Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
CONSOBIONET Consorzio con attività esterna
Via Fernando Malavolti No. 5,
41122
Modena
Italy
Italy
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Contact
Giancarlo Passacqua
President
Giancarlo Passacqua
Managing Director
Rinaldo Buffagni
Antonino Cuzzucoli
Via Trapezzoli 44
89134 S. Gregorio - Reggio Calabria, Italy
Phone
+39-(0)965-630577
Email
info@mediline.eu
Ernesto Giacometti
Nicola Nardo
Via Marconi 16 - zi Caselle
35030 Selvazzano Dentro (PD), Italy
Phone
+39-(0)49-630844
Email
info@silplastsrl.it
Lorenzo Rosato
Domenico Scardovi
Via Dell'Industria 49
48014 Castel Bolognese (BO), Italy
Phone
+39-(0)546-656845
Email
deas@deasnet.it
Giuliano Paltrinieri
Andrea Roberto
Via Giulio Pastore 33-35 - Fraz. Nigoline
25040 Corte Franca (BS), Italy
Phone
+39-(0)30-9860511
Email
info@marfranmed.it
Alice Brambilla
Via Montegrappa 24/26
41040 Ubersetto di Fiorano (MO), Italy
Phone
+39-(0)536-843826
Marco Rubbi
Via Rosa Bardelli 2b
44011 Consandolo (FE), Italy
Phone
+39-(0)532-858883
+39-(0)532-858666
Alberto Kinzer
Via del Perlar 37/A
37135 Verona (VR), Italy
Phone
+39-(0)45-4647576
Please log in
You must be logged in to use matchmaking
Please log in for matchmaking
Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.
Let's get started!
Welcome to Matchmaking. Would you like to get in touch with ?
Our range of products
Product categories
- 01 Electromedical equipment / medical technology
- 01.01 Diagnostics
- 01.01.04 Colposcopes, equipment for gynaecological investigation and diagnosis
Colposcopes, equipment for gynaecological investigation and diagnosis
- 01 Electromedical equipment / medical technology
- 01.03 Surgery devices, endoscopy devices
- 01.03.02 Instruments for the minimal-invasive surgery (MIS)
Instruments for the minimal-invasive surgery (MIS)
- 01 Electromedical equipment / medical technology
- 01.04 Therapy and physical medicine
- 01.04.01 Dialysis testing and monitoring equipment
Dialysis testing and monitoring equipment
- 01 Electromedical equipment / medical technology
- 01.10 Hygiene / sterilisation / disinfection
- 01.10.01 Sterilisation equipment, disinfection equipment and accessories, autoclaves
Sterilisation equipment, disinfection equipment and accessories, autoclaves
- 01 Electromedical equipment / medical technology
- 01.10 Hygiene / sterilisation / disinfection
- 01.10.02 Biological indicators for sterilisation
Biological indicators for sterilisation
- 04 Physiotherapy / orthopaedic technology
- 04.13 Orthopaedic feet aids, shoes and insoles
Orthopaedic feet aids, shoes and insoles
- 05 Commodities and consumer goods
- 05.07 Disposables
- 05.07.01 Disposable articles for hospitals
Disposable articles for hospitals
- Medifly srl - FLYVAC - systems for surgery suction
- Medifly srl - THORAFLY - Thoracic drainage systems
- Medifly srl - UROFLY & METERFLY - systems for urine collection
- Medifly srl - DRENOFLY - Wound drainage systems
- Medifly srl - FLYLINE - Systems for infusion irrigation and washing
- Medifly srl - MEDICAL COMPONENTS
- Medifly srl - TUBES & TUBULARS for medical applications
- Silplast srl - MEDICAL COMPONENTS - GENERIC BLOW MOULDING
- Deas - MEDICAL DEVICES
- Gps - MEDICAL DEVICES - MEDICAL DEVICES ASSEMBLING
- Alkimia - LABORATORY INSTRUMENTS AND REAGENTS
- Linaus srl - MEDICAL DEVICES - RESEARCH & DEVELOPMENT
- Francesco Franceschetti Elastomeri - PLASTIC MATERIALS
- Modenplast - PLASTIC MATERIAL EXTRUSION - MACHINES FOR PLASTIC MATERIAL PROCESSING
- Tecno system - MACHINES FOR PLASTIC MATERIAL PROCESSING
- 05 Commodities and consumer goods
- 05.14 Personal protective equipment
- 05.14.05 Working clothes and protective clothing
Working clothes and protective clothing
Our products
Product category: Sterilisation equipment, disinfection equipment and accessories, autoclaves, Biological indicators for sterilisation
Medifit srl - MEDICAL PACKAGING FOR STERILIZATION
Contacts: Mr Rinaldo Buffagni - tel: +39-(0)535-1814919 - info@medifit.tech
Medifit srl is a new company where co-exist young professional and dynamic people,and other figures with thirty years experience in the biomedical field. The collaboration with major industrial groups facilitates the supply of raw materials and high quality production using advanced instruments. The company is specialized in the manufacture of medical packaging for sterilization and controls for sterilization, reserved at the local and foreign markets. Raw materials certified according to current regulations and strict controls during the production, guarantee high quality of the products during the time.
