tubing length 115 cm, tube end with standard cap, with tube clip
- Tube end is coated with Vaseline, easy and smooth for insertion
- PE glove 1 pc
- with moistureproof drape 42*45 cm
- Bag 1500ml without non-return valve (same as plasti-med bag)
- tubing length 115 cm, tube end with standard cap, with tube clip
- Tube end is coated with Vaseline, easy and smooth for insertion
- PE glove 1 pc
- with moistureproof drape 42*45 cm
Product category: Disposable articles for hospitals
Hemodialyzer
Features:
- Type:Low Flux Hemodialyzer & High Flux Hemodialyzer
- Membrane material:Medical-grade Polyether sulfone (PES)
- Housing & Blooding caps Material:Medical-grade Polycarbonate(PC)
- Potting sealants Material:Bi-component polyurethane sealants(PU)
- Inner diameter of membrance (um):200
- Wall thickness of membrance (um):40
- Type:Low Flux Hemodialyzer & High Flux Hemodialyzer
- Membrane material:Medical-grade Polyether sulfone (PES)
- Housing & Blooding caps Material:Medical-grade Polycarbonate(PC)
- Potting sealants Material:Bi-component polyurethane sealants(PU)
- Inner diameter of membrance (um):200
- Wall thickness of membrance (um):40
About us
Company details
Hitec Medical Co., Ltd is established over 10 years, which oversea marketing office located in shanghai, and prodcution site in Jiangsu province.
we're a China-based hospital and home care solutions company, a professional manufacturer on disposable medical products mainly including Respiratory, Anesthesiology, Urology, PVC catheters, Silicone tubes and infusion therapy.
Hitec products are CE, ISO and FDA approval.
With fast development on China economy and technology, Hitec is able to apply most advanced technology for production line, to employ well-educated and trained people for producing and professional auditors for quality control, and to establish satisfied production environment for producing, packing and sterilizing. All these factors ensure Hitec quality well-accepted by esteemed customers.
It will be the great honor of Hitec Medical to bring with high-quality and cost-effective care to hospital and home patients all over the world.
You are welcome to contact us for establishing long-term business relationship.
we're a China-based hospital and home care solutions company, a professional manufacturer on disposable medical products mainly including Respiratory, Anesthesiology, Urology, PVC catheters, Silicone tubes and infusion therapy.
Hitec products are CE, ISO and FDA approval.
With fast development on China economy and technology, Hitec is able to apply most advanced technology for production line, to employ well-educated and trained people for producing and professional auditors for quality control, and to establish satisfied production environment for producing, packing and sterilizing. All these factors ensure Hitec quality well-accepted by esteemed customers.
It will be the great honor of Hitec Medical to bring with high-quality and cost-effective care to hospital and home patients all over the world.
You are welcome to contact us for establishing long-term business relationship.
Company data
Sales volume10-49 Mio US $
Export content> 75%
Number of employees100-499
Area of businessCommodities and Consumer Good for Surgeries and Hospitals