Medifit srl is a new company where co-exist young professional and dynamic people,and other figures with thirty years experience in the biomedical field. The collaboration with major industrial groups facilitates the supply of raw materials and high quality production using advanced instruments. The company is specialized in the manufacture of medical packaging for sterilization and controls for sterilization, reserved at the local and foreign markets. Raw materials certified according to current regulations and strict controls during the production, guarantee high quality of the products during the time.
Product category: Disposable articles for hospitals
Medifly srl - FLYVAC - systems for surgery suction
Contacts: Mr Passacqua Giancarlo - tel +39-(0)535-52741 - info@medifly.it
Medifly srl realizes and distributes FLYVAC products (systems for surgery suctions)
- SUCTION TUBES with connectors - different models available
- SUCTION TUBES with costant cross section - different models available
- SUCTION BUBBLE TUBES - different models available
- ASPIRATION CANNULA yankauer type - different models available
Please see more details in the catalogue here attached.
Product category: Disposable articles for hospitals
Medifly srl - THORAFLY - Thoracic drainage systems
Contacts: Mr Passacqua Giancarlo - tel +39-(0)535-52741 - info@medifly.it
Medifly srl realizes and distributes THORAFLY products (thoracic drainage systems).
Our range includes:
*COMPLETE THORACIC DRAINAGE SYSTEM - different models available
-Adjustable plastic system with one bottle (bottle version: 150ml pediatric version, 1000ml, 2000ml, 3000ml)
-Not adjustable plastic system with one bottle (bottle version: 2000ml, 3000ml)
-Vacuum regolation system for wall - adjustable
-Adjustable plastic systems with one bottle and THORABLOCK system
-Adjustable plastic systems with two bottles and THORABLOCK system
-Plastic system with two bottles
-Glass systems with one bottle or two bottles
-Plastic system with unidirectional valve - not adjustable
*SPARE TUBES for thoracic drainage systems
*SPARE BOTTLE for thoracic drainage systems
*THORACENTESIS PARACENTESIS SETS
*VERRES NEEDLE
*HEIMLICH VALVES
Product category: Disposable articles for hospitals
Medifly srl - UROFLY & METERFLY - systems for urine collection
Contacts: Mr Passacqua Giancarlo - tel +39-(0)535-52741 - info@medifly.it
Medifly realizes and distributes UROFLY and METERFLY products (systems for urine collection).
Our range includes:
-BAGS FOR URINE COLLECTION - closed circuit - different models and bag capacity available (2.5 l, 3.5 l, 5 l, 8 l, 14 l)
-URINOMETER - with 4 chambers - different models available
-BAGS FOR DISCHARGE / SPARE BAGS - different models available
Please see more details in the catalogue here attached
Medifly realizes and distributes UROFLY and METERFLY products (systems for urine collection).
Our range includes:
-BAGS FOR URINE COLLECTION - closed circuit - different models and bag capacity available (2.5 l, 3.5 l, 5 l, 8 l, 14 l)
-URINOMETER - with 4 chambers - different models available
-BAGS FOR DISCHARGE / SPARE BAGS - different models available
Please see more details in the catalogue here attached
Product category: Disposable articles for hospitals
Medifly srl - DRENOFLY - Wound drainage systems
Contacts: Mr Passacqua Giancarlo - tel +39-(0)535-52741 - info@medifly.it
Medifly srl realizes DRENOFLY products (wound drainage systems).
Our range includes:
-WOUND DRAINAGE COMPLETE SYSTEMS in different models (closed circuits, with catheter and trocar, bellow capacity 300ml, 500ml, 700ml) etc..
-ACCESSORIES AND SPARE PARTS in different models
-DRAINAGE SYSTEM FOR NEGATIVE WOUND PRESSURE THERAPY (NWPT)
Please see more info in the catalogue here attached.
Medifly srl realizes DRENOFLY products (wound drainage systems).
Our range includes:
-WOUND DRAINAGE COMPLETE SYSTEMS in different models (closed circuits, with catheter and trocar, bellow capacity 300ml, 500ml, 700ml) etc..
-ACCESSORIES AND SPARE PARTS in different models
-DRAINAGE SYSTEM FOR NEGATIVE WOUND PRESSURE THERAPY (NWPT)
Please see more info in the catalogue here attached.
Product category: Disposable articles for hospitals
Medifly srl - FLYLINE - Systems for infusion irrigation and washing
Contacts: Mr Passacqua Giancarlo - tel +39-(0)535-52741 - info@medifly.it
Medifly realizes and distributes FLYLINE products (systems for infusion irrigation and washing).
Our range includes:
-SYSTEMS FOR C.P.V MEASURNIG
-SYSTEMS FOR IRRIGATION AND WASHING for Urology & Arthroscopy
Different models available.
Please see mode info in the catalogue here attached
Medifly realizes and distributes FLYLINE products (systems for infusion irrigation and washing).
Our range includes:
-SYSTEMS FOR C.P.V MEASURNIG
-SYSTEMS FOR IRRIGATION AND WASHING for Urology & Arthroscopy
Different models available.
Please see mode info in the catalogue here attached
Product category: Disposable articles for hospitals
Medifly srl - MEDICAL COMPONENTS
Contacts: Mr Passacqua Giancarlo - tel +39-(0)535-52741 - info@medifly.it
Medifly realizes and distrubutes vary models of medical components for medical devices.
Some examples:
-bags for liquid collection
-accessories for bags
-bottles for liquid collections
-bottles accessories
-cannula
-aspiration bellows
-various components
Please see the catalogue here attached.
Product category: Disposable articles for hospitals
Medifly srl - TUBES & TUBULARS for medical applications
Contacts: Mr Passacqua Giancarlo - tel +39-(0)535-52741 - info@medifly.it
Medifly realizes vary models of TUBES & TUBULARS for medical applications.
Some examples:
-PVC DEHT tubes
-PVC NO DOP (TOTM) tubes
-POLYETHYLENE LOW DENSITY PELD tubes
-POLYURETHANE tubes
-PVC/PU COEXTRUDED tubes
-TRIFLEX FLY tubes
-SILICONE tubes
-PVC DOP & PVC NO DOP tubulars
-EVA tubulars
Medifly realizes vary models of TUBES & TUBULARS for medical applications.
Some examples:
-PVC DEHT tubes
-PVC NO DOP (TOTM) tubes
-POLYETHYLENE LOW DENSITY PELD tubes
-POLYURETHANE tubes
-PVC/PU COEXTRUDED tubes
-TRIFLEX FLY tubes
-SILICONE tubes
-PVC DOP & PVC NO DOP tubulars
-EVA tubulars
Product category: Disposable articles for hospitals, Dialysis testing and monitoring equipment
Silplast srl - MEDICAL COMPONENTS - GENERIC BLOW MOULDING
Contacts: Mr Nicola Nardo - tel +39-(0)49-630844 - info@silplastsrl.it
SPECIALIZATION AS BUSINESS CHOICE
Silplast is a well-known firm whose greatest asset is the strong know-how that derives from its decade-long experience in the field of plastic.
Nowadays the survival of a firm depends on its ability and courage to make important choices, in line with the requests of a more and more demanding and selective market.
From birth, Silplast has decided to bet on specialization as business philosophy. Today the company is a worldwide leader in the production of expansion chambers for haemodialysis and customized items for the medical industry. All the articles are manufactured solely through a sophisticated blow molding technology whose division is named MEDICAL COMPONENTS.
Differently, GENERIC BLOW MOLDING ARTICLES deals in articles for the industrial sector. With its intention of starting up several divisions, Silplast confirms its will to develop deep and specific expertise.
Right from birth, in 1994, the reality of this company is fully Italian and today our market is the world.
SPECIALIZATION AS BUSINESS CHOICE
Silplast is a well-known firm whose greatest asset is the strong know-how that derives from its decade-long experience in the field of plastic.
Nowadays the survival of a firm depends on its ability and courage to make important choices, in line with the requests of a more and more demanding and selective market.
From birth, Silplast has decided to bet on specialization as business philosophy. Today the company is a worldwide leader in the production of expansion chambers for haemodialysis and customized items for the medical industry. All the articles are manufactured solely through a sophisticated blow molding technology whose division is named MEDICAL COMPONENTS.
Differently, GENERIC BLOW MOLDING ARTICLES deals in articles for the industrial sector. With its intention of starting up several divisions, Silplast confirms its will to develop deep and specific expertise.
Right from birth, in 1994, the reality of this company is fully Italian and today our market is the world.
Product category: Instruments for the minimal-invasive surgery (MIS)
Medi Line - DISPOSABLE MEDICAL DEVICES
Contacts: Mr Antonino Cuzzucoli - tel: +39-(0)965-630577 - info@mediline.eu
Medi Line has a long experience in the Biomedical field and in particular in medical devices field, having represented for many years the most qualified national and international brands of technology products for the different branches of the specialized medicine.
The know-how acquired, the constant care and the targeted investments, led the company to develop an activity of production, 100% Italian, qualifying Medi Line as the unique Italian producer of “Anti-contamination I.V. device” and “Laparoscopic Trocar”.
Our headquarters are located in the Southern Industrial area of Reggio Calabria nearby the airport and the main connecting roads and railways. Counts on a modern structure which houses the production plant, warehouse and commercial offices.
The company has its own technical department where are developed the projects, the prototyping and the engineering of new products, and has consolidated cooperation relationships with hospitals and University Centers for the experimentation of the pre-series of them.
The manufacture of the products branded Medi Line takes place in a contamination controlled environment (Clean Room) according to the rules of ISO 7 (class 10.000), within which are developed:
Department of plastic molding, with last generation injection molding machines, 3 horizontal and 1 vertical, able to produce, starting from the granule of raw material, components in plastic material such as polycarbonate, abs, polypropylene, polyethylene, polyurethane, pvc, ecc.., including the thermoplastic rubbers.
Department of assembly consists of 12 units provided with all the equipment necessary for the assembly of semi-finished products, complete with sophisticated equipments for the management of the quality controls in process.
Department of packaging equipped with a modern automatic blistering system with thermoforming with two outputs. Designed for both rigid and flexible packaging and with automatic management of batch and labeling.
Department of ETO Sterilization The system, controlled by a sophisticated management computerized system, has a productive capacity of 6 mc for a cycle of 7 hours. Our operators are specialized and qualified with regular license issued by the competent institutions.
Our products:
In addition to manufacturing some generic components for the drug infusion, the main productive activity of the company is directed to highly specialized product lines covered by Industrial patents.
SECURA
It is a product line specifically designed to protect both healthcare operators and patients from the risk of contamination with potentially infected blood during venous or arterial cannulation. Secura has been validated and certified by the “Istituto Superiore di Sanità” and represents, in relation to international guidelines and the regulation of the Italian Legislative Decree for Security n. 81/08, the safest system existing on the market today. This product line is distributed directly or through qualified dealers, throughout the national territory.
NEOVAC
A range of technical solutions, adopted to facilitate the procedures of suction of liquids during neurosurgery have conducted the company to build special kits with mouldable and interchangeable cannulas whose characteristics make these products unique in the market.
X-ONE
The exponential diffusion of laparoscopic procedures in the various surgical specialties registered in the last years, has led our company to develop a line of high quality devices for the laparoscopic access, which has allowed to our brand the entry into the foreign market.
ISI STER
It is a new product line branded Medi Line, Peracetic Acid based. It is a hydrosoluble powder, particularly suitable for the cold chemical sterilization of endocopes, surgical instruments and medical devices.
Marketing
In addition to the normal promotional activities carried out by our experts, the scientific information to healthcare operators is constantly supervised by adequately trained Product Specialists who are able to provide all the necessary support to our customers.
The company, also promotes training courses for medical and paramedical staff and participates to the main congresses of medicine and surgery concerning the sector of interest.
Mission
Today, our mission is to research and develop innovative solutions appropriate to the specific needs which enables the manufacture of exclusive products designed to best meet the expectations of healthcare professionals and their patients.
Medi Line has a long experience in the Biomedical field and in particular in medical devices field, having represented for many years the most qualified national and international brands of technology products for the different branches of the specialized medicine.
The know-how acquired, the constant care and the targeted investments, led the company to develop an activity of production, 100% Italian, qualifying Medi Line as the unique Italian producer of “Anti-contamination I.V. device” and “Laparoscopic Trocar”.
Our headquarters are located in the Southern Industrial area of Reggio Calabria nearby the airport and the main connecting roads and railways. Counts on a modern structure which houses the production plant, warehouse and commercial offices.
The company has its own technical department where are developed the projects, the prototyping and the engineering of new products, and has consolidated cooperation relationships with hospitals and University Centers for the experimentation of the pre-series of them.
The manufacture of the products branded Medi Line takes place in a contamination controlled environment (Clean Room) according to the rules of ISO 7 (class 10.000), within which are developed:
Department of plastic molding, with last generation injection molding machines, 3 horizontal and 1 vertical, able to produce, starting from the granule of raw material, components in plastic material such as polycarbonate, abs, polypropylene, polyethylene, polyurethane, pvc, ecc.., including the thermoplastic rubbers.
Department of assembly consists of 12 units provided with all the equipment necessary for the assembly of semi-finished products, complete with sophisticated equipments for the management of the quality controls in process.
Department of packaging equipped with a modern automatic blistering system with thermoforming with two outputs. Designed for both rigid and flexible packaging and with automatic management of batch and labeling.
Department of ETO Sterilization The system, controlled by a sophisticated management computerized system, has a productive capacity of 6 mc for a cycle of 7 hours. Our operators are specialized and qualified with regular license issued by the competent institutions.
Our products:
In addition to manufacturing some generic components for the drug infusion, the main productive activity of the company is directed to highly specialized product lines covered by Industrial patents.
SECURA
It is a product line specifically designed to protect both healthcare operators and patients from the risk of contamination with potentially infected blood during venous or arterial cannulation. Secura has been validated and certified by the “Istituto Superiore di Sanità” and represents, in relation to international guidelines and the regulation of the Italian Legislative Decree for Security n. 81/08, the safest system existing on the market today. This product line is distributed directly or through qualified dealers, throughout the national territory.
NEOVAC
A range of technical solutions, adopted to facilitate the procedures of suction of liquids during neurosurgery have conducted the company to build special kits with mouldable and interchangeable cannulas whose characteristics make these products unique in the market.
X-ONE
The exponential diffusion of laparoscopic procedures in the various surgical specialties registered in the last years, has led our company to develop a line of high quality devices for the laparoscopic access, which has allowed to our brand the entry into the foreign market.
ISI STER
It is a new product line branded Medi Line, Peracetic Acid based. It is a hydrosoluble powder, particularly suitable for the cold chemical sterilization of endocopes, surgical instruments and medical devices.
Marketing
In addition to the normal promotional activities carried out by our experts, the scientific information to healthcare operators is constantly supervised by adequately trained Product Specialists who are able to provide all the necessary support to our customers.
The company, also promotes training courses for medical and paramedical staff and participates to the main congresses of medicine and surgery concerning the sector of interest.
Mission
Today, our mission is to research and develop innovative solutions appropriate to the specific needs which enables the manufacture of exclusive products designed to best meet the expectations of healthcare professionals and their patients.
Product category: Orthopaedic feet aids, shoes and insoles, Working clothes and protective clothing
Rosato - SANITARY CLOGS
Contacts: Mr Lorenzo Rosato - Ms Giulia Martinello - tel: +39-(0)423-55621 - info@rosatoclogs.com
Rocca Group S.r.l. Is an important italian company of Asolo (TV), which operates in the field of hot stamping of plastic since 1980. From this long experience comes the RosatoClogs brand, which today produces several lines of professional rubber footwear for healthcare and not. With the help of modern machineries and a highly skilled manpower Rocca Group S.r.l. is now able to work with the best quality standards in the market and export its products worldwide.
All the production steps are realized in our factory in Italy (Injection, quality check and packaging).
RosatoClogs are born for sanitary and hospital use, for their technical-constructive features, attention to details and great comfort, our clogs line is suitable for a large number of professional uses, even the hardest.
Our footwears have Compliance certification CE that follows the rules EN ISO 20344:11 and EN ISO 20347:2012 OB A E SRC for warranty of quality.
Footwears's Features:
-Anatomic (they fit the shape of the feet for the best comfort)
-Areated with antislip sole
-Completely realized with antistatic material
-Sterelizable and washable in washing-machine at 134°.
Product category: Disposable articles for hospitals
Deas - MEDICAL DEVICES
Contact: Mr Domenico Scardovi - tel: +39-(0)544-656845 - deas@deasnet.it
DEAS manufactures medical devices for any respiratory application in Operating Rooms, Anaesthesia, Intensive Care Units (ICU), Neonatal Intensive Care Units (NICU), Coronary Care Units (CCU), Post-Anaesthesia Care Units (PACU), Respiratory Therapy (RT), Emergency Rooms (ER).
All core activities, such as designing, moulds manufacture, extrusion, injection and blow moulding, are carried out in our production facility with strict quality controls, to guarantee high reliability and service standards.
The expertise acquired in forming thermoplastics, associated with active research and a spirit of innovation, allow us to provide every breathing solution also on OEM basis.
Product families:
Breathing Systems for Active Humidification
Aerosol and Oxygentherapy devices
Airway Management devices
Breathing circuits
Catheter Mounts and Cobb connectors
Filters and HMEs
Fixation devices
Manual Breathing Units
Anaesthesia and NIV Masks
Breathing Exercisers
Swabs and Toothbrushes for Oral Care
Reservoir Bags
Tracheal Suctioning devices
DEAS manufactures medical devices for any respiratory application in Operating Rooms, Anaesthesia, Intensive Care Units (ICU), Neonatal Intensive Care Units (NICU), Coronary Care Units (CCU), Post-Anaesthesia Care Units (PACU), Respiratory Therapy (RT), Emergency Rooms (ER).
All core activities, such as designing, moulds manufacture, extrusion, injection and blow moulding, are carried out in our production facility with strict quality controls, to guarantee high reliability and service standards.
The expertise acquired in forming thermoplastics, associated with active research and a spirit of innovation, allow us to provide every breathing solution also on OEM basis.
Product families:
Breathing Systems for Active Humidification
Aerosol and Oxygentherapy devices
Airway Management devices
Breathing circuits
Catheter Mounts and Cobb connectors
Filters and HMEs
Fixation devices
Manual Breathing Units
Anaesthesia and NIV Masks
Breathing Exercisers
Swabs and Toothbrushes for Oral Care
Reservoir Bags
Tracheal Suctioning devices
Product category: Disposable articles for hospitals, Colposcopes, equipment for gynaecological investigation and diagnosis, Instruments for the minimal-invasive surgery (MIS)
Gps - MEDICAL DEVICES - MEDICAL DEVICES ASSEMBLING
Contacts: Mr Ernesto Giacometti - tel: +39-(0)35-4376456 - gps@gpsmedical.com
Founded in 1982, G.P.S. was imposed quikly on domestic and international markets thank to design and manufacture of a disposable vaginal speculum equipped with a patented mechanism adjustment and locking screw on the side.
Came out this way from our factory, the first vaginal speculum screw side product in Europe, which gave way to a unbroken chain of over 150 million items produced.
All this makes our company the leading European producer in this area.
Over the years the range has greatly expanded, so that now are three models of vaginal specula,
along with many other items for obstetrics and gynechology products in compliance with ISO9002 and CE Mark
Over time, other product line have been outlined, in particular electrosurgical, which is resulted in the production of the first disposable electrosurgical handpiece produced in Italy.
Related to this product there are a wide range of disposable and reusable.
Founded in 1982, G.P.S. was imposed quikly on domestic and international markets thank to design and manufacture of a disposable vaginal speculum equipped with a patented mechanism adjustment and locking screw on the side.
Came out this way from our factory, the first vaginal speculum screw side product in Europe, which gave way to a unbroken chain of over 150 million items produced.
All this makes our company the leading European producer in this area.
Over the years the range has greatly expanded, so that now are three models of vaginal specula,
along with many other items for obstetrics and gynechology products in compliance with ISO9002 and CE Mark
Over time, other product line have been outlined, in particular electrosurgical, which is resulted in the production of the first disposable electrosurgical handpiece produced in Italy.
Related to this product there are a wide range of disposable and reusable.
Product category: Disposable articles for hospitals
Alkimia - LABORATORY INSTRUMENTS AND REAGENTS
Contacts: Mr Giuliano Paltrinieri - tel: +39-(0)535-51072
Scientific instruments, reagents, technical assistance and calibration
UNI EN ISO 9001:2008
Born in 2001, Alkimia has become a reference Company distributing laboratory instruments and reagents as well as providing qualified technical services (assistance, calibration, etc.) all across Italy.
We distribute Potentiometric and Karl Fischer Titrators, Density meters and Refractometers, analytical and technical scales for laboratory and industry, laboratory furniture, pH meters and electrodes and viscosity meters as well as ovens, incubators, climatic chambers, stirrers, etc.
The key to our success is an attentive and accurate selection of highly qualified suppliers from Italy and abroad in order to provide innovative and high quality products to our customers.
Our Technical Dept. guarantees qualified and expert after-sales services, helping us building strong and long lasting relationships with our customers.
Everyday we look forward to establish new objectives as a way to increase and improve our product range and services for our customers.
Product category: Disposable articles for hospitals
Linaus srl - MEDICAL DEVICES - RESEARCH & DEVELOPMENT
Contact: Mr Alberto Kinzer - tel +39 (0)45 46 47 576 - amministrazione@linaus.net
Our mission is to invent, design and build innovative medical devices, which guarantee patient hygiene directly in bed, transforming the practices currently in use into safer and more rewarding experiences, both for patients and nurses.
Our mission is to invent, design and build innovative medical devices, which guarantee patient hygiene directly in bed, transforming the practices currently in use into safer and more rewarding experiences, both for patients and nurses.
Product category: Disposable articles for hospitals
Francesco Franceschetti Elastomeri - PLASTIC MATERIALS
Contacts: Mr Andrea Roberto - tel: +39-(0)30-9860511 - info@marfranmed.it
Francesco Franceschetti Elastomeri founded in 1987 started its production in the formulation and compounding of thermoplastic elastomers (TPE/TPO ) under the trade name MARFRAN: Innovative and tailor made solutions of granules compounds for different different applications in the markets of sports, automotive, construction, electronics, housewares, toys and tools.
After focused investments in plants , area and certification our company started in 2014 the development and since March 2015 the production of Medical and pharmaceutical certificated thermoplastic compound under the trade name MARFRAN.MED.
The study, the formulation and implementation of these compounds allow proposing on the market biocompatible medical device, materials complying with the stringent requirements of the industry.
In accordance with the ISO 9001 and ISO 13485 (medical device manufacturing) norms, the transformation processes are carried out in a closed system, highly automated and subject to frequent cleaning procedures, and in the same time in order to ensure the biocompatibility of the compound, the choice of each single raw materials contained in the formulation plays a basic role.
The selection of the raw materials, the application of the required procedures and the dedicated clean room allow obtaining the compliance of the various tests described in the ISO 10993 and USP Class VI norms (certifications performed at StudioAmbiente and Biochem Studio).
The certification of the MARFRAN.MED compounds, entrusted to an external enterprise, is performed on numerous representative samples of the different formulations and represents the “pass” for the entire range of the MARFRAN.MED compounds. A copy of the certificates is available upon the customer’s request.
The range of MARFRAN.MED products finds application in the production of countless semi finished products dedicated to the medical and pharmaceutical industry: lines of infusion and transfusion, drain bags, nasogastric catheters, hemo dialysis, urodynamics, catheter, irrigation, balloons for gynecology, oxygen therapy devices, surgical instruments, tubing for peristaltic pumps, micro extrusion medical tubes, micro-stamping of semi-finished medical products, latex free micro balloons, breathing bags, overmoulded components, fittings, Luer lock, disposable elastic membranes, breathing systems, dispensers, devices for manometers, gaskets for components, products for orthopedics, masks, containers for analysis, valves, clamps…
Francesco Franceschetti Elastomeri founded in 1987 started its production in the formulation and compounding of thermoplastic elastomers (TPE/TPO ) under the trade name MARFRAN: Innovative and tailor made solutions of granules compounds for different different applications in the markets of sports, automotive, construction, electronics, housewares, toys and tools.
After focused investments in plants , area and certification our company started in 2014 the development and since March 2015 the production of Medical and pharmaceutical certificated thermoplastic compound under the trade name MARFRAN.MED.
The study, the formulation and implementation of these compounds allow proposing on the market biocompatible medical device, materials complying with the stringent requirements of the industry.
In accordance with the ISO 9001 and ISO 13485 (medical device manufacturing) norms, the transformation processes are carried out in a closed system, highly automated and subject to frequent cleaning procedures, and in the same time in order to ensure the biocompatibility of the compound, the choice of each single raw materials contained in the formulation plays a basic role.
The selection of the raw materials, the application of the required procedures and the dedicated clean room allow obtaining the compliance of the various tests described in the ISO 10993 and USP Class VI norms (certifications performed at StudioAmbiente and Biochem Studio).
The certification of the MARFRAN.MED compounds, entrusted to an external enterprise, is performed on numerous representative samples of the different formulations and represents the “pass” for the entire range of the MARFRAN.MED compounds. A copy of the certificates is available upon the customer’s request.
The range of MARFRAN.MED products finds application in the production of countless semi finished products dedicated to the medical and pharmaceutical industry: lines of infusion and transfusion, drain bags, nasogastric catheters, hemo dialysis, urodynamics, catheter, irrigation, balloons for gynecology, oxygen therapy devices, surgical instruments, tubing for peristaltic pumps, micro extrusion medical tubes, micro-stamping of semi-finished medical products, latex free micro balloons, breathing bags, overmoulded components, fittings, Luer lock, disposable elastic membranes, breathing systems, dispensers, devices for manometers, gaskets for components, products for orthopedics, masks, containers for analysis, valves, clamps…
Product category: Disposable articles for hospitals
Modenplast - PLASTIC MATERIAL EXTRUSION - MACHINES FOR PLASTIC MATERIAL PROCESSING
Contacts: Ms Alice Brambilla - tel: +39-(0)536-843826 - modenplast@modenplast.com
Modenplast Medical S.r.l. has over 40 years of experience in the medical grade PVC production for extrusion and injection moulding.
Our company is renowned for the production of PVC compounds of variable hardness including those from 60 shore A/15” to 78 shore D/15”.
Following the medical sector’s requirements, our company developed also a range of PVC DEHP FREE products free from phthalate based plasticizers, upon request we are able to formulate particular compounds according to customers specific requirements.
Our compounds can be sterilised by ETO, Gamma and Beta rays and for some applications also by steam.
We have an internal laboratory that performs the chemical and toxicological analysis to assure complete conformity with European Pharmacopoeia. Every batch of material is followed by a certificate of conformity which grants its chemical and physical a suitability for medical use
Complete analyses are carried out periodically by approved external laboratories in order to verify the chemical and biological conformity of Modenplast products according to USP Class VI and ISO 10993-1.
Modenplast Medical supplies also a wide range of tubing of different dimensions made with various materials used generally in the medical sector such as PVC, PVC DEHP FREE, EVA, TPU and PE. The extrusion process takes place in two Clean Rooms ISO Class 8 (EN ISO 14644-1/2) and uses automatic laser calibrators for continuous control of diameters, connected to a printer for graphic displays of the measurements obtained. The visual and dimensional inspection of the finished product is performed by our Quality Control Dept. (according to ISO 2859-1).
The tubing can be supplied in reels, cut or pre-cut.
Below a list of the tubing we can manufacture:
MONOLUMEN TUBING
ANTI-KINKING TUBING
CO-EXTRUDED TUBING
TUBING WITH INSERT
UV PROTECTION TUBING
RADIO-OPAQUE TUBING
MARKED TUBING
BUBBLE TUBING
TWIN TUBING
TRIPLE TUBING
Modenplast Medical srl is able to share his Know-how, by providing the customer with complete extrusion and coestrusion equipments or single parts of it.
Modenplast Medical S.r.l. has over 40 years of experience in the medical grade PVC production for extrusion and injection moulding.
Our company is renowned for the production of PVC compounds of variable hardness including those from 60 shore A/15” to 78 shore D/15”.
Following the medical sector’s requirements, our company developed also a range of PVC DEHP FREE products free from phthalate based plasticizers, upon request we are able to formulate particular compounds according to customers specific requirements.
Our compounds can be sterilised by ETO, Gamma and Beta rays and for some applications also by steam.
We have an internal laboratory that performs the chemical and toxicological analysis to assure complete conformity with European Pharmacopoeia. Every batch of material is followed by a certificate of conformity which grants its chemical and physical a suitability for medical use
Complete analyses are carried out periodically by approved external laboratories in order to verify the chemical and biological conformity of Modenplast products according to USP Class VI and ISO 10993-1.
Modenplast Medical supplies also a wide range of tubing of different dimensions made with various materials used generally in the medical sector such as PVC, PVC DEHP FREE, EVA, TPU and PE. The extrusion process takes place in two Clean Rooms ISO Class 8 (EN ISO 14644-1/2) and uses automatic laser calibrators for continuous control of diameters, connected to a printer for graphic displays of the measurements obtained. The visual and dimensional inspection of the finished product is performed by our Quality Control Dept. (according to ISO 2859-1).
The tubing can be supplied in reels, cut or pre-cut.
Below a list of the tubing we can manufacture:
MONOLUMEN TUBING
ANTI-KINKING TUBING
CO-EXTRUDED TUBING
TUBING WITH INSERT
UV PROTECTION TUBING
RADIO-OPAQUE TUBING
MARKED TUBING
BUBBLE TUBING
TWIN TUBING
TRIPLE TUBING
Modenplast Medical srl is able to share his Know-how, by providing the customer with complete extrusion and coestrusion equipments or single parts of it.
Product category: Disposable articles for hospitals
Tecno system - MACHINES FOR PLASTIC MATERIAL PROCESSING
Contacts: Dr. Marco Rubbi - tel +39-(0)532-858883 - commerciale@tecnosystemfe.it
Tecno System is amongst the leading companies in the development of systems for thermoplastic profiles, placing a special accent on extrusion lines for medical pipes (single or multi layer) made of soft PVC, TPU, FEP and other medical grade raw materials. Special care in the construction phase, proverbial robustness and reliability of the single units and high speed extrusion make the Tecno System’s medical tubing extrusion lines very popular among the customers in Italy and abroad. Applying cutting edge technologies, all the most recent achievements in automation and mechanics, as well as close cooperation with the raw material producers in development of improved screw geometry are warranty for successful implementation of these lines in the modern production facilities.
Tecno System is amongst the leading companies in the development of systems for thermoplastic profiles, placing a special accent on extrusion lines for medical pipes (single or multi layer) made of soft PVC, TPU, FEP and other medical grade raw materials. Special care in the construction phase, proverbial robustness and reliability of the single units and high speed extrusion make the Tecno System’s medical tubing extrusion lines very popular among the customers in Italy and abroad. Applying cutting edge technologies, all the most recent achievements in automation and mechanics, as well as close cooperation with the raw material producers in development of improved screw geometry are warranty for successful implementation of these lines in the modern production facilities.
About us
Company portrait
Our Consortium
CONSOBIONET is a young consortium founded in Medolla in 2015 including small and medium size companies working in the medical sector and not only, present throughout the Italian territory.
Products
Consobionet brings companies with high skills tecnology together, in the production of medical devices and even beyond
Contact Us
Write us to get further information!
We will be glad to send you the requested information and answer all your questions!
Those who turn to Consobionet can find 360 degrees support: the member companies already provide services/products that cover all areas related to the medical sector, providing the long experience of all its members, in a single consortium.
The companies included in Consobionet consortium that partecipates and this exhibitions are:
MEDIFLY - www.medifly.it
MEDIFIT - www.medifit.tech
MEDILINE - www.mediline.eu
ROCCA GROUP - ROSATO - www.rosatoclogs.com
GPS - www.gpsmedical.com
SILPLAST - www.silplastsrl.it
ALKIMIA - www.alkimiasrl.it
DEAS - www.deasnet.it
FRANCESCO FRANCESCHETTI ELASTOMERI - www.marfranmed.it
MODENPLAST - www.modenplast.com
TECNO SYSTEM - www.tecnosystemfe.it
CONSOBIONET is a young consortium founded in Medolla in 2015 including small and medium size companies working in the medical sector and not only, present throughout the Italian territory.
Products
Consobionet brings companies with high skills tecnology together, in the production of medical devices and even beyond
Contact Us
Write us to get further information!
We will be glad to send you the requested information and answer all your questions!
Those who turn to Consobionet can find 360 degrees support: the member companies already provide services/products that cover all areas related to the medical sector, providing the long experience of all its members, in a single consortium.
The companies included in Consobionet consortium that partecipates and this exhibitions are:
MEDIFLY - www.medifly.it
MEDIFIT - www.medifit.tech
MEDILINE - www.mediline.eu
ROCCA GROUP - ROSATO - www.rosatoclogs.com
GPS - www.gpsmedical.com
SILPLAST - www.silplastsrl.it
ALKIMIA - www.alkimiasrl.it
DEAS - www.deasnet.it
FRANCESCO FRANCESCHETTI ELASTOMERI - www.marfranmed.it
MODENPLAST - www.modenplast.com
TECNO SYSTEM - www.tecnosystemfe.it
Company data
Foundation
2015
Area of business
- Imaging and diagnostics / medical equipment & devices
- Laboratory equipment
- Disposables and consumables
